Geothermal Equipment For Geothermal Available In Connecticut
-
Manufactured by Total Green Manufacturing (Mfg.)based in USA
Standard Features: Refrigerant Based (Water-Free) Geothermal Heat Pump System, Two-Stage Forced Air DX Heating and Cooling, Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Smart Logic Controller, Zoning Friendly Capabilities, Dual Fuel Friendly Controller, Enhanced Compressor Protection, 2 Stage Controller, Standardized Mechanical Refrigerant Controls, High-Efficiency Copeland ...
-
Manufactured by Ak-Kim Kimyabased in TURKEY
Used to prevent calcification in geothermal water lines that contain high levels of inorganic ...
-
Manufactured by GeoSmart Energybased in CANADA
GeoSmart Energy’s PremiumGX forced air geothermal heat pump systems are ideal for temperature control in larger areas. With R-410 refrigerant, microprocessor-based controls, and heavy duty cabinets these units are built to last. They feature advanced technology and innovative components setting a new standard for large zone heating and cooling efficiency while providing you with exceptional ...
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
Manufactured by CQM Group Ltdbased in ISRAEL
Clean tubes improve efficiency, heat exchange and thermodynamic processes. ATCS actually takes care of condenser cleaning while keeping the condensers at power stations and refineries clean of fouling. With perfectly clean tubes vacuum and therefore process quality are ...
-
Manufactured by Geo-Flo Corporationbased in USA
Geo-Flo manufactures pump modules for commercial, industrial, and institutional water source heat pump and/or ground source (geothermal) heat pump applications. These PM Series modules provide engineers and contractors a variety of options for pump performance, system connection sizes and types, and building supply voltages. Our PM modules are factory assembled, wired, and leak tested saving ...
-
Manufactured by STDS-Jantz GmbHbased in GERMANY
Using our geothermal drilling tools and rotary heads enable customers to react swiftly at all times to ever-changing requirements, and at minimum cost. The advantages offered ...
-
Manufactured by Gerodur MPM Kunststoffverarbeitung GmbH & Co. KGbased in GERMANY
The GEROtherm is a geothermal pipe system based on polyethylene (PE) that fulfills the wishes of the heat absorption, resp. its optimal releasing. Due to the complexity of geothermal plants as well as influencing the effectiveness of all installed components, all intalled system components have been matched in terms of fluid dynamics and thermodynamics each ...
-
Manufactured by Frontline Wastebased in USA
A mobile Organic Rankine Cycle (ORC) power generator by a 3rd party, leader in small-scale heat-to-power generation, specially adapted to work in conjunction with the Gen-H. The Gen-E converts the heat from the waste recovery process into zero-carbon electricity. One Gen-H powers two ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
-
Manufactured by Didion Separatorbased in USA
The type DST Model is our most popular line. We design and manufacture these steam, air, or gas moisture (water) separators in the USA, and they are for a horizontal flow configuration. In Addition, they have the same guaranteed separator efficiency as all of our standard models: 99% removal of all entrainment 10 microns and ...
-
Manufactured by Drill Pipe Incbased in USA
DPI offers both Ribbed, and Smooth Stabilizers. The Product Range includes your choice of Integral or Welded Construction. Integral Stabilizers are manufactured with 4140 Q&T or 4145 Q&T Bar, trepanned to the specified ID. Welded Stabilizers are manufactured with A106B Seamless Carbon Tubes, and 4140 Quenched & Tempered Tool Joints. Stabilizers are offered with or without Fishing ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat's Recovered Energy Generation (REG) solutions complement cement plant operations and generate cost-effective electricity from unused waste heat. Even in optimized cement plants, some heat is lost, either from exhaust gases, clinker coolers or both. Ormat's REG solutions capture the residual heat and use it to generate clean, efficient electricity with no additional ...
-
based in CANADA
Generating electricity and cooling from low potential waste heat is the biggest sleeping giant of the worldwide energy market and will significantly transform the energy system globally. ...
-
Manufactured by CCm Technologies Ltdbased in UNITED KINGDOM
CCm's heat recovery and storage units store thermal energy within a chemical reaction, much like a battery and releases it rapidly as the chemical reaction ...
-
Manufactured by Enertech Global, LLCbased in USA
Revolution Series Combination models are among the most versatile geothermal heat pumps available. They can provide forced air heating, forced air cooling, domestic hot water, plus hot water for radiant floor heating, all in a single ...
-
Manufactured by EnergySmart Alternatives, LLCbased in USA
Most geothermal installations in Massachusetts are vertical closed loop systems that involve drilling. We only work with drilling companies who have experience in geothermal installations in Massachusetts. In fact, our drillers have installed literally thousands of geothermal, drinking water, and irrigation wells throughout the state. An experienced driller will have knowledge of the bedrock and ...
-
Manufactured by Econotherm Limitedbased in UNITED KINGDOM
Econotherm exhaust gas waste recovery units are widely used to deliver significant running cost and corresponding C02 reductions on many types of furnaces, ovens, boilers and process ...
-
Manufactured by Nupi Industrie Italiane S.p.A.based in ITALY
NRGeo is the system of geothermal probes and accessories for the exploitation of geothermal energy by NUPI Industrie Italiane S.p.A., specifically designed for geothermal heat pump systems that use the ground as a heat ...
-
Manufactured by GasHub Technology Pte Ltd.based in SINGAPORE
GasHub’s GH1000FCS Proton Exchange Membrane (PEM) Fuel Cell Stack is the ideal fundamental building block for all stationary and portable power requirements. The high efficiency and low fuel consumption rate of the fuel cell module delivers high quality emission-free, continuous clean power from hydrogen fuel. Featuring Gashub Proprietary manufacturing and fuel cell control technology, the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you