Geothermal Equipment In Switzerland
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn 20, Centaur 40, Centaur 50, Taurus 60, Taurus 70, Mars 90,Mars 100 and Titan 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high pressure applications. C16 ...
-
based in SWITZERLAND
In TVR systems, part of the vapour generated in the evaporator is combined with high-pressure steam in the Thermal Compressor (“booster”). The resulting vapour stream is the evaporator heating medium. TVR can be combined with MEE, to increase the operation’s energy efficiency. Theoretically, a TVR single effect unit has, approximately, the energy efficiency of a double ...
-
Manufactured by HAUG Sauer Kompressoren AGbased in SWITZERLAND
The HAUG.Mercure series is used for gas recovery and booster compression of gases such as helium, SF6, oxygen, nitrogen and Natural gas, as well as for booster compression of compressed air. HAUG.Mercure compressors have the electric motor in the gas compartment. Power is supplied to the electric motor through a gas-tight connection in the crankcase. This construction, developed by HAUG Sauer, ...
-
Manufactured by Gerodur MPM Kunststoffverarbeitung GmbH & Co. KGbased in GERMANY
The GEROtherm is a geothermal pipe system based on polyethylene (PE) that fulfills the wishes of the heat absorption, resp. its optimal releasing. Due to the complexity of geothermal plants as well as influencing the effectiveness of all installed components, all intalled system components have been matched in terms of fluid dynamics and thermodynamics each ...
-
Manufactured by HakaGerodurbased in SWITZERLAND
Earth collectors are used for detached and semi-detached houses in rural areas. The heat is taken away using horizontally laid pipelines in the area of the plot that is not built over. HakaGerodur AG offers earth collector pipes made of PE-100 and KITs, which include the complete brine circuit. The dimensioning complies with VDI4640. We will be glad to send you reference tables on the current ...
-
Manufactured by Gerodur MPM Kunststoffverarbeitung GmbH & Co. KGbased in GERMANY
Our geothermal probes and piping systems are suitable for the use of geothermal energy (heat / cold) or removal (accumulation) of excess heat into the ground. To do this, we use a closed vertical ground probes with connection system and ...
-
based in SWITZERLAND
Cooling, heating, acoustic and air supply from a single source. The Hybrid radiant ceiling module from Barcol-Air combines the system functions required in an office to ensure thermal and acoustic comfort in a simple way. In addition it includes air discharge features and ...
-
Manufactured by Gebwell Ltd.based in FINLAND
Gebwell T3 Inverter is an efficient, smart inverter-controlled heat pump for large heating demand. The Gebwell T3 Inverter heat pump is ideal for heating in buildings larger than one-family houses, such as large villas, semi-detached homes, small apartment buildings and small and medium-sized warehouses and industrial buildings. Thanks to a stepless inverter control system, the heat pump always ...
-
based in SWITZERLAND
Our efficient, powerful and lightweight compressors fuse leading-edge automotive technologies to boost next-generation fuel cells and promote the adoption of zero-emission cars and trucks. Garrett has been at the cutting edge of fuel cell innovation for more than 40 years. We launched the auto industry’s first fuel cell production car application in 2016, and now our global footprint and ...
-
Manufactured by Gerodur MPM Kunststoffverarbeitung GmbH & Co. KGbased in GERMANY
Concrete building elements may not always be used only as a carrier or architectural elements. Concrete can be used as a battery or conductor of heat. Particularly in Austria and Germany in recent years, concrete elements connected to the soil used for efficient heating and cooling systems. Installation of heat exchanger can be done only during construction of buildings. Supplementing existing ...
-
based in SWITZERLAND
For the last years a lot of development work has gone into perfecting the heat exchange processes between fluids. Efficiency and price/performance ratios of the plate coolers have improved so dramatically that they have become the standard heat exchanger. High cooling capacity and compact design with low material use and extremely low cooling water consumption are the main features of this ...
-
Manufactured by HakaGerodurbased in SWITZERLAND
The GEROtherm Koax is an extension to the proven double-U geothermal probes. Two pipes of DE 63 mm and DE 40 mm pushed into one another create a single coaxial probe. The brine liquid flows downwards through the annular gap and upwards in the interior pipe. The liquid is warmed up in the heating mode and respectively cooled down in the air conditioning ...
-
Manufactured by HakaGerodurbased in SWITZERLAND
The well-established GEROtherm-geothermal probe with low hydraulic resistance has been approved for several years and in more than 250'000 ...
-
Manufactured by Gebwell Ltd.based in FINLAND
The first inverter ground source heat pump in the market with a non-stop connection to the factory. Gebwell Aries is the first Finnish ground source heat pump for detached houses that utilises advanced inverter technology and IoT ...
-
Manufactured by HakaGerodurbased in SWITZERLAND
As the space available for geothermal probe boreholes has become less and less, particularly in large cities, deeper boreholes of >200 m are often required. In these applications GEROtherm geothermal probes PN20 are excellently suitable and provide additonal security for contractors and house ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you