Geothermal Plants Equipment For Geothermal Available In Connecticut
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
Manufactured by Exergy International Srlbased in ITALY
Exergy designs and supplies Organic Rankine cycle binary plants for geothermal resources. The first and only radial outflow turbine working with an organic fluid gives outstanding performance and flexibility. The availability of products using flammable or non-flammable working fluids and synchronous or induction generator assures the best performance of Exergy ORC modules. These are available ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
For those geothermal resources with a temperature generally above 190ºC, a single-flash type of plant is often the best economic choice. Higher temperature reservoirs will typically produce both water and steam under natural pressure. This two-phase flow is usually directed to a separator that allows the steam fraction to be piped to the plant and the water fraction to be piped back into the ...
-
Manufactured by Chola Turbo Machinery International Pvt Ltd (CTMI)based in INDIA
Geothermal Steam Turbines operate typically with saturated steam, which is provided from a geothermal source. Their unique features and materials of construction lead to long-term, reliable operation in geothermal service. CTMI offers revolutionary portable Geothermal units up to 25 MW which offers flexibility in transportation and redeployment on the second well in case of failure of the ...
-
Manufactured by Envitech, Inc.based in USA
The Envitech quencher is a proprietary design that uses makeup water and a low-pressure-drop Venturi to cool hot gases by evaporating water into the gas. The Venturi provides turbulence to atomize the makeup water and saturate the gas while also collecting large particulate and absorbing acid gases. High turbulence provides an effective means to saturate the gas over a broad turn-down ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
This type of machine is made by a HP/IP combined cylinder plus a double flow LP turbine (HIC-DL). The same concept is applied with two LP turbines when larger exhaust areas are needed. State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined cycles are the usual field of application, also in ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
A condensing plant makes better use of the resource than a non-condensing plant. In this model, steam is expanded through the turbine down to a very low pressure. Hence, much more power can be generated from the same steam flow when compared with non-condensing plants. After leaving the turbine the steam encounters cooling water sprays in a direct contact condenser. The heat gained by the cooling ...
-
Manufactured by AKRONEX International - Worldwide Fire Fighting Solutionsbased in TURKEY
Automatic Clean Agent Fire Extinguishing Systems control the danger that can occur due to fire and protect all the equipment in the protected area without any damage. All products are designed and certified according to national and international ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Along with its 150 years of experience in the electrical and mechanical engineering business together with its in-house capability for all major components, such as generators, steam and gas turbines, Ansaldo Energia offers multiple choices: from the turboset package, which can be supplied as a standalone equipment or by integrating the thermal cycle to provide the entire power island, to the ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
-
Manufactured by Didion Separatorbased in USA
The type DST Model is our most popular line. We design and manufacture these steam, air, or gas moisture (water) separators in the USA, and they are for a horizontal flow configuration. In Addition, they have the same guaranteed separator efficiency as all of our standard models: 99% removal of all entrainment 10 microns and ...
-
Manufactured by Gerodur MPM Kunststoffverarbeitung GmbH & Co. KGbased in GERMANY
The GEROtherm is a geothermal pipe system based on polyethylene (PE) that fulfills the wishes of the heat absorption, resp. its optimal releasing. Due to the complexity of geothermal plants as well as influencing the effectiveness of all installed components, all intalled system components have been matched in terms of fluid dynamics and thermodynamics each ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction ...
-
Manufactured by Enertech Global, LLCbased in USA
The Hydron Module Compact Vertical Packaged Series is built upon our heritage of superb craftsmanship with the highest quality materials and unmatched attention to detail. The Compact Vertical Packaged Series model combines many of the innovative features found in the Hydron Module product line with a smaller cabinet that is perfect for installations where space is ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. Machine of this configuration may be realized with or ...
-
Manufactured by KELVION INC. / PHEbased in USA
Air fin coolers are ideally suited to processes that require the transfer of large quantities of heat. They are the products of choice for most of the major industries that keep the modern world functioning as air is cost-effective, non-corrosive and has unlimited availability. Kelvion has been at the forefront of air fin heat exchange technology for more than 90 years. Today, our air fin coolers ...
-
based in ICELAND
Above is the cluster map of the geothermal energy sector in Iceland which was issued by Michael Porter, a professor at the Harvard Business School 2016. It shows all the detailed and important links of the geothermal energy value ...
-
Manufactured by AKRONEX International - Worldwide Fire Fighting Solutionsbased in TURKEY
Carbon dioxide is a colorless, scentless and non conductive gas that can effect quickly and efficiently into the protected area. Its density is about 50% higher than . the air density.During extinguishing, it is seen as a white mist. It does not make residue on the materials or affect adversely the materials. Reduces the concentration of oxygen causes suppression to fire in the space and creates ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, same flow direction for the entire bladed path. Full arch admission with reaction blades as well as control stage version are available. Very simple mechanical scheme to meet the highest performance and reliability standards of a wide and diversified market, from industrial applications to geothermal needs. High speed and direct coupling ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
Resource conditions and project economics may allow a plant configuration that combines single-flash and binary technologies. In this arrangement, two-phase flow from the resource is directed to a separator in the same manner assingle-flash, but rather than injecting the separated brine, the brine is directed to binary equipment. There may also be other combined cycle arrangements, such as using ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you