Geothermal Plants Equipment For Geothermal In USA
-
based in USA
The direct application of the DeepPower Platform is considered to be an Enhanced Geothermal System (EGS). EGS is a next generation geothermal technique and does not require natural hot water reservoirs for the development of geothermal power plants. In EGS, the developer basically creates its own reservoir by drilling down into solid hot rock, injecting water at a high pressure through one well, ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
Resource conditions may allow consideration of a dual-flash plant. Substantially similar to a single-flash plant, a dual-flash plant is capable of utilizing more of the total flow from the reservoir than a single-flash plant. This increase in resource utilization comes with a corresponding increase in plant complexity and ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat plant configurations are designed to take maximum advantage of the available geothermal energy resources at each site, and provide various binary plants implementations ...
-
Manufactured by KELVION INC. / PHEbased in USA
Air fin coolers are ideally suited to processes that require the transfer of large quantities of heat. They are the products of choice for most of the major industries that keep the modern world functioning as air is cost-effective, non-corrosive and has unlimited availability. Kelvion has been at the forefront of air fin heat exchange technology for more than 90 years. Today, our air fin coolers ...
-
Manufactured by Enertech Global, LLCbased in USA
The Hydron Module Compact Vertical Packaged Series is built upon our heritage of superb craftsmanship with the highest quality materials and unmatched attention to detail. The Compact Vertical Packaged Series model combines many of the innovative features found in the Hydron Module product line with a smaller cabinet that is perfect for installations where space is ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
Resource conditions and project economics may allow a plant configuration that combines single-flash and binary technologies. In this arrangement, two-phase flow from the resource is directed to a separator in the same manner assingle-flash, but rather than injecting the separated brine, the brine is directed to binary equipment. There may also be other combined cycle arrangements, such as using ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
This process model is similar to the model above but uses a two-phase geothermal resource instead of pumped brine. In this model, the two phase flow is separated with the steam directed to the vaporizer and the separated bring to the preheater. The steam condensate from the vaporizer is also pumped to the preheater. The spent brine is then directed to a reinjection system. The secondary working ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
This is a great starter plant due to low initial cost and the high potential for modular construction. A modular plant is much more portable, allowing for early wellhead power generation while the balance of the wellfield is developed for a large project. In this type of plant, steam is expanded through the turbine and then released to atmosphere without being ...
-
based in USA
We are developing a suite of breakthrough drilling technologies, based on existing oil & gas drilling techniques, to boldly go where no oil rig has gone before. Unlike new and unproven geothermal drilling technologies such as plasma or lasers, our drilling technologies will be based on the tried and true mechanical rotary drill. However, our drill, wellbore and casing technology will be ...
-
Manufactured by Didion Separatorbased in USA
In its simplest form, a 2-phase geothermal plant brings hot high energy brine to the surface. The brine flashes into steam at the lower pressure as a result. In short, the steam then flows to power a turbine, which makes ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat Geothermal Combined Cycle Units (GCCU) are designed to generate power from high-pressure geothermal steam resources. When there are non-condensable gases present in the geothermal steam, our GCCU technology provides higher efficiency, lower maintenance costs and higher electrical output in comparison to conventional condensing steam power plants. Ormat offers GCCU modules in a wide range of ...
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
-
Manufactured by Didion Separatorbased in USA
The type DST Model is our most popular line. We design and manufacture these steam, air, or gas moisture (water) separators in the USA, and they are for a horizontal flow configuration. In Addition, they have the same guaranteed separator efficiency as all of our standard models: 99% removal of all entrainment 10 microns and ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
For those geothermal resources with a temperature generally above 190ºC, a single-flash type of plant is often the best economic choice. Higher temperature reservoirs will typically produce both water and steam under natural pressure. This two-phase flow is usually directed to a separator that allows the steam fraction to be piped to the plant and the water fraction to be piped back into the ...
-
Manufactured by Envitech, Inc.based in USA
The Envitech quencher is a proprietary design that uses makeup water and a low-pressure-drop Venturi to cool hot gases by evaporating water into the gas. The Venturi provides turbulence to atomize the makeup water and saturate the gas while also collecting large particulate and absorbing acid gases. High turbulence provides an effective means to saturate the gas over a broad turn-down ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
A condensing plant makes better use of the resource than a non-condensing plant. In this model, steam is expanded through the turbine down to a very low pressure. Hence, much more power can be generated from the same steam flow when compared with non-condensing plants. After leaving the turbine the steam encounters cooling water sprays in a direct contact condenser. The heat gained by the cooling ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Along with its 150 years of experience in the electrical and mechanical engineering business together with its in-house capability for all major components, such as generators, steam and gas turbines, Ansaldo Energia offers multiple choices: from the turboset package, which can be supplied as a standalone equipment or by integrating the thermal cycle to provide the entire power island, to the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you