Geothermal Equipment Near Texas
-
Manufactured by Tricor Metals Incbased in USA
Special Applications/Features; Mechanical (roller) expanded tube-to-tubesheet joints. Hydro-expanded tube-to-tubesheet joints. Seal-welded tube-to-tube sheet joints. Strength-welded tube-to-tube sheet joints. Thermal oxide coating designs for added erosion & corrosion resistance. Extended surface tubing available. Flush mount tube to tube sheet for full drain-ability. Polishing requirements ...
-
Manufactured by Tricor Metals Incbased in USA
Flush mount tube to tube sheet for full drainability, Polishing requirements up to 15 Ra, Double tube sheet design, Platinum spotting for tantalum units, Leak detection ports on loose lined tube sheets, Solid or explosive bonded design to fit your ...
-
Manufactured by Tricor Metals Incbased in USA
Special Applications: Tantalum units can be supplied with platinum spots. Custom designs to meet your specific requirements We also build shell and tube and plate heat ...
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn® 20, Centaur® 40, Centaur 50, Taurus™ 60, Taurus 70, Mars® 90,Mars 100 andTitan™ 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high ...
-
Manufactured by D & H Equipment, Ltd.based in USA
Heat exchangers are a vital part of your heating requirements and at D&H Equipment we design and manufacture our own line of heat exchangers. Heating viscous fluids such as asphalt and bitumen often require a custom design to accurately transfer product for polymer blending and at the load rack. D&H Equipment manufactures shell and tube design heat exchangers that conforms to ASTM ...
-
Manufactured by Geo-Systems USAbased in USA
3/4HP, 3 SPEED, CAST IRON, UPS40-160/2. Volt: ...
-
Manufactured by Fecon, Inc.based in USA
The Fecon GL300 Geothermal Drill is a rubber track drill rig designed to meet the needs of the residential and small commercial geothermal industry. When it comes to drilling geothermal ground loops, crews want efficient access to the drill hole site, advanced drilling capabilities, and the ability to remove equipment with minimal environmental disruption. Get in. Drill down. Get out. The Fecon ...
-
Manufactured by DeepRock Manufacturing Co.based in USA
All the DR150 rigs feature a sliding tophead. With a press of a lever, the drilling motor assembly (the tophead) slides over to the left and gives completely clear access to the borehole for the winch. This is essential when installing the casing and pump into the finished well. The the winch sheave assembly at the top of the mast can be hydraulically extended to 21 feet for easy handling of ...
-
Manufactured by ClimateMaster, Incbased in USA
Part-load values up to 45.1 EER/ 8.7 COP, Q-Mode Technology (QE Only), vFlow® Internal Variable Water Flow Control, iGate® Communicating Controls, Variable Speed ECM Indoor Fan, Vertical, Horizontal (field convertible discharge), and Downflow Configurations. Only dealers who have been trained on both the following classes in the past two years can sell the Trilogy: CM202 Service ...
-
Manufactured by ClimateMaster, Incbased in USA
Part Load Values up to 34.4 EER/ 7.0 COP, 2-Stage Compressor, vFlow® Internal Variable Water Flow Control, iGate® Communicating Controls, Variable Speed ECM Indoor Fan, Vertical, Horizontal (field convertible discharge),and Downflow ...
-
Manufactured by ClimateMaster, Incbased in USA
Part-load values up to 29.4 EER/ 5.5 COP, 2-Stage Compressor, vFlow® Internal Variable Water Flow Control, iGate® Communicating Controls, Variable Speed Indoor Fan, Vertical and Horizontal ...
-
Manufactured by ClimateMaster, Incbased in USA
Part-load values up to 29.5 EER/ 6.1 COP, 1-Stage Compressor, External Fixed Speed Water Flow Control, Non-Communicating Controls, Single Speed Indoor Fan (Standard), Variable Speed Indoor Fan (Optional), Vertical, Horizontal, and Downflow ...
-
Manufactured by Integrated Flow Solutions, Inc. DXPbased in USA
Integrated Flow Solutions Heat Transfer/Hot Oil Systems are designed to store and transfer heat transfer fluids used for industrial heating. The heat transfer fluid is normally stored in an elevated insulated vessel skid mounted. Special high temperature centrifugal pumps are used to circulate the heat media fluid from the storage tank through an electric process heater, gas fired heater or ...
-
Manufactured by Mills Machine Companybased in USA
Mills Machine GEOCLAW® Bits were designed specifically for the geothermal drilling industry. Its construction is more versatile and its performance is superior to other smaller bullet bits previously ...
-
Manufactured by K & S Equipment and Machinery Corporationbased in USA
Also in order to meet most of the market requests, we offer a series of boosters for compressing gases such as NITROGEN, CO2, LPG and HYDROGEN with maximum discharge pressures of 650 PSI. The units come in both Piston & Screw type depending on the application. Our oil free high pressure compressors with ISO-8573-1, Class 0 approval are very well suited for PET & Plastic ...
-
Manufactured by Graham Corporationbased in USA
The Graham Heliflow Heat Exchanger is uniquely designed and engineered to handle difficult heat transfer applications. Graham created the Heliflow to be exceptionally versatile, yielding heat transfer rates that can be more than 40% better than typical shell and tube designs. The Heliflow Heat Exchanger encompasses a spiral coil of multiple parallel tubes mounted within a casing. The case/coil ...
-
Manufactured by Graham Corporationbased in USA
By producing a vacuum at the turbine discharge, condensers increase the overall cycle efficiency. Graham has more than 70 years of design and fabrication experience in the steam surface condenser field. Our knowledge allows for an expedient, accurate design and fabrication process. Using design methodologies and practices that have been honed over time, we work closely with our customers to ...
-
Manufactured by Baker Hughesbased in USA
Increase roller cone drill bit life for improved geothermal energy economics. Vanguard Geothermal™ roller cone drill bits increase drilling time and reduce bit trips. Use these bits for continuous drilling up to 550 deg. F [288 deg. C]. You can rely on our patented metal-face seal with high-temperature elastomer components to improve green energy drilling economics. Traditional roller cone ...
-
Manufactured by International Battery Metals, Ltd.based in USA
At International Battery Metals, we have innovated a cost and resource efficient lithium extraction method which serves as a clean, socially conscious alternative to traditional ...
-
Manufactured by Tenarisbased in USA
Within our advanced portfolio to accompany the energy transition, Tenaris has developed a new generation of high performance hydrogen storage systems under extreme working pressure, combining the highest quality large steel tubular vessels with customized engineering services. All our hydrogen storage systems incorporate Thera™ technology - Tenaris Hydrogen Embrittlement Resistant Alloys - ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you