Geothermal Drilling Equipment For Geothermal In Europe
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn 20, Centaur 40, Centaur 50, Taurus 60, Taurus 70, Mars 90,Mars 100 and Titan 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high pressure applications. C16 ...
-
Manufactured by Haskelbased in USA
H-Drive from Haskel is a technological evolution in the gas compression market. Designed by our team of knowledgeable experts, H-Drive Booster is configurable to a wide range of critical high pressure applications in a variety of diverse fields and hydraulic systems. It has been engineered to safely and reliably handle flows required for critical, high-pressure gas compression and transfer needs, ...
-
Manufactured by GA Drilling, a. s.based in SLOVAKIA
How PLASMABIT® drilling platform disrupts the geothermal sector? Current geothermal drilling challenges are prohibitive drilling costs, inefficiency of drilling operation at greater depths and geothermal energy availability at 3% of Earth´s surface only. Intelligent drilling platform PLASMABIT® overcomes these limits with unprecedented reliability. With our unique technology any ...
-
Manufactured by Nupi Industrie Italiane S.p.A.based in ITALY
NRGeo is the system of geothermal probes and accessories for the exploitation of geothermal energy by NUPI Industrie Italiane S.p.A., specifically designed for geothermal heat pump systems that use the ground as a heat ...
-
Manufactured by Haskelbased in USA
The future-focused innovation you need, combined with the reliability, expertise, and support you expect. Revolutionizing gas compression with smart, sustainable technology, Q-Drive is an electric servo actuated Compressed Gas System with unprecedented 4.0 intelligence, efficiency, precise control and accuracy. It delivers unrivalled performance, reliability, and safety. Plus, an advanced control ...
-
based in USA
Unlike most gas turbines, the LM6000 is primarily controlled by the compressor discharge temperature in lieu of the turbine inlet temperature. Some of the compressor discharge air is then used to cool high-pressure turbine components. Sprint — which stands for 'Spray Inter-cooled Turbine' — reduces compressor discharge temperature, thereby allowing advancement of the throttle to ...
-
Manufactured by Terra Calidus GmbHbased in GERMANY
Stable PE chamber, green color inspection friendly. Standard design: CLASSIC (cover load up to 200kg), PRO (cover strength up to 600kg wheel load). Different PE covers (black color) available. Connecting tubes min. Ø 32 (feed, return flow) to weld the geothermal probes using electro-welding fittings. Heat pump connection min. Ø 32 to weld the tubes using electro-welding fittings. ...
-
Manufactured by Leobersdorfer Maschinenfabrik GmbHbased in AUSTRIA
LMF supplies high-pressure compressor systems with nearly 40 years of experience, used as energy sources for the operation of the airguns. These systems are developed and built according to the special requirements of seismic offshore ...
-
Manufactured by Dürr Technik GmbH & Co. KGbased in GERMANY
Even small, compact compressors generate high pressures. Small compressors from Dürr Technik are as standard 100% continuous running, very quiet, and universally applicable due to protection class IP54. The A-025 type is able to cover diverse voltages and frequencies with its flexible dual voltage motor. Product update, spare part availability and storage are further convincing reasons for ...
-
Manufactured by Biogasmetano S.r.l.based in ITALY
BGM-BIOGASMETANO Drying Unit Systems are made to solve the main problem of Biogas from Anaerobic Digestion and Landfill normally saturated with water with significant negative impact on the performance of energy recovery ...
-
based in SWITZERLAND
In TVR systems, part of the vapour generated in the evaporator is combined with high-pressure steam in the Thermal Compressor (“booster”). The resulting vapour stream is the evaporator heating medium. TVR can be combined with MEE, to increase the operation’s energy efficiency. Theoretically, a TVR single effect unit has, approximately, the energy efficiency of a double ...
-
Manufactured by Acar Kardesler Drillingbased in TURKEY
Deck Engine : 460 HP, Double Diesel Engine. Mast : 110 tons Load Capacity, 4.5" - 8 mm Pipe Diameter, 15 m Length From Chassis. Drawworks Hook Load Capacity : 90 tons. Drilling Depth (4.5" Pipe) : 1200 m. Rotary zTable Ground Clearance : 350 cm. Rope Diameter : 24 mm (6x36). Alternator : 125 kVA. Substructure : ...
-
Manufactured by Wartsila Corporationbased in FINLAND
Our compressors can be configured to suit a diverse range of high pressure applications for both air and other compressible gases.We offer a range of options, from a basic compressor block to a fully integrated compressor package solution for high pressure air or gas. We are also able to incorporate ancillary items, such as nitrogen generation and air/gas driers, into the scope of supply. The ...
-
Manufactured by HAUG Sauer Kompressoren AGbased in SWITZERLAND
The HAUG.Mercure series is used for gas recovery and booster compression of gases such as helium, SF6, oxygen, nitrogen and Natural gas, as well as for booster compression of compressed air. HAUG.Mercure compressors have the electric motor in the gas compartment. Power is supplied to the electric motor through a gas-tight connection in the crankcase. This construction, developed by HAUG Sauer, ...
-
Manufactured by Nuova Contec s.r.l.based in ITALY
Turbine nozzles with interchangeable milling head in steel (TA), carbide (TW) or, just for 1/Z and 3/A' nozzles, chain supporting head (TC). TC nozzles include chain set for DN 50/75/100 pipes (1/2' nozzle) and DN 100/125/150 pipes (3/4' nozzle). Centralizer rings are also available so that the nozzle keeps a central position in the pipe and can easily advance through elbows. Turbine nozzles can ...
-
Manufactured by STDS-Jantz GmbHbased in GERMANY
Using our geothermal drilling tools and rotary heads enable customers to react swiftly at all times to ever-changing requirements, and at minimum cost. The advantages offered ...
-
Manufactured by Gerodur MPM Kunststoffverarbeitung GmbH & Co. KGbased in GERMANY
The GEROtherm is a geothermal pipe system based on polyethylene (PE) that fulfills the wishes of the heat absorption, resp. its optimal releasing. Due to the complexity of geothermal plants as well as influencing the effectiveness of all installed components, all intalled system components have been matched in terms of fluid dynamics and thermodynamics each ...
-
Manufactured by geoKOAX GmbHbased in GERMANY
geoKOAX is a large volume coaxial probe with high annual performance figures The geothermal heat storage of geoKOAX, higher flow temperature to the heat pump and decoupling of the operation of the heat pump lead to high annual performance ...
-
Manufactured by PA Hilton Ltdbased in UNITED KINGDOM
A heat pump is a machine whose prime function is to absorb heat from a low grade source, and to deliver heat at a useful temperature, e.g. suitable for space heating or domestic hot ...
-
Manufactured by STDS-Jantz GmbHbased in GERMANY
Using our geothermal drilling tools and rotary heads enable customers to react swiftly at all times to ever-changing requirements, and at minimum cost. The advantages offered include: Swift mobilisation, efficient and time-saving working procedures, lower costs and increased competitiveness, safe working and minimal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you