Fossil Energy Equipment In Jordan
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
More than 1000 KAHL belt units are in operation worldwide and work in different sectors. Before you decide on a belt drier, you have the opportunity to perform a belt drier simulation for your project in our pilot ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
Manufactured by B.M.I Bassoumi Metal Industriesbased in JORDAN
Tipper up to 100 Tons payload. Flatbed. Flatbed with crane. ADR Approved Fuel tanker / Aluminum And C.S. ADR Approved acid tanker / Stainless Steel. ADR Approved LPG tanker. Cement Silo, Aluminum And CARBON STEEL. Lowbed Up to 100 ...
-
Manufactured by Capstone Green Energybased in USA
Capstone power generation solutions help to improve operations by putting the end-user in control of their energy costs. Advanced engineering and more than 100 patents put Capstone microturbines in a class of their own. By integrating an aero-based turbine engine, a magnetic generator, advanced power electronics, with patented air bearing technology, Capstone microturbines are the ideal ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
Manufactured by AAK Service Srlbased in ITALY
Turbojet is a high-speed burner, working with natural gas and GPL. It introduces the combustible gases in the kiln, at a speed measurable around 130 m/sec and therefore offering three main advantages: a uniform distribution of the temperature in the kiln sections, consequence of the turbulence generated by the high speed and the mixing of burning gases with the air around; an equal heating of ...
-
Manufactured by Capstone Green Energybased in USA
Expandable Can be paralleled up to 30MW of power. Your location could not be detected. Please allow www.capstoneturbine.com to detect your location to find the distributor that services your region. If you previously blocked CapstoneTurbine from knowing your location, click the location marker symbol in your address bar to fix ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Detailed information is available in our dedicated Coal, Coke & Iron Ore Testing Furnaces brochure (please download above). Carbolite Gero has developed a range of coal and coke testing furnaces and ovens for proximate analysis to qualitatively assess or, quantitatively measure, the amount of moisture, ash, volatile matter and fixed carbon in coal samples. Other products are also available ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The CAF 16/38 is designed to test coal ash fusibility according to BS ISO 540:2008. The CAF 16/38 requires manual observation and recording of the transition points. In addition, a CAF furnace with automated digital image capture and archiving using Windows compatible software, the Coal Ash Fusibility Test Furnaces CAF G5, is ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The GLO annealing furnace features a vacuum tight retort with highly symmetric positioning of the heating elements. The heating elements are CrFeAl, also known as APM, and are embedded in the ceramic fibre insulation. The GLO is often equipped with a vacuum pumping system to reduce the Oxygen levels prior to heat treatment. To ensure the lowest possible contamination levels, several cycles of ...
-
Manufactured by Muntersbased in USA
VariMax IFRG combines Des Champs Products heat-exchanger design with indirect heating technologies to deliver contaminant-free process air with very high efficiency. Recirculation of the combustion gases allows the heater to attain an efficiency of 90%, 1,000°F (555°C) temperature rise, 1,200°F (649°C) discharge temperature, and a 40:1 ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The VMF is specifically designed for testing the volatile matter of ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The SNF furnace is designed to test the swelling index number of coal in accordance with the following standard test methods. BS 1016-107.1:1991 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of crucible swelling ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
CDHT (Coal Drying High Temperature) and CDLT (Coal Drying Low Temperature) ovens are suitable for drying coal in accordance with the following standards: ASTM D2691 – 01, ASTM D2961 – 01a, ASTM D2961 – 02, ASTM D2961 – 95a, ASTM 3302 / D3302M-10, BS 1016-102:2000, BS 1016-1:1973, BS ISO 13909-1:2001, BS ISO ...
-
Manufactured by Muntersbased in USA
The VariMax™ OTH (Once-Through Heater) is a high efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion. The OTH is well-suited for recirculating ovens, dryers, makeup-air applications in cold environments, and industrial processes with moderate temperature rises. The counterflow configuration, ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen (O2) and fuel in premix gases, operating in either excess fuel or excess air conditions. It has the capability to measure the air/fuel ratio in open-flame applications where flue gas measurements are not practical, with measurement and display options including excess O2, excess fuel, oxides/fuel ratio and ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Heavy duty applications: For heavy duty applications most furnaces are equipped with a hard wearing chamber hearth and higher rated heating elements for faster heat up and longer ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you