Only show results available in Connecticut? Ok

Archimedean Screw Turbine equipment for Hydro Energy

  • Hydropower Plants

    A sole interlocutor for designing and installing of hydropower plants. EPF Energy is an EPC Contractor specialized in the designing and manufacturing of hydroelectric power stations in Italy and abroad. With internal skills that range from feasibility studies to project financing, from design to installation and commissioning, EPF Energy can ...

    By EPF Elettrotecnica S.r.l. based in Carrù (Cn), ITALY. from Renewable Energy Product line

  • FishFlow - Fish-friendly Screw Hydro Turbine

    The FishFlow screw pump annex hydroturbine is a special version of the fishfriendly screw pump that can not only be used to pump water, but that can also function as a fishfriendly turbine to generate electricity. To function as a turbine the Archimedean screw is lowered until the waterlevel upstream of the screw is higher than the upper end of ...

    By FishFlow Innovations based in Medemblik, NETHERLANDS.

  • Hidroturbin - Model Arvida™ - Hydropower Plants (HEPP)

    Hydroelectric power plants (HEPP) aim to generate electrical energy using the potential energy of the water. In order to generate energy, run-of-river plants separate river from its course and convey it by transfer structures in order to acquire desirable head then dispatch the water through pressured pipes (penstocks) to the turbines. This ...

    By Hidroturbin based in Çankaya/ANKARA, TURKEY. from Archimedean Screw Turbine Hydropower Plants Product line

  • Hydromew - Archimedean Screw Turbines

    Worm water turbines also known as Archimedes turbines. Rotors sized 700mm – 4000mm. The flow of 0,5m3/s to 12m3/s. Optional 4 (rather than the usual 3) bladed turbine to reduce diameter and allow for quiter more efficient operation. Flow of water controlled through mechanical adjustment. Possible delivery of structures mounted on the weir, ...

    By Hydromew Sp. z o.o. based in Elblag, POLAND.

  • Archimedean Screw Generator

    All the benefits of existing Archimedes Screw technologies,Suited to heads of 1-4m with fl ows of 300-900l/s (greater in parallel operation, Durable toughened plastic Triple Helix: lightweight, non-corroding, economical, Potential to generate 25Kw/screw @ 75%+ water to wire effi ciency, Turbine manufactured in UK, easily transported and ...

    By Ham Baker Group based in Stoke-on-Trent, UNITED KINGDOM. from Renewables Product line

  • Hydroalp - Hydrodynamic Screw Turbines

    Hydroalp provides hydrodynamic screws for low head plants from a few meters to tens of meters and with flow rates from a few cubic meters up to a few tens of cubic meters per second. Screws (or Archimedean screws) are the ideal solution for all those power plants, where the use of Kaplan models would be uneconomic due to the combination of low ...

    By Hydroalp S.r.l. based in Cimego, ITALY. from Turbines Product line

  • Landustrie LANDY - Hydropower Screw Turbines

    The new range of the Landustrie screw pump covers the hydropower screw turbines. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 meter.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Hydropower Product line

  • Archimedean Screw Hydro Turbines

    The system is based on the Archimedian screw principle and is used as a water engine for small water power plants working with asynchronic generator ditrectly into a network. It is used for small water heads and inconstant water flow. Hydrodynamic screw can be used as an additional motor to existing turbines (Banki, Kaplan) using the energy of ...

    By GESS-CZ, s.r.o. based in Hranice, CZECH REPUBLIC.

  • Hydrodynamic Screws

    PAE-type Hydrodynamic Screws by RONCUZZI are systems designed for the production of electric energy. Inspired by the Archimedes screw, which traditionally has been used for lifting water, the Hydrodynamic Screw reverses the principle and exploits the difference of potential energy of water between two different points on its downhill course. The ...

    By RONCUZZI S.r.l. based in Mezzano (RAVENNA), ITALY. from Renewable Technology Product line

  • Pumpen Strebe - Environmentally Friendly Energy Technology

    High energy costs, impeded delivery of raw materials, limited resources, the pollution of the atmosphere and associated global warming call for new approaches with regards to energy and heat supply.

    By PS Pumpen Strebe based in Wusterhusen, GERMANY.

  • Archimedean Screw Generators

    They move slowly. It isn’t about speed, but mass and balance. The balance is between efficiency, fish and environmental protection. Screw generators extract the potential energy from large blocks of slowly downward moving water. The mass of the water turns the tilted screw. The flow of that mass is controlled by hydraulically driven sluice ...

    By New England Hydropower Company, Inc. based in Beverly Farms, MASSACHUSETTS (USA).

  • Planetary Silo Dischargers

    Agora Services Planetary Silo Dischargers are designed for use in flat bottomed silo for unloading difficult flowing materials such as coal, ash, cereal meal, etc. The drive mechanism gives both rotational and progression movement to an Archimedean screw allowing the discharger to work on the principle 'first in first out', by drawing material ...

    By Agora Services Limited based in Northants, UNITED KINGDOM.

  • Hydropower Screw Turbine

    Since ancient times, the hydropower screw has been known as an 'Archimedean screw'. The key factor with it, is that the reversal of its function provides an efficient means of saving energy. With collaboration with REHAR GMBH and Jash India, Electhrone Technology is proud to bring this product into Malaysia.REHART hydropower plants are ...

    By Electhrone Technology Sdn Bhd based in Kuala Lumpur, MALAYSIA.

  • SAS - Horizontal Screw Diameter

    Galvanised tube. Archimedes screw. Rotation speed 475 tr/mn. Flow with PS 0,75 : 220 qx/h. Belts transmission.

    By SAS René TOY based in Montoire sur le Loir, FRANCE. from Handling Product line

  • Archimedean Screws

    Coutex screw pumps are specialist equipment for the pumping of wastewater, rainwater, drinking water and mud. This tool, over 2,000 years old, has been developed and perfected to adapt to all eras. Today, Coutex offers the design, manufacture, assembly and start-up of this machine with projects suited to each client and situation. Archimedes ...

    By Sorigué, S.A.U. based in Lleida, SPAIN.

  • Greenbug - Archimedean Screw Generator

    At least 400 Archimedes screw generators (ASGs) have already been installed in Europe since 1993 (Lashofer et al., 2012) and more are under construction, however there are currently few installations outside Europe. GreenBug connected the first ASG to the North American power grid in September, 2013, near Waterford, Ontario.

    By Greenbug Energy Inc. based in Delhi, ONTARIO (CANADA).

  • GreenBug - Control Panels

    GreenBug Energy has developed the following Fixed Speed Control Panels for our grid tied Archimedes screw generator systems. Our Fixed Speed Induction Generator Controls Panels are designed for interconnection with the utility for either net metering or revenue producing applications such as Feed in Tariff programs.

    By Greenbug Energy Inc. based in Delhi, ONTARIO (CANADA).

  • Hydracone - Extraction System Conical Bottom Silo

    The HYDRACONE system is a conical discharger that can be used to extract heavy or light, powdery or fibrous products, dry or wet, with a low natural flow capability, stored in conical bottom silos.

    By MORILLON Company based in Andreze, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you