Fossil Fuels Articles

  • Energy consumption in production of concrete

    Concrete is the most common construction material used in building industry. On average approximately 1 ton of concrete is produced each year for every human being in the world. Because of its abundance in the world market, understanding the environmental implications of concrete manufacturing is becoming increasingly important. The production of 1 m³ of concrete requires 2,775 ...


    By Geoplast US Corp.

  • Minimum Total Harmonic Distortion on board Scandlines New Hybrid Ferries Berlin & Copenhagen - Case Study

    In 2016, Scandlines inaugurated two new hybrid ferries for the Rostock-Gedser route. In order to improve the power quality, Scandlines installed active filters on board M/V Berlin and M/V Copenhagen. Before commissioning, Scandlines’ new hybrid ferries had a power quality of THDV 15%. In order for the ferries to go into operation, the power quality had to be reduced to below 8 ...


    By DESMI A/S

  • Biological desulphurization of Landfill biogas - Case study

    Summary Biorem's biogas desulphurization product is providing very high removal efficiencies at a landfill site in Quebec. Despite the highly variable concentrations and low winter temperatures, the system has achieved an average removal efficiency of 97%, and has maintained outlet nydrogen sulphide concentration below target consistently. As a result, the customer has realized a ...


    By Biorem Technologies Inc.

  • Fly Ash & the Lightweight Aggregate Market

    In 2015, the global fly ash market was estimated to be valued at 40 billion USD. A recent industry analysis by Research Nester anticipates the market will reach an estimated 70 billion USD by the end of 2023 – a 7.1% CAGR owing to increasing ...


    By FEECO International, Inc.

  • Karl Erik Widell, professor emeritus at the University of Aalborg, Institute of Energy Technology, played a key role in the development of MagFan

    Six decades of experience and knowledge Professor Widell’s career spans over almost six decades since he graduated, and includes several advanced R&D projects for The Danish Defence Research Board, ABB, Siemens Industrial Turbomachinery, Grundfos and many other leading companies worldwide. As a leading specialist in aerodynamics on wind turbines, turbo compressors, steam turbines and ...


    By DACS A/S

  • Laboratory investigation of hydraulic characteristics of fly ash as a fill material from the aspects of pollutant transport

    Depending on the usage of fly ash, it is necessary to determine its environmental parameters, such as the potential for pollutant transport/leaching after its built-in. This study presents a methodology for determination of transport parameters (filtration coefficient, effective porosity, longitudinal dispersivity, and the mean residence time) from experimental data collected from column ...


    By IWA Publishing

  • Coal fired power plant - humidity measurement during briquetting process - Case Study

    Our subsidiary SWR Engineering has launched the M-Sens 2 sensor for the continuous measurement of humidity on solids of all kinds. It can ideally be used, for example in container outlets, conveyor belts, conveyor screws, mixers and conveyor dryers... Application An operator of a coal fired power plant uses brown coal for the ...


    By Environnement S.A

  • Nitrogen Refrigerated Trucks a New Trend? An Alternative to Diesel Powered Refrigeration

    Nitrogen Refrigerated Trucks a New Trend? An Alternative to Diesel Powered Refrigeration Thanks to technological innovations, the food distribution industry has a greener way to protect refrigerated food during transit: Nitrogen refrigeration. The existing system relies on diesel-powdered mechanical refrigeration units. Although these units are effective, they release ...

  • Case study - Plant for ash treatment, Singapore

    Engineering and planning, procurement, production and delivery of the complete plant engineering as well as installation and commissioning. The contained metal elements are removed from the slag. The metal-free slag is used as building material for a new island. Customer: Remex Mineralstoff GmbH Retention: August 2014 ...


    By Eggersmann Anlagenbau

  • Case study - Agiba Gas Power Generation

    Proserve has recently carried out a power generation project with Agiba Petroleum Company in the western desert of Egypt to utilize the waste free flare gas instead of the very expensive fossil diesel fuel to power the oil production wells ‘pumps. The project faced several technical challenges. The associated gas has a low methane number” less than 45”,  which necessitated ...


    By ProServe Egypt

  • Fueling the demand for solar systems

    Solar street lighting market valued at $15B by 2024 It’s no secret governments and companies are trending toward reducing, or eliminating, their carbon footprint, and their dependence on fossil fuels.  This is due to a number of factors including increasingly more education on environmental impacts, more transparency, and a widespread desire to be eco-friendly.  It’s ...


    By Urban Solar

  • Study: 100% Renewable Electricity System is the Cheapest Option for South America

    Transitioning to a fully renewable electricity system is possible for South America by 2030. A study by Lappeenranta University of Technology (LUT) and VTT Technical Research Centre of Finland Ltd. also shows that a 100 percent renewable system (100% RE) is the cheapest electricity production option and can be achieved with very little energy storage. "South America has a unique renewable energy ...


    By Smart Grid Observer

  • Full steam ahead: a look at steam Turbines and how the Speed of development is accelerating

    A whole ecosystem is built around steam turbine technology, consisting of manufacturers, service providers and owner operators. The technology has grown from simple marine applications to many different types of power generation, processing and other applications. Major players have pursued several approaches to growth and new product development: mergers & acquisitions; licensing and core ...


    By SoftInWay Inc.

  • Cleaning the Air We Breathe, Coal Fired Power Plant - Case Study

    By cleaning flue gases from coal power plants, the amount of environmentally hazardous emissions can be sharply reduced. Mist elimination from Munters is a critical part of this process. Munters has worked with leading power generating companies for decades and have through testing and follow up built an extensive parameter database and design tool to be able to adapt and optimize results based ...


    By Munters Zeol Division

  • WBA Fossil Exit Strategy

    After COP 21 (Paris): Fossil Exit Strategy 2030 One year after the conference in Paris, the world is moving away from the targets of COP21. The most embarrassing fact is the ongoing increase of the CO2 concentration in the atmosphere. This concentration reached 400ppm in 2014 for the first time in the human history. A value of 420 ppm is usually regarded ...

  • New Approach allows Subscribers to Reach the Summit of the Mountain of Information on Gas Turbine and Reciprocating Engine Technology

    The available information on combustion, flow control, treatment and environmental compliance for gas turbines and reciprocating engines is doubling every few years. It is now more challenging than climbing Mt. Everest to find the most current and relevant information. Rapid developments include zero liquid discharge (ZLD) technologies, repairable valves, high efficiency air inlet filters, ...


    By The McIlvaine Company

  • Case study - Procurement and installation of a Biogas desulphurization unit at the Chania WWTP

    A proposal based on Bioconservacion’s technology was selected as the winning bid in the public tender released in 2015, covering the design, procurement and construction of a biogas desulfurizing unit to be installed in the waste water treatment plant in Chania, Greece. With a population over 100,000, Chania is the second largest municipality in the Greek island of Crete. Its waste water ...


    By Bioconservacion SA

  • National Grid Winter Outlook Report 2016

    Winter is coming….and the lights will be staying on Since March this year there have been a number of developments that have raised concerns over the ability to meet the UK’s energy demand, particularly during this winter period. A number of unplanned coal plant outages in the first half of the year have tightened supply margins significantly and placed greater strain on ...


    By Inprova Energy

  • E.ON Benelux power station Maasvlakte, Rotterdam - Case Study

    Next Generation Power Production E.ON’s new Maasvlakte power station also known as MPP3 is built in the harbour of the Dutch metropolis Rotterdam. The modern supercritical hard coal fired unit with a capacity of 1100 MW is expected to have a thermal efficiency of more than 46 percent. The new plant built in the vicinity of the existing Maasvlakte station is designed as cogeneration ...

  • New Boliden Rönnskär Zinc Furnace - Case Study

    Rönnskär plant NEW BOLIDEN is the third largest copper metals supplier in Europe and handles all process stages from mining via smelting until recycling for copper, zinc and other valuable metals. The Rönnskär plant located in Skelleftehamn in northern Sweden houses one of the largest copper smelters of its kind in the world. Beside copper zinc, clinker, lead and precious ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you