Geothermal Drilling Equipment For Geothermal In USA
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn® 20, Centaur® 40, Centaur 50, Taurus™ 60, Taurus 70, Mars® 90,Mars 100 andTitan™ 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high ...
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
Manufactured by Haskelbased in USA
H-Drive from Haskel is a technological evolution in the gas compression market. Designed by our team of knowledgeable experts, H-Drive Booster is configurable to a wide range of critical high pressure applications in a variety of diverse fields and hydraulic systems. It has been engineered to safely and reliably handle flows required for critical, high-pressure gas compression and transfer needs, ...
-
Manufactured by Sauer Compressors USA, Inc.based in USA
High-pressure compressors showcase our engineering superiority and production expertise. Founded on our renowned military design experience and through continuous innovation, Sauer Compressors has developed the most cost effective and reliable industrial compressors in the market. ...
-
Manufactured by EnergySmart Alternatives, LLCbased in USA
Most geothermal installations in Massachusetts are vertical closed loop systems that involve drilling. We only work with drilling companies who have experience in geothermal installations in Massachusetts. In fact, our drillers have installed literally thousands of geothermal, drinking water, and irrigation wells throughout the state. An experienced driller will have knowledge of the bedrock and ...
-
Manufactured by Hydro-Pac Inc.based in USA
The LX-SERIES™ Gas Compressor is the most popular compressor for hydrogen gas applications. This model has been installed world wide in fixed and mobile fueling stations, industrial and manufacturing sites, research and development facilities and off-shore applications. Standard models are rated for discharge pressures of 1,500 to 12,000 psig with frame sizes from 3 to 60HP. These ...
-
Manufactured by Hydro-Pac Inc.based in USA
The FLEXI-POWER™ High-Pressure Gas Compressor is used for high pressure testing, alternative refueling, high flowrate research applications and heavy duty industrial applications. Standard units are available for discharge pressures of 10,000 to 60,000 psig (70 to 415 MPa) in frame sizes from 10 to 100 hp (7.5 to 75 kW). Two-stage FX compressors typically operate with inlet pressure ranges ...
-
Manufactured by SIMCO Drilling Equipment, Inc.based in USA
The SIMCO 2800 has been a powerful tool for over 30 years. When big rig power in a compact package is needed to get the job done, the 2800 has always been one of the most reliable ...
-
Manufactured by Cobey Incbased in USA
Due to the effects of compression to the dew point of gas, a CNG station operator must adequately dehydrate their gas supply. Dry gas is critical to the compressor, ASME storage tanks, and the end user’s vehicles. Dry gas assures proper system operation and reduces the formation of harmful corrosive products such as carbon dioxide, and hydrogen sulfide. Single and dual tower models ...
-
Distributed by Dive Commercial Internationalbased in USA
Set up for a wide variety of applications in both breathing air and industrial air use. Compact design and fold away handles make for easy lifting and portability. The Nuvair Mini Tech Air Compressor uses a pumping unit that is made from top quality materials; connecting rods from aluminum alloy, stainless steel intercoolers and aftercoolers that are more than four meters in length, and ...
-
Manufactured by Haskelbased in USA
The future-focused innovation you need, combined with the reliability, expertise, and support you expect. Revolutionizing gas compression with smart, sustainable technology, Q-Drive is an electric servo actuated Compressed Gas System with unprecedented 4.0 intelligence, efficiency, precise control and accuracy. It delivers unrivalled performance, reliability, and safety. Plus, an advanced control ...
-
based in USA
Unlike most gas turbines, the LM6000 is primarily controlled by the compressor discharge temperature in lieu of the turbine inlet temperature. Some of the compressor discharge air is then used to cool high-pressure turbine components. Sprint — which stands for 'Spray Inter-cooled Turbine' — reduces compressor discharge temperature, thereby allowing advancement of the throttle to ...
-
Manufactured by Mills Machine Companybased in USA
Mills Machine GEOCLAW® Bits were designed specifically for the geothermal drilling industry. Its construction is more versatile and its performance is superior to other smaller bullet bits previously ...
-
Manufactured by Hydro-Pac Inc.based in USA
The Li’l CRITTER™ High-Pressure Gas Compressor is used for low capacity production and research applications that require a small flowrate at high pressure. Standard units are available for discharge pressures of 10,000 to 60,000 psig (70 to 415 MPa) in frame sizes of 3, 5 and 7.5 hp (2.3, 3.8 and 5.6 kW). Two-stage Li’l Critter™ compressors typically operate with inlet ...
-
Manufactured by Nuvairbased in USA
Weighing in at under 90 lb (41 kg), the Coltri/Nuvair MCH3 is easy to transport with its convenient lifting handles. No special wiring required! The MCH3 plugs right into a standard U.S. wall socket. It is commonly used to fill airgun tanks and single scuba cylinders at home, on boats or on dive trips. Fill hose and air filtration system are included. Mounted on a durable powder coated steel ...
-
Manufactured by Ingersoll Randbased in USA
Ingersoll Rand multi-stage high-pressure air compressors are designed for high-pressure applications. These compressors have extra heavy-duty components and are designed for minimum maintenance and maximum performance. High-pressure air compressors are widely used in power generation plant, PET blow molding industry, military, diving and component testing. ...
-
Manufactured by PDC Machines Inc.based in USA
PDC Machines is the World’s Leading Hydrogen Gas Compressors Manufacturer for Hydrogen Refueling Stations. PDC specializes in providing complete solutions for alternative energy applications. We are the #1 supplier of gas compressors for automobiles, bus and material handling fueling market with nearly 350 compressor installations worldwide and counting. With decades of experience in ...
-
based in USA
GenaSysTM technology accesses geologic formations – known as hot sedimentary basins – to harvest their geothermal energy. This resource is…Unlimited, Eternally renewable, Non-carbon emitting, Low-cost, ScaleableTiming is everything. As little as 10 years ago, the technologies needed to economically harvest geothermal power were simply not mature enough. But these technologies ...
-
Manufactured by TT Technologies, Incbased in USA
The rugged Grundowinch line of hydrostatic constant-tension winches are specially designed for the variable conditions in below-grade work. All models feature protective cable storage and are available with an air-cooled diesel or gas engine; as well as an adjustable boom system. Portable and powerful, Grundowinch is well-suited for underground utility construction applications ...
-
Manufactured by TRIC Tools, Inc.based in USA
The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you