Only show results in Connecticut? Ok

Fossil Energy Services

  • Energy & Environment Biomass Services

    Biomass is biological material derived from living, or recently living organisms. Biomass is often used as a term to mean plant based material, but can equally apply to both animal and vegetable derived material. The use of biomass in the form of ‘energy’ crops to produce fuel that can be used either directly, or through additional ...

    By PROjEN PLC based in Runcorn, UNITED KINGDOM. from Energy & Environment Services Service line

  • Engineering / Design Services

    Anchoring/Securing Cable routing Plant sizing/Configuration Interface design (fixtures) Site modelling Hydro/Hybrid Design & Optimization Hybrid/Storage Design & Optimization Diesel/Hybrid Design & Optimization.

    By New Energy Corporation Inc. (NECI) based in Calgary, ALBERTA (CANADA).

  • Utility Companies

    Utility companies, including the generation & distribution sides, across the United States are responsible for providing the transmission, distribution, and generation services to energy customers in their associated territories. In deregulated areas, utilities have spun-off the energy generation side of their businesses. They now only provide ...

    By Accruent based in Austin, TEXAS (USA). from Smart Grid Participants Service line

  • Boiler Ignition Services

    Boiler fuel tank must be filled with 25-30 kg of pellets then closed. To start boiler ingnition keep “right” button on control panel pressed until you hear an audible signal. After the audible signal the red LED “mode” starts flashing on the control panel display shows: “Ignition Sr: 360 s, Kt: 20.4”. Sr(fuel ...

    By JSC Biokaitra based in Vilnius, LITHUANIA.

  • Medical Gas Certifications

    RPC has over 20 years of experience providing medical gas certifications in the Atlantic Provinces for all new and renovated medical gas pipeline distribution systems. Our experienced staff can help to protect against costly mistakes and omissions by performing a pre-construction review of proposed mechanical plans for medical gas piping systems. ...

    By RPC (Research and Productivity Council) based in Fredericton, NEW BRUNSWICK (CANADA).

  • Energy Management Services

    ThermalTech has performed over 750 energy audits in all types of buildings across the country.  Our energy audit history began in 1980 with Federal Title III audits in office buildings, colleges and universities throughout Ohio, Kentucky and Indiana.  Since those early days we developed, incorporated and improved our energy auditing ...

    By ThermalTech Engineering based in Cincinnati, OHIO (USA). from Energy Service line

  • Targray - Biodiesel Marketing

    Supported by an extensive network of managed rail cars and fuel terminals, Targray is focused on creating wholesale biodiesel solutions that intelligently address the growing global demand for low-carbon fuels.Our innovative biodiesel procurement programs help fuel retailers, diesel distributors, commodity traders and transportation companies ...

    By Targray based in Kirkland, QUEBEC (CANADA).

  • Coal-Fired Boiler Services

    Our Boiler services team was created to answer the demand of today is third party evaluations concept, independent of owner and manufacturer, and to provide an accurate survey of equipment's conditions. Our highly qualified staff has an average of over 30 years experience in Boilers, Pressure Vessels, Pipings and various Nondestructive Examination ...

    By EEC Engineering JSC. based in Hanoi, VIETNAM.

  • Consulting Services

    With our consulting services we address the technology contractor and investors as well as banks, public organisations, and sponsor agencies. In this context provide studies and expertise. Our services include: Bio mass combustion and energy use: sub-area small combustion (< 500 kW thermal, sub-area medium-size and large combustion. ...

    By BIOENERGY 2020+ GmbH based in Graz, AUSTRIA.

  • TSG Pump/Module Durability Testing Services

    TSG offers pump/module durability testing services that feature: -30C to +80C temperature range. Duty cycling. Real time data collection. Cert stock & splash blend fuels. Flex & Bio-fuel compatible. Voltage cycling, voltage dither. Elevated temperature soak vessels. Contamination testing. Safe operation in Class I, Division I rated test ...

    By Testing Services Group, LLC based in Lapeer, MICHIGAN (USA). from Automotive Service line

  • Fill Testing

    The Fill Laboratory at TSG offers clients a controlled environment in which to conduct fill tests.  Fill protocols at TSG available to all customers include nearly all major OEM as well as customer defined procedures.  In addition to controlling the fill rate during testing, the TSG fill lab features the ability to set fuel temperature ...

    By Testing Services Group, LLC based in Lapeer, MICHIGAN (USA). from Automotive Service line

  • Stirling Engine

    Within the scope of a R+D&D (research, development and demonstration) cooperation a small-scale CHP technology with a 35 kWel and a 70 kWel Stirling engine for biomass fuels has been designed. A 35 kWel pilot plant was put into operation in 2002 and was successfully tested for more than 10,000 hours. A second pilot plant with a 70 kWel engine ...

    By BIOS BIOENERGIESYSTEME GmbH based in Graz, AUSTRIA.

  • Diesel Generator Service & Maintenance

    Hydro-Gen offer a full and comprehensive diesel generator service and maintenance package ensuring that your Diesel Generator is at its most reliable. We know that having a generator break down is no’t an option for many companies, when you are relying on your diesel generator day in day out, it is essential that it is regularly maintained ...

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM. from Diesel Generators UK Service line

  • Diesel Testing as per DIN EN 590 Specification

    DIN EN 590 is a standard defined by European Authorities to test the physical properties of diesel for sale purpose. It is necessary for all diesel fuels to meet the standards which are used in European countries. There are numerous companies following the same standards even in Middle East. Below is a list of parameters and their associated test ...

    By Accredited Test Laboratories based in Dubai, UNITED ARAB EMIRATES. from Diesel Testing Service line

  • Service Technician Skills/Knowledge Test

    Designed to recognize the high performing technicians in dealerships or used for evaluating prospective technicians during the hiring process, dealers have found this test to be both an efficient and cost-effective tool for evaluating current and potential employees.

    By Western Equipment Dealers Association (WEDA) based in Calgary, ALBERTA (CANADA).

  • PBS - Grinding and Inspection of Gears

    Grinding and measurement of cylindrical gears with outer involute straight or helical gearing.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC. from Special Technologies Service line

  • Component Repairs Services

    Trinity Turbine Technology, LP provides superior quality component repair and coating services for all major components including all styles of combustion components, buckets and blades, nozzles and vanes. We have developed innovative coupon repair procedures for several nozzle and vane segments that have proven to safely extend the life of these ...

    By Trinity Turbine Technology LP based in Iowa Colony, TEXAS (USA).

  • Climate & Energy

    Climate change issues have become embedded in nearly all Ecorem projects. Regional adapation plans or concrete mitigation measures have been subject of many consultancy and engineering services. Ecorem refers to an integrated approach of the climate issues, with links to other environmental areas, such as water, waste, biodiversity, etc. Expertise ...

    By Ecorem NV based in Aartselaar, BELGIUM.

  • Renewables & Sustainability Energy Services

    Are you planning to install renewable technologies to produce electricity and heating? Before you do, let ARAMARK Environmental Services help you with our independent advice services.Commission one of our renewable technology evaluation studies and we will advise you on the most suitable renewable technology for your application. Our typical study ...

    By ARAMARK Environmental Services based in Douglas, UNITED KINGDOM.

  • DP - Fuel Assessment Consultancy Services

    The first and most vital step in the process requires an extensive evaluation and understanding of the fuel type and condition. Many variations in form, chemical composition, calorific value and moisture content exist between fuels, all of which are important to the power plant design. For example, woody fuels typically have higher moisture ...

    By DP CleanTech based in Jiyuqiao, Wuchang District, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you