Geothermal Equipment In Canada
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn 20, Centaur 40, Centaur 50, Taurus 60, Taurus 70, Mars 90,Mars 100 and Titan 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high pressure applications. C16 ...
-
PremiumManufactured by TRIC Tools, Inc.based in USA
The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...
-
Manufactured by Maritime Geothermal Ltdbased in CANADA
Our high-temperature heat pump (WH Series) is a liquid-to-water heat pump with a twist. The WH heat pump can use as its source either a typical ground loop (provided the entering water temperature does not fall below 50°F (10°C) or any clean incoming liquid that has been pre-heated to between 50°F (10°C) and 122°F (50°C). Some alternative heat sources include a buffer tank ...
-
Manufactured by GeoSmart Energybased in CANADA
GeoSmart Energy’s PremiumGX forced air geothermal heat pump systems are ideal for temperature control in larger areas. With R-410 refrigerant, microprocessor-based controls, and heavy duty cabinets these units are built to last. They feature advanced technology and innovative components setting a new standard for large zone heating and cooling efficiency while providing you with exceptional ...
-
based in USA
Unlike most gas turbines, the LM6000 is primarily controlled by the compressor discharge temperature in lieu of the turbine inlet temperature. Some of the compressor discharge air is then used to cool high-pressure turbine components. Sprint — which stands for 'Spray Inter-cooled Turbine' — reduces compressor discharge temperature, thereby allowing advancement of the throttle to ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less space, less energy and less residence time than ...
-
Manufactured by Geoflex Systems Inc.based in CANADA
Geoflex can manufacture exactly what need... Whether you require a water to air (forced air heating and cooling), water to water (hydronic heating or chilling) or both within one unit, Geoflex can answer your need. As a North American manufacturer of Geothermal Heat Pumps, we can adapt to an exact match within virtually any configuration that you may require. Geoflex offers trouble shooting ...
-
based in CANADA
Eavor’s closed-loop geothermal technology consists of several Patent Pending innovations. The Eavor-Loop is a closed-loop geothermal system within which a proprietary working fluid is contained and circulated. The working fluid is not fluid from a reservoir flowing into our wells, it is a fluid added to the closed-loop Eavor-Loop™ to create an efficient radiator, much like a ...
-
Manufactured by North American Solar Solutions-Solar DC Divisionbased in CANADA
North American Solar Solutions, these solar collectors are designed for areas where frost is present or a complete closed loop system is needed. These units can be connected in series and parallel strings, so there is no limit on collector installation quantity and it is designed to operate all year in any part of the world. These solar collectors can also be used for commercial, industrial and ...
-
Manufactured by TRAK International Green Energy Resources Inc.based in CANADA
GeoExchange systems are the most energy-efficient, environmentally clean, and cost-effective space conditioning systems available. ...
-
based in CANADA
GeoExchange systems utilize a constant, renewable, and free energy source – the warmth that is naturally stored within the earth – to provide efficient heating, cooling, and domestic hot ...
-
Manufactured by Bostech Mechanical Ltd.based in CANADA
Our experts will come out to your home and do a no cost, no obligation consultation to see if a Geothermal System is right for you. They will do an energy analysis on your home and prepare a comparison report customized to your location. They also show pictures of the installation process from start to finnish and can provide references upon request.. This education process allows you to ...
-
Manufactured by Solartron Energy Systems Incbased in CANADA
The Organic Rankine Cycle is a thermodynamic cycle which converts heat into work. The heat is supplied externally to a closed loop, which usually uses water as working fluid.Simply put, the working fluid (usually water) is pumped into a boiler. While the fluid is in the boiler, an external heat source (Solar Concentrator) superheats the fluid. ...
-
Manufactured by Dectronbased in CANADA
Premium Performance – Exceptional Efficiency - Outdoor Dry Coolers from Dectron are an ideal solution for your medium and large-scale fluid-cooled heat rejection needs. Our Dry Coolers use superior components and design to deliver a better heat rejection system available in capacities from 116 MBH to 2,300 MBH. ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
The TP10 ultrasonic thermal energy meter provides abundant capabilities for accurate thermal energy measurement of a liquid-based thermal energy production / transferring system. It is the 3rd generation energy meter from Spire Metering Technology. Compared to its predecessors, the 3rd generation offers better performance and a richer feature set, all at a lower ...
-
Manufactured by AIC Inc.based in CANADA
AIC PlateBlock heat exchangers are a compact and durable solution to challenging applications that involve aggressive media, extreme temperatures, and high pressures. Fully welded plate packs with no exposed gaskets, they offer numerous cost, size, and performance ...
-
based in CANADA
Generating electricity and cooling from low potential waste heat is the biggest sleeping giant of the worldwide energy market and will significantly transform the energy system globally. ...
-
Manufactured by Ingersoll Randbased in USA
Ingersoll Rand multi-stage high-pressure air compressors are designed for high-pressure applications. These compressors have extra heavy-duty components and are designed for minimum maintenance and maximum performance. High-pressure air compressors are widely used in power generation plant, PET blow molding industry, military, diving and component testing. ...
-
Manufactured by Geo-Air Industries inc.based in CANADA
The Geo-Vault is a one of a kind geothermal vault as it is custom designed to meet your exact specs for simple installation and trouble-free operation. The Geo-Vault is pre-assembled and is totally self contained in solid ...
-
Manufactured by AIC Inc.based in CANADA
JAD shell & coil heat exchangers are distinctly characterized by their angular connections, and by the concentric layers of helically corrugated tubes within the shell. This unique design optimizes the performance and heat transfer efficiency of the units. This line of heat exchangers is primarily designed for vertical installations and combined with their compact size, the JAD heat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you