Fossil Energy Equipment Near Latin America
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
TBC on Charcoal Tube Bed A 400 mg, Bed B 200 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
W,F,F separators, O.D. × L 6 mm × 75 mm, pkg of 50 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
W,F,F separators, O.D. × L 6 mm × 80 mm, pkg of 50 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
TBC on Charcoal Tube Bed A 100 mg, Bed B 50 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
ORBO 34 matrix activated coconut charcoal (specially ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
W,W,F separators, O.D. × L 8 mm × 110 mm, pkg of 50 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
ORBO 33 matrix Activated petroleum charcoal ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
ORBO 353, 100/50 mg, 25 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
ORBO 354, 100/50 mg, 50 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Petroleum Charcoal Tube Bed A 400 mg, Bed B 200 ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
More than 1000 KAHL belt units are in operation worldwide and work in different sectors. Before you decide on a belt drier, you have the opportunity to perform a belt drier simulation for your project in our pilot ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire burner tip. Upon mixing at the flare ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven Flame Ring Flare Technology is recommended in low-BTU ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Triton sonic flare technology allows for safe, efficient and smokeless flaring at elevated oil and gas production rates by injecting sea water into the flame envelope. High pressure sea water injection reduces flare emissions, helps minimize overall radiation levels from the flame, abates combustion noise, and preserves flame characteristics during high wind events. The Triton sonic flare is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas streams or assist air; two mediums normally used to ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON offers our own WILDCAT natural gas compression systems for wellhead applications as rental or lease equipment. Through testing, we can identify flow improvement up front and determine the appropriate standard system for your gas compression and budgetary needs. AEREON's gas compression systems have been used successfully for many years. Systems installed on coal bed methane wells, gas ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 850 Pilot is a time-proven product that combines electric spark ignition with continuous spark monitoring, thermocouple monitoring, and retractability. The combination of these highly-demanded features has made the high-alloy, stainless steel Model 850 Pilot one of the most well-received ignition systems on the market. This electric pilot provides a rapid, direct spark every 10 to 20 ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 245 Fuel Efficient Flare Pilot is a high alloy, stainless steel pilot composed of fuel gas line, ignition line, inspirator and optional thermocouple. The pilot head assembly includes a 310 stainless steel flame retention nozzle and wind shroud for extended service life capable of sustaining a stable flame in winds of up to 150 mph. Fuel gas passes through an inspirator at the base of ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Infilco Degremont has supplied more fluid bed incineration systems in North America than any other vendor. Our specialized incineration experts were recently awarded a U.S. patent for inventing a method to remove mercury and nitrogen oxides from combustion flue ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you