Only show results available in Connecticut? Ok

Geothermal Steam equipment for Geothermal

  • Steam Turbines

    More than 2150 steam turbines with the total capacity of 250 GW have been produced altogether. The steam turbines made by LMZ are under operation in 45 countries of the world. The steam turbines made by KTZ are under operation in 43 countries of the world. The first steam turbine manufactured by LMZ was put into operation in 1907.

    By OJSC Power Machines based in Moscow, RUSSIA. from Power Generation Equipment Product line

  • Steam Turbine Components

    We supply parts for customers throughout Europe with a focus on meeting high quality requests with highest quality request. Our parts are primarily used in HYDRO power, THERMAL power, NUCLEAR power, STEAM turbine components, INSIDE / GEOTHERMAL power plants, CRITICAL applications and WIND and TIDAL power.

    By KRÁLOVOPOLSKÁ KOVÁRNA s.r.o. based in Královo Pole, CZECH REPUBLIC.

  • Thermax - Model TYPE I - Heat Pump

    Heat pumps drive heat from a lower temperature to medium temperature, using high grade energy. Thermax heat pumps utilise steam, hot water, exhaust, fuel, geothermal energy or any combination of these heat sources, to pump heat. Heat pumps save approximately 35% of heat energy. Thermax heat pumps are extensively used in Europe, Scandinavian ...

    By Thermax Limited based in Wakdewadi, INDIA. from Absorption Cooling Product line

  • CES - Reheaters

    The Clean Energy Systems reheater, developed with the support of the U.S. Department of Energy, dramatically improves the efficiency of combined steam and gas turbine power cycles by boosting the drive gas to turbine inlet temperatures typically associated with gas turbines and even beyond. The principles behind the reheater are essentially the ...

    By Clean Energy Systems, Inc. (CES) based in Rancho Cordova, CALIFORNIA (USA). from Reheaters Product line

  • Binary - Geothermal Power Plant

    Ormat plant configurations are designed to take maximum advantage of the available geothermal energy resources at each site, and provide various binary plants implementations for:

    By Ormat Technologies, Inc. based in Reno, NEVADA (USA). from Geothermal Power Product line

  • Model MV Series - Triple Eccentric Metal Seated Valves

    Metal to metal sealing. Triple eccentric quarter-turn design. Torque seated. Bi-directional tight shutoff. Zero leakage. Non-rubbing seating. Inherently fire safe and fire tested.

    By Orton s.r.l. based in Piacenza, ITALY.

  • Solar Thermal Power Plants

    Of the 2 primary methods used for harnessing the sun's energy, solar-thermal is more readily adapted to large-scale projects using Concentrated Solar Power or CSP.CSP involves concentrating the sun's rays and focusing the energy onto a central collector or receiver, water inside the receiver is then heated under pressure to temperatures up to ...

    By eco-Kinetics based in Stapylton, AUSTRALASIA.

  • Ideal - Low, Medium and High-Speed Synchronous and Induction Generator

    IDEAL has been a leading supplier of low, medium and high-speed synchronous and induction generators for over 115 years. With thousands of these generators in operation around the world, our machines have proven their reliability in virtually all types of applications and environments, including gas, steam, and geothermal.

    By Ideal Electric Company based in Mansfield, OHIO (USA).

  • Winterized - Air-Cooled Heat Exchangers

    Air-cooled heat exchangers in very cold climates and/or involving viscous or high pour-point fluids may require winterization for freeze protection and process temperature control. To prevent process fluids from freezing and to protect the exchanger, the exchanger is equipped with automatic louvers and recirculation chambers to mix warm exhaust ...

    By Hudson Products Corporation based in Beasley, TEXAS (USA). from Fin-Fan- Air-Cooled Heat Exchangers Product line

  • Induced Draft - Air-Cooled Heat Exchangers

    The induced draft configuration positions the fans above the exchanger bundle. High velocity hot air exhaust reduces the risk of hot air recirculation, and plenums protect the exchanger bundle from the elements. Induced draft exchangers are well suited for lower process temperatures and for applications  where hot air recirculation is a ...

    By Hudson Products Corporation based in Beasley, TEXAS (USA). from Fin-Fan- Air-Cooled Heat Exchangers Product line

  • Hudson - Large Fan Field Erected Units

    Our large fan field erected units are available in bay sizes up to 70 feet by 54 feet and fan diameters up to 36 feet.  Our modular design and construction expertise allows for fast and dependable field erection.  Benefits of the large fan design include:

    By Hudson Products Corporation based in Beasley, TEXAS (USA). from Fin-Fan- Air-Cooled Heat Exchangers Product line

  • Forced Draft - Air-Cooled Heat Exchangers

    In the forced draft configuration, fans and mechanical components are positioned below the exchanger bundle. Because the fans are in the cool air stream, horsepower requirements are slightly lower and maintenance personnel are protected from high exit air temperatures. Forced draft exchangers are well suited for high-temperature service.

    By Hudson Products Corporation based in Beasley, TEXAS (USA). from Fin-Fan- Air-Cooled Heat Exchangers Product line

  • Combined Cycle Units (GCCU)

    Ormat Geothermal Combined Cycle Units (GCCU) are designed to generate power from high-pressure geothermal steam resources. When there are non-condensable gases present in the geothermal steam, our GCCU technology provides higher efficiency, lower maintenance costs and higher electrical output in comparison to conventional condensing steam power ...

    By Ormat Technologies, Inc. based in Reno, NEVADA (USA). from Geothermal Power Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you