Geothermal Energy Equipment For Geothermal In USA
-
Manufactured by Total Green Manufacturing (Mfg.)based in USA
Standard Features: Refrigerant Based (Water-Free) Geothermal Heat Pump System, Two-Stage Forced Air DX Heating and Cooling, Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Smart Logic Controller, Zoning Friendly Capabilities, Dual Fuel Friendly Controller, Enhanced Compressor Protection, 2 Stage Controller, Standardized Mechanical Refrigerant Controls, High-Efficiency Copeland ...
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
Manufactured by GeoCool Heat Pump Systemsbased in USA
A top of the line product like the GeoCool GCHPV036 Geothermal Heat Pump Vertical Package Unit is an excellent example of the performance ground-source technology can routinely deliver. This unit is rated for up to 28.7 EER, an efficiency standard virtually no central air conditioner or heat pump can hope to match. To put geothermal performance in perspective, 28.7 EER is roughly equivalent to ...
-
Manufactured by Tricor Metals Incbased in USA
Special Applications/Features; Mechanical (roller) expanded tube-to-tubesheet joints. Hydro-expanded tube-to-tubesheet joints. Seal-welded tube-to-tube sheet joints. Strength-welded tube-to-tube sheet joints. Thermal oxide coating designs for added erosion & corrosion resistance. Extended surface tubing available. Flush mount tube to tube sheet for full drain-ability. Polishing requirements ...
-
Manufactured by Pfister Energybased in USA
Geothermal heat pumps are among the most efficient and comfortable heating and cooling technologies, but instead of using heat found in outside air, they rely on the stable, even heat of the earth to provide heating, air conditioning and hot water. The heat pump equipment works like a reversible refrigerator by removing heat from one location and depositing it in another location. Installing a ...
-
Manufactured by Geo-Flo Corporationbased in USA
Geo-Flo manufactures pump modules for commercial, industrial, and institutional water source heat pump and/or ground source (geothermal) heat pump applications. These PM Series modules provide engineers and contractors a variety of options for pump performance, system connection sizes and types, and building supply voltages. Our PM modules are factory assembled, wired, and leak tested saving ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
-
Manufactured by Didion Separatorbased in USA
The type DST Model is our most popular line. We design and manufacture these steam, air, or gas moisture (water) separators in the USA, and they are for a horizontal flow configuration. In Addition, they have the same guaranteed separator efficiency as all of our standard models: 99% removal of all entrainment 10 microns and ...
-
based in USA
Water-to-air unit: These models employ a forced-air distribution system to provide both heating and cooling through a conventional ductwork system. These units are ideal for both new and retrofit construction. ...
-
Manufactured by SIMCO Drilling Equipment, Inc.based in USA
The SIMCO 2800 has been a powerful tool for over 30 years. When big rig power in a compact package is needed to get the job done, the 2800 has always been one of the most reliable ...
-
Manufactured by Drill Pipe Incbased in USA
DPI offers both Ribbed, and Smooth Stabilizers. The Product Range includes your choice of Integral or Welded Construction. Integral Stabilizers are manufactured with 4140 Q&T or 4145 Q&T Bar, trepanned to the specified ID. Welded Stabilizers are manufactured with A106B Seamless Carbon Tubes, and 4140 Quenched & Tempered Tool Joints. Stabilizers are offered with or without Fishing ...
-
Manufactured by Mills Machine Companybased in USA
Mills Machine GEOCLAW® Bits were designed specifically for the geothermal drilling industry. Its construction is more versatile and its performance is superior to other smaller bullet bits previously ...
-
Manufactured by WL Plasticsbased in USA
Charter PE 4710 Black Geothermal pipe is made from rugged PE 4710 resin. It provides outstanding physical performance and is listed with NSF International as complying with NSF 358. The recommended way to join geothermal pipe is with fusion. For lateral connections, stab or mechanical fittings designed for ASTM D3035 or F 714 pipe may be ...
-
Manufactured by Enertech Global, LLCbased in USA
Revolution Series Combination models are among the most versatile geothermal heat pumps available. They can provide forced air heating, forced air cooling, domestic hot water, plus hot water for radiant floor heating, all in a single ...
-
Manufactured by EnergySmart Alternatives, LLCbased in USA
Most geothermal installations in Massachusetts are vertical closed loop systems that involve drilling. We only work with drilling companies who have experience in geothermal installations in Massachusetts. In fact, our drillers have installed literally thousands of geothermal, drinking water, and irrigation wells throughout the state. An experienced driller will have knowledge of the bedrock and ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
For those geothermal resources with a temperature generally above 190ºC, a single-flash type of plant is often the best economic choice. Higher temperature reservoirs will typically produce both water and steam under natural pressure. This two-phase flow is usually directed to a separator that allows the steam fraction to be piped to the plant and the water fraction to be piped back into the ...
-
based in USA
Our water-to-air split units are designed to be used with new or existing oil or gas forced air furnace systems. This is a complete package for both heating and air conditioning. It also has built-in utility load control functionality making it a perfect fit for a home that has a propane or oil furnace system and has a power company that offers an off-peak or "dual fuel" reduced electric rate ...
-
based in USA
Many technologies have been developed to take advantage of geothermal energy—the heat from the earth. There has been a major emphasis on creating more alternative sources of energy. Geothermal systems are one of the most efficient systems available for heating and cooling. Geothermal power is cost effective, reliable, sustainable, and environmentally friendly. ...
-
Manufactured by EnergySmart Alternatives, LLCbased in USA
EnergySmart is a geothermal heat pump dealer for Water Furnace and Hydron Module brands. Having options means that we can choose the best and most appropriate geothermal heat pump technology and accessories for your specific ...
-
Distributed by 101 Pipe and Casing, Incbased in USA
Along with our outer column, we offer a complete line of oil-lubricated tube and shaft assemblies, and water-lubricated open line shaft assemblies. We manufacture our inner column to all major pump company specifications. Individual components such as shafts & shaft couplings, bronze & graphite bearings, tubes, sleeves and water lube spiders are sold separately. 101 also specializes in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you