Only show results available in Virginia? Ok

Waste Oil Energy equipment for Fossil Energy

  • Waste Heat Boilers (WHB)

    Waste Heat Boilers (WHB) on industrial process heat recovery: FCC (Fluid Catalytic Cracking), Phtalic Anhydride, Steel Mill Sulphur, Visbreaking. Horizontal and Vertical Design – Natural or Assisted Circulation. Steam capacity up to 250 t/h – 550,000 lb/h, Steam op. pressure up to 140 barg – 2,030 psig, Steam op. temperature up ...

    By Macchi - - Sofinter Group based in Gallarate, ITALY.

  • Direct Firing Heaters

    The NESS Thermal oil heater - the core component of your heating supply system.

    By Ness Wärmetechnik GmbH based in Remshalden, GERMANY. from Direct Firing Heaters Product line

  • Universal Oil Burner 350-400 kW

    A burners that allows to save of heating costs while giving you comfort, reliability and easy maintenance. The burner is perfectly suitable for different used motor oils, vegetable oils and thick diesel or spirits and conventional heating oils.Designed and manufactured in Latvia. This is the perfect investment for those who have access to cheaper ...

    By Lat-Set based in Riga, LATVIA.

  • Exergy - Model EP ERS - Heat Recovery Power Production Units

    High-temperature waste heat can become a renewable source of energy. The non-flammable working fluid makes Exergy EP products perfect for any industrial application from 500 to 2000 kWe and the Enhanced Recovery System (ERS) helps you extract the maximum amount of heat from your flue gas. Thanks to the radial outflow turbine, the superheated cycle ...

    By Exergy S.p.A. - Maccaferri Industrial Group based in Legnano, ITALY.

  • Model EL 200B - Waste Oil Boiler

    Experience the EL 200B Boiler that comes with a ASME ceritifiedvessel construction - the only boiler vessel built specifically for waste oil from the ground up. The heavy carbon-steel construction is stronger and more efficient than cast-iron and coil-tube boilers provided by other brands. With a removable rear panel, the process for cleaning is ...

    By EnergyLogic, LLC based in Antioch, TENNESSEE (USA). from Waste Oil Boiler Product line

  • Tuffa - Model 3500VB WOS - Plastic Bunded Waste Oil Tank

    Type: Fully bunded MDPE Tank. Brim full capacity: 3500 * . Diameter (mm): 2000. Height (mm): 2500. Colour: Black

    By Tuffa UK Limited based in Uttoxeter, UNITED KINGDOM. from Plastic Bunded Waste Oil Tank Product line

  • Phoenix - Model 10 - Phoenix Waste Oil Electrical Generators

    The Phoenix Waste Oil Electrical Generator (genset) is a state-of-the-art generator system that is capable of utilizing waste oil products (i.e., used motor/equipment oil) or low cost Natural Gas to produce electricity for operational needs, to transfer excess power to a power grid, and/or provide heat to the ambient working environment (Combined ...

    By Phoenix Power Group LLC based in Cordova, TENNESSEE (USA).

  • Custom Waste Oil Vacuum Tank

    This Custom Waste Oil Vacuum Tank built for the collection of restaurant oil and waste oil has the dual benefit of pumping oil in the warmer climates and swapping drums of oil in the cold weather.  It has a capacity up to 2,000 gallons.  Crescent Tank has incorporated the trucks exhaust system through the internals of the waste tank to ...

    By Crescent Tank Mfg based in Bloomfield, NEW YORK (USA).

  • Fluidised Bed Combustion System

    Fluidised bed combustion with ash cooling and controlled ash recirculation. Ash cooling heat exchanger positioned outside of combustion area. Capacity: 500 kW - 50,000 kW. Fuels: Biomass, coal (anthracite and lignite). Waste heat recovery media: Thermal oil, steam, hot water.

    By INTEC Engineering GmbH based in Bruchsal, GERMANY.

  • OMNI - Model OWH-75 - Waste Oil Heaters

    Every OMNI waste oil heater is built with high grade stainless steel, and is backed with a non pro-rated warranty to match. From the Floating Crimped Heater Exchangers, to the Patented Flame Control System, our waste oil heaters will provide you with long lasting ROI.

    By EconoHeat Inc. based in Spokane, WASHINGTON (USA).

  • Probus - Universal Oil Burner 70 kW

    A burners that allows to save of heating costs while giving you comfort, reliability and easy maintenance. The burner is perfectly suitable for different used motor oils, vegetable oils and thick diesel or spirits and conventional heating oils.Designed and manufactured in Latvia. This is the perfect investment for those who have access to cheaper ...

    By Lat-Set based in Riga, LATVIA.

  • STAFCO - Waste Oil Tanks

    Recycling of used oil is good for the environment and makes excellent business sense. When you need a safe solution for storing your used oil, STAFCO can help. If your business is involved with used oil collection, utilizes used oil to heat your facility, a generator of used oil, a used oil handler, processor, or re-refiner; STAFCO can manufacture ...

    By Steel Tank and Fabricating Corp. based in Columbia City, INDIANA (USA). from Waste Oil Tanks Product line

  • Model EL 200H - Waste Oil Heater

    The EL 200H Waste Oil Heater has all the perks of the EL 140H and more! Its stainless steel heat exchanger is designed to avoid corrosion, warping and weld breakage. Constructed to last decades, not years. With an elevated fuel pack, the pump can be mounted at the fuel source—instead of on top of the tank—so the pump is flooded with ...

    By EnergyLogic, LLC based in Antioch, TENNESSEE (USA). from Waste Oil Heater Product line

  • Clean Burn - Model CB 140 - Waste Oil Furnace

    The Clean Burn Model CB-140 is the smallest and most economical Clean Burn used-oil furnace in terms of initial cost. It produces approximately 140,000 BTU/hr. and is ideal for small garages, shops, and workspaces.

    By Clean Burn, LLC based in Janesville, WISCONSIN (USA). from Waste Oil Furnace Product line

  • Clean Burn - Model CTB-350 - Waste Oil Boilers

    The Clean Burn Model CTB-350 waste oil boiler has an input rating of 350,000 BTU/hr and an output rating of 260,00 BTU/hr. The CTB-350 is UL listed for use in central heating systems. With the mid-sized CTB-350, you spend 30 minutes cleaning every 1000 hours of operation. It is uniquely designed for installation flexibility. Engineered for use as ...

    By Clean Burn, LLC based in Janesville, WISCONSIN (USA). from Waste Oil Boilers Product line

  • SUNY GROUP - Waste Oil Distillation Plant

    Waste Oil Distillation Plant(Waste Oil Distillation Plant:http://www.tirerecyclemachine.com/) is project of Suny Group use the sludge,waste engine oil, tyre pyrolysis oil,plastic pyrolysis oil, sump oil as raw material, use the special distillation and refining technology to get oil. Waste Oil Distillation Plant can make the oil yield reach as ...

    By Zhengzhou Zhengyang Machinery based in Zhengzhou, CHINA. from Waste Oil Distillation Plant Product line

  • Probus - Universal Oil Burner 35 kW

    A burners that allows to save of heating costs while giving you comfort, reliability and easy maintenance. The burner is perfectly suitable for different used motor oils, vegetable oils and thick diesel or spirits and conventional heating oils.Designed and manufactured in Latvia. This is the perfect investment for those who have access to cheaper ...

    By Lat-Set based in Riga, LATVIA.

  • Probus - Universal Oil Burner 150 - 200 kW

    A burners that allows to save of heating costs while giving you comfort, reliability and easy maintenance. The burner is perfectly suitable for different used motor oils, vegetable oils and thick diesel or spirits and conventional heating oils.Designed and manufactured in Latvia. This is the perfect investment for those who have access to cheaper ...

    By Lat-Set based in Riga, LATVIA.

  • OMNI - Model OWB-9 - Waste Oil Boilers

    The OMNI OWB Series Hot Water Boiler is designed for years of industrial heating. Viessmann, the Worlds Largest Boiler Manufature’s cast iron Scotch Marine boiler design, perfectly engineered with OMNI Waste Oil burning technology brings unparalleled performance in a flexible package.

    By EconoHeat Inc. based in Spokane, WASHINGTON (USA).

  • Model CE-180 - Waste Oil Furnace

    Our CE-180 Waste Oil Furnace is a strong performer for a 3 to 6 bay garage. With up to 175,000 BTU’s of output coupled to an innovative design, it’s a cost-effective and eco-friendly way to heat garages, workshops and other small to medium-sized spaces. And thanks to its ability to turn used motor oil, transmission fluid and other ...

    By Clean Energy Heating Systems based in Honey Brook, PENNSYLVANIA (USA). from Waste Oil Furnace Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you