Geothermal Equipment Near Australasia
-
Manufactured by Teralba Industries Pty Ltdbased in AUSTRALIA
The Dimpleflo Double Pipe Heat Exchanger (also known as “Tube-in-Tube”) is the simplest and most robust configuration of hygienic heat exchanger. Dimpleflo tube in tube heat exchangers are utilised for fluids containing stringy fibres, chunks or other particles and low-high viscosity ...
-
based in AUSTRALIA
The Agenitor is a highly efficient power plant with optimsed gas engine and lower fuel costs. This engine is a result of intensive work by the 2G development team at 2G Drive GmbH. It's improved combustion chamber geometry has made it possible to increase the efficiency of the Agenitor range. ...
-
Manufactured by Rockpecker Limitedbased in UNITED KINGDOM
The global geothermal drill bits market is segmented into tricone bits, polycrystalline diamond compacts (PDC) bits, and other bits such as drag bits. Geothermal drilling bits are used in dry steam power plants, flash steam power plants, and binary cycle power plants. Major types of bits used in geothermal drilling include tricone bits, polycrystalline diamond compacts (PDC) bits, and others ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
Manufactured by TRIC Tools, Inc.based in USA
The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...
-
Manufactured by Kensho China Limitedbased in CHINA
The K21 engine controller is designed for the off-road stationary diesel engine market. It is a cost effective entry level control panel. The controller’s primary function is the management of your diesel engine. The software and hardware are designed to be simple and easy to use. The K21 is used in the following in a basic application: waste water de-watering, irrigation pumping, ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
The TP10 ultrasonic thermal energy meter provides abundant capabilities for accurate thermal energy measurement of a liquid-based thermal energy production / transferring system. It is the 3rd generation energy meter from Spire Metering Technology. Compared to its predecessors, the 3rd generation offers better performance and a richer feature set, all at a lower ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
Spire Metering’s T-MAG electromagnetic BTU meter is designed to accurately measure the heat or cold energy of a water heating/cooling circuit. It is consisted of three parts, an electromagnetic flow sensor, a pair of temperature sensors and a main unit. The main unit is a powerful console which combines high accuracy flow measurement, temperature measurement and BTU ...
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn® 20, Centaur® 40, Centaur 50, Taurus™ 60, Taurus 70, Mars® 90,Mars 100 andTitan™ 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the data centre industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the cooling of data centre ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the brewery industry. Electricity and heat recovered from a gas engine can be deployed at high efficiency for useful onsite use. This gives the ability to reduce operational costs and reduce carbon emissions. Converting the heat into cooling via absorption chillers is called combined cooling heat and power (CCHP) or ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...
-
based in AUSTRALIA
Historically, many projects that require drilling have been restricted by geography and cost. For example, most geothermal plants are limited to shallow access regions such as Iceland and Costa Rica, with prohibitively high initial drilling costs making it an expensive and risky ...
-
based in ICELAND
Principal Particulars: Drilling depth theoretical: 5.500 m / 17.800 ft with 5″ DP range 3. Year of construction: 2007. Fast moving trailer mounted automatic drilling rig. Designed for cold climate and Geothermal applications and is fully capable of working in heavy winds. Year of construction 2007. It is capable of drilling to 5500 m. with 3 ½“ DP and to 4000 m. with 5” ...
-
based in ICELAND
Principal Particulars: Drilling depth theoretical: 1800 m. Year of construction: 1998. Trailer mounted hydraulic powered topdrive drilling rig, Drillmec - G102. Geothermal drilling rig. Not suitable for oil and gas drilling. Pull-Back Capacity, 100.000 kg. Loads, in Transport 30-40. Drilling Crew per shift: 6. Rig mechanic: ...
-
Manufactured by Clayton Industriesbased in USA
Clayton manufactures a line of Steam Generators to provide superheated steam. These units use the same proven design as the basic Steam Generator that produces saturated steam, but with the addition of an integral super-heater section to the helical coil, in which the steam is superheated. The use of the integral super-heater section eliminates the need for a separately fired ...
-
Manufactured by GasHub Technology Pte Ltd.based in SINGAPORE
GasHub’s GH1000FCS Proton Exchange Membrane (PEM) Fuel Cell Stack is the ideal fundamental building block for all stationary and portable power requirements. The high efficiency and low fuel consumption rate of the fuel cell module delivers high quality emission-free, continuous clean power from hydrogen fuel. Featuring Gashub Proprietary manufacturing and fuel cell control technology, the ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less space, less energy and less residence time than ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you