Hydro Energy Manufacturers, Suppliers & Companies Near Italy
-
Manufacturerbased in Roncello (MB), ITALY
Since 1969 Flame Spray has been the first Italian job shop to actively promote Thermal Spray coatings and activities. Today it is an international benchmark for applications in these markets: Energy - Gas turbine, Steam turbine, Waste burners, Oil ...
Caboflam - Erosion Carbide Coating
Caboflam H trademark identifies Flame Spray's technological processes for carbide coatings in metallic matrix through high-pressure combustion equipment (HP/HVOF). These types of coatings exhibit excellent bond strength, higher micro hardness and ...
CONTACT SUPPLIER -
Engineering service providerOffice in ITALY
Pöyry is an international consulting and engineering company. We serve clients globally across the energy and industrial sectors and locally in our core markets. We deliver strategic advisory and engineering services, underpinned by strong project ...
Small Hydropower Services
Climate change puts pressure on managing power in a way that is sustainable for generations to come. One option is to invest in small hydropower and to capitalise on river resources in a decentralised manner. The contribution of small hydropower to ...
CONTACT SUPPLIER -
Manufacturerbased in Rocca di Caprileone (ME), ITALY
SALUPO S.a.s. is an Italian concern specialized since more than 18 years in the control panels’ planning and realization for the management of water lifting apparatus. The high qualitative standards and the competence of its cooperators, allowed the ...
-
Service providerbased in Rome, ITALY
Enel Green Power is the Enel Group company dedicated to renewable energy with a presence in Europe and in the American continent. It is among the industry leaders worldwide thanks to its 25 billion KWh generated from a well balanced energy mix ...
EGP - Hydroelectric Power Services
The generation of hydroelectric energy occupies the first place at a global level. In Europe the hydroelectric potential is now being entirely utilised. This is why, Enel Green Power is now concentrating on run-of-river hydro power, a type of system ...
CONTACT SUPPLIER -
ManufacturerOffice in Siena (SI), ITALY
Established in 1967, Nencini brings over 45 years of design and manufacturing experience to accomplish any job efficiently and effectively. Initially producing air valves for hydraulic power plant and discharge valves for potable and irrigation ...
Double Flanged Sleeve Valves
They allow a very high upstream pressure loss, without any risk of critical phenomena (cavitation, vibration, noise) even with little downstream head pressure. They are also used as synchronous discharge tool for turbine plants (mainly Pelton or ...
CONTACT SUPPLIER -
Distributorbased in Battipaglia (SA), ITALY
Tecno Fluid Service has the solution to all hydraulic problems. It is a firm that that supplies and repairs hydraulic components of leader companies that have the following sector applications: energy, industrial, marine, aviation, construction, ...
Hydraulic Fluid Service
Tecno Fluid Service , a technologically advanced company conscientious to customer needs, specializes ...
CONTACT SUPPLIER -
Service providerbased in Prato, ITALY
Cellini GTC has a 'technologic: base of of planning, management and control of all the processes related to the implementation of big comission orders, from the planning to the testing and maintenance of the works done. Cellini GTC has then found a ...
-
Manufacturerbased in Modena, ITALY
MITA Oleodinamica produces complete lifting systems for tractors. Working side-by-side with the client, we deliver tailored compact solutions with top-class efficiency. We also manufacture and deliver the single parts of the system, i.e. hydraulic ...
Mita - Electronic Hydraulic Power Lifts
Electronic Hydraulic Power Lift for Lifting Capacities Up to 2000 ...
CONTACT SUPPLIER -
Manufacturerbased in MODENA, ITALY
HANSA-TMP Group, is an international Group established in Modena in 1984. With seven branches all around the world the company is the perfect partner for all projects requiring fluid technology in connection with hydraulics, electronics and ...
-
Manufacturerbased in Modena, ITALY
SAI is a leading company in the design and production technology of crankshaft radial piston hydraulic motors. The values behind SAI’s success are based on the company’s employees and their spirit of initiative, innovation and the search for ...
-
ManufacturerOffice in Ferrara, ITALY
Zurich Instruments is a test and measurement company headquartered in Zurich, Switzerland, developing and selling measurement instruments along with premium customer support in key markets around the ...
-
ManufacturerOffice in Pula, CROATIA
RÖSSL & DUSO was created in 1969; the company has seat in Vedelago in the province of Treviso, in a strategical location only 40 km away from the International airport of Venice (VCE), 20 km away from the Treviso Airport (TSF) and 35 km away from ...
Distributor Francis Turbine
Distributor Francis Turbine Ext. Diam. 3.000 mm. Height 2.000 ...
CONTACT SUPPLIER -
Distributorbased in Reggio Emilia, ITALY
Rama Motors distributes in Italy diesel, petrol and gas (natural gas or LPG), non-automotive, as well as motors and hydraulic pumps for original equipment manufacturers (machines), in the agricultural, construction, garden, marine and energy (also ...
-
Manufacturerbased in Cadelbosco di Sopra (RE), ITALY
ELECTROIL s.r.l. is a reliable company specialized in design and manufacturing of electronic controllers for asynchronous and permanent magnets brushless motors for industrial and pumps. The company was founded in 2002 by the Eng. Federico Chiussi ...
ELECTROIL - Model IMMP1.1W - FlyVar Pump-inverter System
FlyVAR Pump-Inverter system and integrated expansion vessel offers all the advantages of constant pressure control combined with greater efficiency and special Inverter-Vessel cooling system. 5-way fitting and pressure transducer already mounted ...
CONTACT SUPPLIER -
Manufacturerbased in Colorno, ITALY
We have been operating since 1961 when the founder, Eugenio Zantelli, started the business in Colorno in the province of Parma. He strongly believed that in this region, characterized by great tradition and technical culture, he would have succeeded ...
-
Manufacturerbased in Padova, ITALY
Sorgent.e is an Investment Company that specialises in renewable energy sources and aims to seize the opportunities presented by green energy in Europe and around the world. Sorgent.e pursues a strategy of diversification for investments. In order ...
Generators
STE energy is able to offer its customers the right technological solution with the best performance, product reliability and general cost-efficiency for the solution implemented for electric generators of different types and sizes. Thanks to the ...
CONTACT SUPPLIER -
ManufacturerOffice in PORTO MARGHERA (Ve), ITALY
ATB Riva Calzoni was formed in 2003 by merging the decades-long technical capabilities and the facilities of Acciaieria e Tubificio di Brescia (ATB) and Riva Calzoni Impianti (Riva Calzoni). Alessandro Calzoni, born in Bologna in 1807, was in his ...
Model ATB 500.54 - Wind Turbine Machine
A variable pitch controlled wind turbine with a 54 m rotor. Since installation of the first prototype in 1997, wind turbines with total capacity of over 20 MW have been installed with successful operation in Germany, Austria and Canada. The turbine ...
CONTACT SUPPLIER -
ManufacturerOffice in Caldiero, ITALY
Hydroalp is specialized in the design and the construction of hydropower turbines and operates as an EPC contractor in the construction of technologically advanced hydroelectric power plants. Hydroalp was founded by BMGroup, an industrial group ...
Hydroalp - Francis Turbine
Hydroalp installs Francis turbines for medium head plants from a few tens of meters up to about one hundred meters, with flow rates from a few tens of liters up to a few cubic meters per second. Francis turbines are the most efficient turbines ...
CONTACT SUPPLIER -
ManufacturerOffice in San Martino Buon Albergo, ITALY
Schmack Biogas Srl was born in 2006 as the Italian branch of the former German Company Schmack Biogas AG. In 2018, our company becomes independent and begins to operate worldwide. Since 2020 we are proudly part of PLC SpA ...
-
Manufacturerbased in Arzignano, ITALY
The company was founded in 1891 and nowadays enjoys worldwide brand recognition thanks to its extended sales, distribution and service networks across four continents and two manufacturing facilities, based in Italy and Malaysia, which produce ...
Model C3G - C4G - Motors
An induction machine is capable to work as a motor or as a generator depending on the rotating speed. Below the synchronous speed the machine will act as a motor. At synchronous speed, the line supplies reactive power and machine losses, but no ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you