Geothermal Energy Equipment For Geothermal
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
Manufactured by Tricor Metals Incbased in USA
Special Applications/Features; Mechanical (roller) expanded tube-to-tubesheet joints. Hydro-expanded tube-to-tubesheet joints. Seal-welded tube-to-tube sheet joints. Strength-welded tube-to-tube sheet joints. Thermal oxide coating designs for added erosion & corrosion resistance. Extended surface tubing available. Flush mount tube to tube sheet for full drain-ability. Polishing requirements ...
-
Manufactured by Pfister Energybased in USA
Geothermal heat pumps are among the most efficient and comfortable heating and cooling technologies, but instead of using heat found in outside air, they rely on the stable, even heat of the earth to provide heating, air conditioning and hot water. The heat pump equipment works like a reversible refrigerator by removing heat from one location and depositing it in another location. Installing a ...
-
Manufactured by Ak-Kim Kimyabased in TURKEY
Used to prevent calcification in geothermal water lines that contain high levels of inorganic ...
-
Manufactured by Maritime Geothermal Ltdbased in CANADA
Our high-temperature heat pump (WH Series) is a liquid-to-water heat pump with a twist. The WH heat pump can use as its source either a typical ground loop (provided the entering water temperature does not fall below 50°F (10°C) or any clean incoming liquid that has been pre-heated to between 50°F (10°C) and 122°F (50°C). Some alternative heat sources include a buffer tank ...
-
Manufactured by GeoSmart Energybased in CANADA
GeoSmart Energy’s PremiumGX forced air geothermal heat pump systems are ideal for temperature control in larger areas. With R-410 refrigerant, microprocessor-based controls, and heavy duty cabinets these units are built to last. They feature advanced technology and innovative components setting a new standard for large zone heating and cooling efficiency while providing you with exceptional ...
-
Manufactured by Upet SAbased in ROMANIA
The mobile rigs are intended for repair vertical and inclined wells for oil, gas, geothermal, salt extraction. The presented technical data are basic specifications that can be adapted to clients’ individual ...
-
Manufactured by Daigon Renewables Ltd.based in IRELAND
High Quality Geothermal Manifolds Manufactured with PPR fittings and pipe making them robust and long lasting with easy installation. All products are made to order and can range from 2” through to 6” manifolds and valves contact us with your needs; 6 port Geothermal Manifold with isolation valves and auto air vent; 8 port Geothermal Manifold with isolation valves and auto air vent; ...
-
Manufactured by Dantonit A/Sbased in DENMARK
DantoCon Thermal C2H is used for environmental sealing and thermal optimisation of geothermal energy wells. The product is delivered as a ready to mix dry powder and needs only to be mixed with freshwater before use. Mixed with water, DantoCon Thermal C2H yields a sealing mixture, which combines high thermal conductivity with the ability to withstand environmental inflictions over ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
-
Manufactured by EnergySmart Alternatives, LLCbased in USA
Most geothermal installations in Massachusetts are vertical closed loop systems that involve drilling. We only work with drilling companies who have experience in geothermal installations in Massachusetts. In fact, our drillers have installed literally thousands of geothermal, drinking water, and irrigation wells throughout the state. An experienced driller will have knowledge of the bedrock and ...
-
based in CANADA
Generating electricity and cooling from low potential waste heat is the biggest sleeping giant of the worldwide energy market and will significantly transform the energy system globally. ...
-
Manufactured by Didion Separatorbased in USA
The type DST Model is our most popular line. We design and manufacture these steam, air, or gas moisture (water) separators in the USA, and they are for a horizontal flow configuration. In Addition, they have the same guaranteed separator efficiency as all of our standard models: 99% removal of all entrainment 10 microns and ...
-
based in ICELAND
Despite being located in the North Atlantic and wind being a constant in the country, there has been only limited development of wind power project. A pilot project by the national power company Landsvirkjun set up two wind turbines with a combined capacity of 2 MW as an R&D project in 2013. With average capacity factor that is exceeding offshore numbers for wind parks elsewhere, it proves ...
-
Manufactured by STDS-Jantz GmbHbased in GERMANY
Using our geothermal drilling tools and rotary heads enable customers to react swiftly at all times to ever-changing requirements, and at minimum cost. The advantages offered ...
-
Manufactured by Gerodur MPM Kunststoffverarbeitung GmbH & Co. KGbased in GERMANY
The GEROtherm is a geothermal pipe system based on polyethylene (PE) that fulfills the wishes of the heat absorption, resp. its optimal releasing. Due to the complexity of geothermal plants as well as influencing the effectiveness of all installed components, all intalled system components have been matched in terms of fluid dynamics and thermodynamics each ...
-
Manufactured by Geo-Flo Corporationbased in USA
Geo-Flo manufactures pump modules for commercial, industrial, and institutional water source heat pump and/or ground source (geothermal) heat pump applications. These PM Series modules provide engineers and contractors a variety of options for pump performance, system connection sizes and types, and building supply voltages. Our PM modules are factory assembled, wired, and leak tested saving ...
-
Manufactured by GeoCool Heat Pump Systemsbased in USA
A top of the line product like the GeoCool GCHPV036 Geothermal Heat Pump Vertical Package Unit is an excellent example of the performance ground-source technology can routinely deliver. This unit is rated for up to 28.7 EER, an efficiency standard virtually no central air conditioner or heat pump can hope to match. To put geothermal performance in perspective, 28.7 EER is roughly equivalent to ...
-
Manufactured by geoKOAX GmbHbased in GERMANY
geoKOAX is a large volume coaxial probe with high annual performance figures The geothermal heat storage of geoKOAX, higher flow temperature to the heat pump and decoupling of the operation of the heat pump lead to high annual performance ...
-
Manufactured by Zantingh B.V.based in NETHERLANDS
In many sectors plate heat exchangers are used to separate heat circuits, for example, in industry, non-residential construction and the geothermal sector. (Plate heat exchangers are also referred to as isolating heat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you