Geothermal Equipment In Netherlands
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn® 20, Centaur® 40, Centaur 50, Taurus™ 60, Taurus 70, Mars® 90,Mars 100 andTitan™ 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high ...
-
Manufactured by Zantingh B.V.based in NETHERLANDS
In many sectors plate heat exchangers are used to separate heat circuits, for example, in industry, non-residential construction and the geothermal sector. (Plate heat exchangers are also referred to as isolating heat ...
-
Manufactured by Gastreatment Services (GTS)based in NETHERLANDS
Gastreatment Services (GtS) has three types of flares, which we export worldwide. Our flares are individually designed for the capacity specified by the NER. The ATEX, CE and PED guidelines are followed for this as standard. ...
-
Manufactured by Gastreatment Services (GTS)based in NETHERLANDS
GtS provides gas mixing systems to add natural gas to geothermal gas to achieve a minimum caloric value. Also for other gasses GtS can design and build gas mixing stations, for example for adding air to biogas in order to make Active Carbon work properly or if the natural gas quality fluctuates a lot. In order to use geothermal gas, it has to be cleaned first. GtS can provide an installation that ...
-
based in NETHERLANDS
The flare systems are useable for flaring gases like sweet natural gas, sour natural gas and other. These flare systems are also useable as vent systems, for venting gases like ...
-
Manufactured by Gastreatment Services (GTS)based in NETHERLANDS
The secondary network is heated from the geothermal installation. With this warm water, the heat is supplied to the grower in the collection ...
-
Manufactured by Gastreatment Services (GTS)based in NETHERLANDS
This installation is built from the following parts: Inlet valve. Gas/gas heat exchanger. Gas/water heat exchanger. Cold water machine. Coalescing filter. Gas pressure regulation with safety shut off valve. Outlet valve. Pressure regulator and pneumatic blow down valve. Condensate storage with pump. Instrumentatation (manometers etc.). ...
-
Manufactured by Pleuger Water Solutionsbased in NETHERLANDS
Pleuger Water Solutions develops ecological waterpumps that allows you to control the temperature inside buildings. This thermal storage systems use the earths heat to effectively warm up large buildings. This is a very efficient en sustainable way of heating. This system makes sure that the buildings are cool in the summer and hot in the winter. Thermal storage is especially suitable for ...
-
based in ICELAND
Principal Particulars: Drilling depth theoretical: 5.500 m / 17.800 ft with 5″ DP range 3. Year of construction: 2007. Fast moving trailer mounted automatic drilling rig. Designed for cold climate and Geothermal applications and is fully capable of working in heavy winds. Year of construction 2007. It is capable of drilling to 5500 m. with 3 ½“ DP and to 4000 m. with 5” ...
-
based in ICELAND
Principal Particulars: Drilling depth theoretical: 1800 m. Year of construction: 1998. Trailer mounted hydraulic powered topdrive drilling rig, Drillmec - G102. Geothermal drilling rig. Not suitable for oil and gas drilling. Pull-Back Capacity, 100.000 kg. Loads, in Transport 30-40. Drilling Crew per shift: 6. Rig mechanic: ...
-
Manufactured by Horconex B.V.based in NETHERLANDS
In very simple terms, a buffer tank is a storage tank for warm water, i.e. a heat storage tank, that can be used to improve the efficiency of your heating system. Heat that has already been generated can be stored in the buffer for use later on. The required capacity of the buffer tank will be calculated by HORCONEX as an integral part of the heating system design for your whole ...
-
Manufactured by Geurts Heatexchangers B.V., part of Heilig Groupbased in NETHERLANDS
Heat exchangers are increasingly being used in different industries, often as part of heating or air-conditioning systems. They can be implemented in factories and buildings to save energy, reduce costs, save CO2 and also to save time. On this page, we will introduce the topic of tubular heat exchangers further by answering multiple questions. ...
-
based in NETHERLANDS
Heating for every crop KG Greenhouses can provide heating and cooling for any crop, with the goal of lowering heating costs at the forefront of every design. This is accomplished, among other things, by incorporating heat sources such as geothermal energy, biomass, and solar ...
-
Manufactured by Eclectic Energy Limitedbased in UNITED KINGDOM
The StealthGen Wind Generator is a new direct-drive wind generator, designed for a variety of microgeneration applications. It is exceptionally quiet and vibration-free in operation, qualities that are of paramount importance for any wind generator operating in close proximity to people. The StealthGen features a powerful 3-phase alternator, and computer-designed rotor blades optimised for low ...
-
Manufactured by HakaGerodurbased in SWITZERLAND
The GEROtherm Koax is an extension to the proven double-U geothermal probes. Two pipes of DE 63 mm and DE 40 mm pushed into one another create a single coaxial probe. The brine liquid flows downwards through the annular gap and upwards in the interior pipe. The liquid is warmed up in the heating mode and respectively cooled down in the air conditioning ...
-
Manufactured by HakaGerodurbased in SWITZERLAND
As the space available for geothermal probe boreholes has become less and less, particularly in large cities, deeper boreholes of >200 m are often required. In these applications GEROtherm geothermal probes PN20 are excellently suitable and provide additonal security for contractors and house ...
-
Manufactured by HakaGerodurbased in SWITZERLAND
The well-established GEROtherm-geothermal probe with low hydraulic resistance has been approved for several years and in more than 250'000 ...
-
Manufactured by HakaGerodurbased in SWITZERLAND
Earth collectors are used for detached and semi-detached houses in rural areas. The heat is taken away using horizontally laid pipelines in the area of the plot that is not built over. HakaGerodur AG offers earth collector pipes made of PE-100 and KITs, which include the complete brine circuit. The dimensioning complies with VDI4640. We will be glad to send you reference tables on the current ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you