Geothermal Equipment Available In Iran
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
Manufactured by Barriquand Technologies Thermiquesbased in FRANCE
Compact and evolutionary, Barriquand plates and gaskets heat exchangers offer excellent thermal performances for all your fluid heating / cooling applications in chemical / pharmaceutical, agriculture / food, climate engineering, diverse ...
-
Manufactured by 247Solar Inc.based in USA
The 247Solar Heat2Power™ turbine is the first commercial turbine to produce power using atmospheric-pressure hot air, with no combustion or ...
-
based in USA
The direct application of the DeepPower Platform is considered to be an Enhanced Geothermal System (EGS). EGS is a next generation geothermal technique and does not require natural hot water reservoirs for the development of geothermal power plants. In EGS, the developer basically creates its own reservoir by drilling down into solid hot rock, injecting water at a high pressure through one well, ...
-
Manufactured by DHB Boilerbased in CHINA
You have found the producer of BOILER ECONOMIZER, there is no middleman to make the difference. Provide higher quality products and services for your ...
-
Manufactured by Thermax Limitedbased in INDIA
Heat pumps drive heat from a lower temperature to medium temperature, using high grade energy. Thermax heat pumps utilise steam, hot water, exhaust, fuel, geothermal energy or any combination of these heat sources, to pump heat. Heat pumps save approximately 35% of heat energy. Thermax heat pumps are extensively used in Europe, Scandinavian countries and China for district heating applications. ...
-
Manufactured by Hubei Teweite Power Technology Co., Ltd.based in CHINA
Original Tewatt airend from USA, two stages, with latest rotor designing and reliable bearing. Integrated compression housing design, longer service life and stability. Input shaft adopt low pressure sealing structure, smaller gear size, optimized boosting performance to ensure longer life to the screw oil. High flow design reduces fuel consumption, and provides max. 50HP power margin according ...
-
Manufactured by Hubei Teweite Power Technology Co., Ltd.based in CHINA
Volvo engine provides bigger power margin, stable performance, lower fuel consumption, and environmental. Because of their stable performance, strong power, environmental and hommization design, Volvo engine has been widely loved by global users. Through careful management of the combustion process, involving precise control of air movement and injection spray patterns, Volvo Penta has been able ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. Machine of this configuration may be realized with or ...
-
Manufactured by Shenzhen Stoll Electronics Co., Ltdbased in CHINA
A leader in vacuum diffusion bonding processing in China, with internationally advanced vacuum diffusion bonding equipment and vacuum diffusion bonding technology. ODM&OEM: Yes. MOQ: 1 pc. Supply ability: 10000 piece/pieces per month.. Port: Shenzhen. Payment terms: L/C, D/A, D/P, ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, same flow direction for the entire bladed path. Full arch admission with reaction blades as well as control stage version are available. Very simple mechanical scheme to meet the highest performance and reliability standards of a wide and diversified market, from industrial applications to geothermal needs. High speed and direct coupling ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Two cylinders, single LP cylinder. This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical although control stage versions can be supplied as well. This ...
-
Manufactured by Vacuum Process Engineering (VPE)based in USA
VPE Thermal LLC, a subsidiary of VPE, manufactures custom diffusion bonded microchannel heat exchangers (MCHEs), also known as printed circuit heat exchangers (PCHEs), for a diverse range of industries. Furthermore, these compact heat exchangers are ideally suited for high-pressure and high-temperature applications. ...
-
Manufactured by Applied Compression Systems (2023) Ltd.based in CANADA
Horsepower: 5 – 100 HP. Max. Discharge Pressure: 200 PSIG. Our Vector 6000 Series offers a compact cost-effective rotary screw compressor package utilizing a unique encapsulated unit that incorporates the compressor, oil/gas separator, oil reservoir and oil filter into one unitized ...
-
Manufactured by Geoflex Systems Inc.based in CANADA
Geoflex has what you need... Whether you require a water to air (forced air heating and cooling), water to water (hydronic heating or chilling) or both within one unit, Geoflex can answer your need. As a North American manufacturer of Geothermal Heat Pumps, we can adapt to any configuration that you may require. Geoflex can offer trouble shooting services with units that have already been ...
-
Manufactured by Shandong Wintech Technology Co.,Ltdbased in CHINA
A tubular heat exchanger, also named shell and tube heat exchanger, takes tube bundles as the heat transfer core. One fluid flows inside the tubes and the other fluid flows outside the tubes but inside a shell, thus forms cross flow to perform heat ...
-
Manufactured by Dinesh Tube ( India)based in INDIA
Alloy Steel Gr P91 Buttweld Fittings, Astm A234 Wp91 Alloy Steel Buttweld Pipe Fittings Manufacturer & Exporter, Alloy Steel P91 Seamless Buttweld Pipe Fittings, Alloy Steel P91 Welded Buttweld Pipe Fittings, Alloy Steel P91 Elbow Suppliers. ...
-
Manufactured by Thermotec GmbHbased in GERMANY
It's possible to create a design using a little construction space using the customer's data. The Thermo-Fluid S is connected directly between the oven pipe (or the heating system) and the chimney. The operating temperatures are up to 300°C (standard). The Thermo-Fluid S is low maintance with low pressure drop in the flue gas. Depending on the application you can have energy savings up to 15 ...
-
Manufactured by Patterson Industries Canada Division of ALL-WELD Company Limitedbased in CANADA
PATTERSON Industries Canada 'The Process Equipment People' designs, engineers and manufactures the PATTERSON Double Motion Grease Kettles that are extensively used in the production of lubricating greases for the automobile, aircraft, railroad and industrial applications. ...
-
Manufactured by Shanghai Shangzhen Compressor Co., Ltd.based in CHINA
Whole Skid-mounted structure, water cooling or mixed cooling, perfect automatic control and automatic protection function. Mainly used in aerospace, submarine inflatable, petroleum, metallurgy, light industry, defense industry, shipbuilding, machinery, research, cylinder testing, product testing, and other areas of high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you