Geothermal Energy Equipment For Geothermal
-
Manufactured by Total Green Manufacturing (Mfg.)based in USA
Standard Features: Refrigerant Based (Water-Free) Geothermal Heat Pump System, Two-Stage Forced Air DX Heating and Cooling, Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Smart Logic Controller, Zoning Friendly Capabilities, Dual Fuel Friendly Controller, Enhanced Compressor Protection, 2 Stage Controller, Standardized Mechanical Refrigerant Controls, High-Efficiency Copeland ...
-
Manufactured by Ak-Kim Kimyabased in TURKEY
Used to prevent calcification in geothermal water lines that contain high levels of inorganic ...
-
Manufactured by GeoSmart Energybased in CANADA
GeoSmart Energy’s PremiumGX forced air geothermal heat pump systems are ideal for temperature control in larger areas. With R-410 refrigerant, microprocessor-based controls, and heavy duty cabinets these units are built to last. They feature advanced technology and innovative components setting a new standard for large zone heating and cooling efficiency while providing you with exceptional ...
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
Manufactured by CQM Group Ltdbased in ISRAEL
Clean tubes improve efficiency, heat exchange and thermodynamic processes. ATCS actually takes care of condenser cleaning while keeping the condensers at power stations and refineries clean of fouling. With perfectly clean tubes vacuum and therefore process quality are ...
-
Manufactured by GeoCool Heat Pump Systemsbased in USA
A top of the line product like the GeoCool GCHPV036 Geothermal Heat Pump Vertical Package Unit is an excellent example of the performance ground-source technology can routinely deliver. This unit is rated for up to 28.7 EER, an efficiency standard virtually no central air conditioner or heat pump can hope to match. To put geothermal performance in perspective, 28.7 EER is roughly equivalent to ...
-
Manufactured by B:POWER, a. sbased in CZECH REPUBLIC
ORC POWER+ features patent-protected rotating twin screw expander. The rotary expander produces electricity transformed from a source of low-temperature waste heat. Installing the POWER+ offers a potential alternative to utilization of waste heat and a very attractive payback ...
-
Manufactured by Upet SAbased in ROMANIA
The mobile rigs are intended for repair vertical and inclined wells for oil, gas, geothermal, salt extraction. The presented technical data are basic specifications that can be adapted to clients’ individual ...
-
Manufactured by Tricor Metals Incbased in USA
Special Applications/Features; Mechanical (roller) expanded tube-to-tubesheet joints. Hydro-expanded tube-to-tubesheet joints. Seal-welded tube-to-tube sheet joints. Strength-welded tube-to-tube sheet joints. Thermal oxide coating designs for added erosion & corrosion resistance. Extended surface tubing available. Flush mount tube to tube sheet for full drain-ability. Polishing requirements ...
-
Manufactured by Pfister Energybased in USA
Geothermal heat pumps are among the most efficient and comfortable heating and cooling technologies, but instead of using heat found in outside air, they rely on the stable, even heat of the earth to provide heating, air conditioning and hot water. The heat pump equipment works like a reversible refrigerator by removing heat from one location and depositing it in another location. Installing a ...
-
Manufactured by Geo-Flo Corporationbased in USA
Geo-Flo manufactures pump modules for commercial, industrial, and institutional water source heat pump and/or ground source (geothermal) heat pump applications. These PM Series modules provide engineers and contractors a variety of options for pump performance, system connection sizes and types, and building supply voltages. Our PM modules are factory assembled, wired, and leak tested saving ...
-
Manufactured by Maritime Geothermal Ltdbased in CANADA
Our high-temperature heat pump (WH Series) is a liquid-to-water heat pump with a twist. The WH heat pump can use as its source either a typical ground loop (provided the entering water temperature does not fall below 50°F (10°C) or any clean incoming liquid that has been pre-heated to between 50°F (10°C) and 122°F (50°C). Some alternative heat sources include a buffer tank ...
-
Manufactured by STDS-Jantz GmbHbased in GERMANY
Using our geothermal drilling tools and rotary heads enable customers to react swiftly at all times to ever-changing requirements, and at minimum cost. The advantages offered ...
-
Manufactured by Gerodur MPM Kunststoffverarbeitung GmbH & Co. KGbased in GERMANY
The GEROtherm is a geothermal pipe system based on polyethylene (PE) that fulfills the wishes of the heat absorption, resp. its optimal releasing. Due to the complexity of geothermal plants as well as influencing the effectiveness of all installed components, all intalled system components have been matched in terms of fluid dynamics and thermodynamics each ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
-
Manufactured by Isoenergy | ISO Energy Ltd.based in UNITED KINGDOM
The ground source heat pumps isoenergy installs are the most efficient, reliable, correctly sized and scoped to the latest MCS MIS Standard, to provide the highest possible return on investment.Ground source heat pumps take heat from the ground, raise its temperature and use the energy to heat your property. Ground source heat pumps operate on the same refrigeration cycle principles as a domestic ...
-
Manufactured by Didion Separatorbased in USA
The type DST Model is our most popular line. We design and manufacture these steam, air, or gas moisture (water) separators in the USA, and they are for a horizontal flow configuration. In Addition, they have the same guaranteed separator efficiency as all of our standard models: 99% removal of all entrainment 10 microns and ...
-
based in USA
Water-to-air unit: These models employ a forced-air distribution system to provide both heating and cooling through a conventional ductwork system. These units are ideal for both new and retrofit construction. ...
-
Manufactured by SIMCO Drilling Equipment, Inc.based in USA
The SIMCO 2800 has been a powerful tool for over 30 years. When big rig power in a compact package is needed to get the job done, the 2800 has always been one of the most reliable ...
-
Manufactured by GA Drilling, a. s.based in SLOVAKIA
How PLASMABIT® drilling platform disrupts the geothermal sector? Current geothermal drilling challenges are prohibitive drilling costs, inefficiency of drilling operation at greater depths and geothermal energy availability at 3% of Earth´s surface only. Intelligent drilling platform PLASMABIT® overcomes these limits with unprecedented reliability. With our unique technology any ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you