Fossil Fuels Applications available in Oklahoma

  • Premium

    Monitoring solutions for the flue gas desulphurisation

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Machine condition monitoring for power generation

    Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil analysis capabilities in house.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Application package FLUXANA Ash

    This application package is a 'ready to go' calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the bench. It can for example contain all parts to perform a complete ash analysis: - Calibration set ash prepared from CRM and primary oxides as glass beads - Calibration work performed by FLUXANA expert 3 days on site - 3x drift monitors for xrf instrument - 7x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. If you combine our application packages with our sample preparation machines we guarantee the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high temperature without combustion with controlled amounts of oxygen (O) or steam. The composition of the base material combined with the amount of oxygen and heat used in the process affects the composition of the resultant SynGas, in which the CO can vary between around 20 and 60%. In addition, large amounts of H and CO are also formed. The measurement of CO is therefore an important feature in the production of SynGas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Actuators for the power generation

    As well as traditional power stations, applications for Rotork products are found on renewable energy generation such as solar thermal plants and on CO2 emissions reduction processes such as flue gas desulphurisation and carbon capture and storage.

    By Rotork based in Bath, UNITED KINGDOM.

  • Premium

    Piping & ducting solutions for the chemical/petrochemical industry

    Petrochemical products are derived from petroleum products. Many other chemical compounds are derived from other fossil fuels such as coal, natural gas, or other renewable sources such as corn or sugar cane. With over 30 years of experience in supplying the chemical and petrochemical industries with high quality expansion joints and check valves, PROCO understands the unique needs and demands that companies in these businesses face.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Premium

    Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Pumping solutions for marine

    Fluids Handled - Fuel-injection, Oil burners, Boosting, Hydraulics, Fuel, Lubrication, Circulating and Feed Pumping.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for shaft work comes out in the exhaust gases, so these have either a high temperature or a high velocity. A catalyst is often used to treat these exhaust gases to comply with emissions regulations. EmeraChem has installed OEM and after-market catalyst in over 240 applications

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Pumping solutions for fuel (waste)

    Fluids Handled - Petroleum Refining, Blending and Transporting.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Feed-in tariffs while avoiding low price periods

    Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Groundwater monitoring for oil tank leaks

    Leakwise can detect oil leaks from tank bottoms much more quickly than other manual methods, thus reducing the risk of severe groundwater contamination.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Primary air control for coal-fired power plants

    Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty `Fly Ash` laden air.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Power Piping Solutions

    ISCO Industries offers solutions for various power piping applications in nuclear, fossil and renewable generation facilities. Whatever your power needs, ISCO Industries supplies pipe, fittings, fabricated fittings, related piping products and more.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Waste recovery for energy & utilities

    In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental impact. This fly ash is subject to Air Pollution Control as it is contaminated with extremely high concentrations of heavy metals and toxic compounds like dioxins, linked to cancer and other health problems. Tetronics offers valuable waste recovery plants that can eliminate the hazardous element within the fly ash while generating an inert building aggregate with the remaining material.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Power Plant & Power Station Emissions Monitoring

    For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you