Geothermal Power Plants Equipment For Geothermal Available In Africa
-
based in USA
The direct application of the DeepPower Platform is considered to be an Enhanced Geothermal System (EGS). EGS is a next generation geothermal technique and does not require natural hot water reservoirs for the development of geothermal power plants. In EGS, the developer basically creates its own reservoir by drilling down into solid hot rock, injecting water at a high pressure through one well, ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Two cylinders, single LP cylinder. This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical although control stage versions can be supplied as well. This ...
-
based in ICELAND
Above is the cluster map of the geothermal energy sector in Iceland which was issued by Michael Porter, a professor at the Harvard Business School 2016. It shows all the detailed and important links of the geothermal energy value ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
Resource conditions may allow consideration of a dual-flash plant. Substantially similar to a single-flash plant, a dual-flash plant is capable of utilizing more of the total flow from the reservoir than a single-flash plant. This increase in resource utilization comes with a corresponding increase in plant complexity and ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat plant configurations are designed to take maximum advantage of the available geothermal energy resources at each site, and provide various binary plants implementations ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. Machine of this configuration may be realized with or ...
-
Manufactured by Dizayn Groupbased in TURKEY
These are pipes produced in order to prevent the heat transfer of the hot and cold fluid. As the pipe composes of different material layers it is in the composite filling class. Geothermal pipes are three layered. It is composed of carrier pipe inside, polyurethane layer(PUR) in the middle as isolation material and Polyethylene (PE) pipe on he external as preventive casing. The carrier pipe ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, same flow direction for the entire bladed path. Full arch admission with reaction blades as well as control stage version are available. Very simple mechanical scheme to meet the highest performance and reliability standards of a wide and diversified market, from industrial applications to geothermal needs. High speed and direct coupling ...
-
Manufactured by Lifeng Industry Group Co., Limitedbased in CHINA
Manufacturing Process: The aluminum fin strip is tension wound and placed into a groove cut into the ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
Resource conditions and project economics may allow a plant configuration that combines single-flash and binary technologies. In this arrangement, two-phase flow from the resource is directed to a separator in the same manner assingle-flash, but rather than injecting the separated brine, the brine is directed to binary equipment. There may also be other combined cycle arrangements, such as using ...
-
Manufactured by AKRONEX International - Worldwide Fire Fighting Solutionsbased in TURKEY
Carbon dioxide is a colorless, scentless and non conductive gas that can effect quickly and efficiently into the protected area. Its density is about 50% higher than . the air density.During extinguishing, it is seen as a white mist. It does not make residue on the materials or affect adversely the materials. Reduces the concentration of oxygen causes suppression to fire in the space and creates ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction ...
-
Manufactured by AKRONEX International - Worldwide Fire Fighting Solutionsbased in TURKEY
Automatic Clean Agent Fire Extinguishing Systems control the danger that can occur due to fire and protect all the equipment in the protected area without any damage. All products are designed and certified according to national and international ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
This type of machine is made by a HP/IP combined cylinder plus a double flow LP turbine (HIC-DL). The same concept is applied with two LP turbines when larger exhaust areas are needed. State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined cycles are the usual field of application, also in ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
A condensing plant makes better use of the resource than a non-condensing plant. In this model, steam is expanded through the turbine down to a very low pressure. Hence, much more power can be generated from the same steam flow when compared with non-condensing plants. After leaving the turbine the steam encounters cooling water sprays in a direct contact condenser. The heat gained by the cooling ...
-
Manufactured by Chola Turbo Machinery International Pvt Ltd (CTMI)based in INDIA
Geothermal Steam Turbines operate typically with saturated steam, which is provided from a geothermal source. Their unique features and materials of construction lead to long-term, reliable operation in geothermal service. CTMI offers revolutionary portable Geothermal units up to 25 MW which offers flexibility in transportation and redeployment on the second well in case of failure of the ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Along with its 150 years of experience in the electrical and mechanical engineering business together with its in-house capability for all major components, such as generators, steam and gas turbines, Ansaldo Energia offers multiple choices: from the turboset package, which can be supplied as a standalone equipment or by integrating the thermal cycle to provide the entire power island, to the ...
-
based in USA
GenaSysTM technology accesses geologic formations – known as hot sedimentary basins – to harvest their geothermal energy. This resource is…Unlimited, Eternally renewable, Non-carbon emitting, Low-cost, ScaleableTiming is everything. As little as 10 years ago, the technologies needed to economically harvest geothermal power were simply not mature enough. But these technologies ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
This process model is similar to the model above but uses a two-phase geothermal resource instead of pumped brine. In this model, the two phase flow is separated with the steam directed to the vaporizer and the separated bring to the preheater. The steam condensate from the vaporizer is also pumped to the preheater. The spent brine is then directed to a reinjection system. The secondary working ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you