Geothermal Equipment In Europe
-
Distributed by NewEnCobased in UNITED KINGDOM
Combined heat and power (CHP) is the generation of electricity and useful heat from the same item of plant. In most CHP installations, the electricity displaces some of the power which would be bought from the local supply network and the heat recovered from the engine supplements or in some cases replaces heat from the sites ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
The TP10 ultrasonic thermal energy meter provides abundant capabilities for accurate thermal energy measurement of a liquid-based thermal energy production / transferring system. It is the 3rd generation energy meter from Spire Metering Technology. Compared to its predecessors, the 3rd generation offers better performance and a richer feature set, all at a lower ...
-
Manufactured by Oilon Oybased in FINLAND
Oilon Geocube ground source heat pump is energy-efficient, easy-to-use and reliable. It has a clear and stylish design. In addition to the insulation of the pump body, the compressor has also been insulated by a separate casing to guarantee silent running. The pump is suitable for both new buildings and renovated sites. The Oilon Geocube ground source heat pump is designed to last and produce ...
-
Manufactured by Layne Bowler Pump Company Inc.based in TURKEY
From the Vertical Turbine family and by using some technical modifications on some of standard VTP pump parts; Layne Bowler has introduced Geo Line Brand, Geothermal ...
-
Manufactured by Acar Kardesler Drillingbased in TURKEY
Deck Engine : 460 HP, Double Diesel Engine. Mast : 110 tons Load Capacity, 4.5" - 8 mm Pipe Diameter, 15 m Length From Chassis. Drawworks Hook Load Capacity : 90 tons. Drilling Depth (4.5" Pipe) : 1200 m. Rotary zTable Ground Clearance : 350 cm. Rope Diameter : 24 mm (6x36). Alternator : 125 kVA. Substructure : ...
-
Manufactured by Thermal Earth Ltdbased in UNITED KINGDOM
ASHPs are an alternative heating system to conventional gas or oil boilers. They are units which are installed outside a property which use thermal energy from the outside air to provide heating and hot water for a building. Air source heat pumps are a low-carbon, renewable technology. They offer efficiencies up to 300% which can significantly reduce the cost of your energy ...
-
Manufactured by Blue Heat bvbased in BELGIUM
The Blue Tower I is the second Blue Heat brainchild, whereby hot water of over 95°C is produced by means of dirt laden waste steam condensation. The Blue Tower technology makes it possible to extract the heat from waste vapours in an efficient and profitable manner. This technology can be applied to the most contaminated of vapours, consistently recuperating the heat so it can be used ...
-
based in UNITED KINGDOM
Worldwide there is an estimated 40,000GWhe of energy lost from steam systems. The Heliex Steam expander provides a method to recover some of these ...
-
Manufactured by AIC Inc.based in CANADA
AIC PlateBlock heat exchangers are a compact and durable solution to challenging applications that involve aggressive media, extreme temperatures, and high pressures. Fully welded plate packs with no exposed gaskets, they offer numerous cost, size, and performance ...
-
by EcoGenR8 Ltdbased in UNITED KINGDOM
Our waste heat solution will convert even low grade heat – whether liquid, steam or gas – into green ...
-
Manufactured by Free Energy Innovation ASbased in NORWAY
Solar radiation hitting the earth's surface can be used for a lot of things. We are talking primarily about solar collectors for heating and hot water preparation and solar panels for production of electricity. But now it is even possible to get both electricity and heating from the same panel, so-called hybrid panels (PV/T). Solar radiation may also be used for passive heating and daylight ...
-
Manufactured by Wartsila Corporationbased in FINLAND
Our compressors can be configured to suit a diverse range of high pressure applications for both air and other compressible gases.We offer a range of options, from a basic compressor block to a fully integrated compressor package solution for high pressure air or gas. We are also able to incorporate ancillary items, such as nitrogen generation and air/gas driers, into the scope of supply. The ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Along with its 150 years of experience in the electrical and mechanical engineering business together with its in-house capability for all major components, such as generators, steam and gas turbines, Ansaldo Energia offers multiple choices: from the turboset package, which can be supplied as a standalone equipment or by integrating the thermal cycle to provide the entire power island, to the ...
-
based in AUSTRIA
This ground source heat pump guarantees highest efficiencies, developed by the heat pump-pioneer M-TEC with around 4 decades of experience. Up to 20% higher efficiency due to intelligent power control. ...
-
Manufactured by CCm Technologies Ltdbased in UNITED KINGDOM
CCm's heat recovery and storage units store thermal energy within a chemical reaction, much like a battery and releases it rapidly as the chemical reaction ...
-
Manufactured by Daigon Renewables Ltd.based in IRELAND
High Quality Geothermal Manifolds Manufactured with PPR fittings and pipe making them robust and long lasting with easy installation. All products are made to order and can range from 2” through to 6” manifolds and valves contact us with your needs; 6 port Geothermal Manifold with isolation valves and auto air vent; 8 port Geothermal Manifold with isolation valves and auto air vent; ...
-
Manufactured by Kensa Heat Pumps Ltdbased in UNITED KINGDOM
Pre-coiled slinkies: Kensa Heat Pumps manufactures pre-coiled slinkies on-site for supply with all Kensa ground source heat pumps, enabling ease of ...
-
Manufactured by BTI Gumkowski Sp. z o.o. Sp.k.based in POLAND
The BASIC burner is a device with a very simple structure, characterized by high pellet combustion efficiency. PIt is equipped in not mobile chamber in order offer budget solution. In addition, these burners, like rotary burners, are remotely controlled, which significantly increases the comfort of use. Currently, our offer includes burners with power from 4 to 26 kW. Particularly noteworthy ...
-
Manufactured by HAUG Sauer Kompressoren AGbased in SWITZERLAND
The HAUG.Mercure series is used for gas recovery and booster compression of gases such as helium, SF6, oxygen, nitrogen and Natural gas, as well as for booster compression of compressed air. HAUG.Mercure compressors have the electric motor in the gas compartment. Power is supplied to the electric motor through a gas-tight connection in the crankcase. This construction, developed by HAUG Sauer, ...
-
Manufactured by Dantonit A/Sbased in DENMARK
DantoCon Thermal C2H is used for environmental sealing and thermal optimisation of geothermal energy wells. The product is delivered as a ready to mix dry powder and needs only to be mixed with freshwater before use. Mixed with water, DantoCon Thermal C2H yields a sealing mixture, which combines high thermal conductivity with the ability to withstand environmental inflictions over ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you