Based on the ancient design of the Greek scientist Archimedes, but introduced and altered for land reclamation projects in the 17th century, the Archimedes screw pump made its way into the Dutch minds, thanks to engineer Leeghwater. Landustrie did step into this tradition of water technologies and made the LANDY Archimedes screw pump applicable for a wide variety of liquid pumping solutions. ...
Flowing water is a relentless, never ending source of power for pure, clean renewable energy. All you need to benefit from this natural resource is a LANDY hydropower screw system. Landustrie designs, builds and installs highly efficient, cost effective and environmentally beneficial hydropower turbine system solutions which are specifically designed for relatively low head, high flow river ...
In impulse turbines, the working medium has the same static pressure in front of and behind the rotor. The conversion of pressure energy into kinetic energy takes place in the fixed nozzles of the distributor, not at the turbine rotor. This compressed-air driven experimental unit can be used to understand turbines powered by steam or ...
Water turbines are turbomachines utilising water power. The Pelton turbine is a type of impulse turbine; such turbines convert the pressure energy of water into kinetic energy entirely in the distributor. During the conversion, the water jet is accelerated in a nozzle and directed onto the blades of the Pelton wheel tangentially. The water jet is redirected by approximately 180° in the ...
North American Hydraulics, (NAHI, LLC), partnering with Black Bruin, LTD; the Power on Demand Specialists, offering Radial Piston Wheel and Shaft Motors designed for Mobile and Industrial Applications. ...
In reaction turbines, the static pressure of the working medium in front of the rotor is higher than that behind it. In pure reaction turbines with a degree of reaction of one, the entire pressure energy in the rotor is converted to kinetic energy. This compressed-air driven experimental unit can be used to understand turbines powered by steam or ...
Water turbines are turbomachines utilising water power. The Francis turbine is a type of reaction turbine which converts the pressure energy of the water into kinetic energy in the distributor and in the rotor. The water is fed in the distributor by means of a spiral housing. The flowing water is accelerated in the distributor by the adjustable guide vanes and directed onto the blades. The ...
At just 121mm (4.75") diameter and less than 275mm (11") long, T25 delivers 21kW, (27hp) @ 6.2 BAR (90psig) on a 12 nozzle package. T25 redefines robust starting and reliability for small space ...
The (Archimedean) screw Pumps are well-known for their excellent qualities such as the Simple & Rugged design, the high efficiency, the capacity to pump raw water (even when it contains an amount of solids and debris) and their lifetime reliability.Spaans Babcock has a worldwide reputation of being the oldest and the largest manufacturer of Archimedean Screw Pumps with a track-record of more ...
With the introduction of the Spaans Babcock Screw Turbine, a new era has been entered. The Spaans Babcock Screw Turbine is probably the most efficient technology for low head hydropower sites. Unique is the fish friendliness, long lifetime and minimal operating costs. Spaans Babcock offers grid connected, off-grid and hybrid ...
The Griffith Service Vise is a floor-mounted unit designed to hold a variety of tubular components while service work is carried out. The Griffith™ Service Vise work piece rests on a V-shaped tool support plate containing a series of tong dies. Clamping force is provided by a heavy leaf chain that is wrapped over the top of the work piece. When the chain latch is engaged, an air-over ...
The SG Series grapple is by far the most versatile and widely used pieces of mechanical equipment found on UK sites today. Our grapples are designed for use directly in place of the machines own bucket and are powered solely by the bucket linkage, no additional hydraulics are required. A brace arm is fitted to the rear shell and then a mounting bracket is welded to the underside of the machine ...
The world’s first wind/wave generator includes a wind turbine to harness wind energy and a wave turbine system to harness water wave energy and is used offshore to produce renewable power. ...
For use on all types of cranes and derricks. Mack engineered and tested heavy-duty hydraulic cylinders. All components nationally known brands. Pins and shafts are heat-treated steel of adequate size to prevent breakage and promote long service life. Heat-treated alloy steel combines light weight with rugged strength. Radio Remote Controlled ...
Our water turbines for battery charging can generate energy in any pressurized pipe with a circulating flow and a pressure drop. They can be installed for power supply in remote areas with no grid connection, for example in drinking water tanks, in parallel with pressure reducing valves, etc. For more information visit: ...
Our water turbines for grid tied applications can generate energy in any pressurized pipe with a circulating flow and a pressure drop. They can be installed in drinking water tanks, in parallel with pressure reducing valves, in small river dams, etc. For more information visit ...
Highview Power’s CRYOBattery technology makes use of a freely available resource – air – which is cooled and stored as a liquid and then converted back into a pressurized gas which drives turbines to produce electricity. Just as pumped-hydro harnesses the power of water, the CRYOBattery unleashes the power of air. It is the only long-duration energy storage solution available ...
Quality assurance for heat pumps:The heat pump quality seal was introduced by the EHPA in 2009 to create uniform measurable standards in Europe, according to which the quality of the product and service can be assessed. The award in Austria is carried out by the national quality seal commission of Austria under the chairmanship of Prof. Hermann Halozan / Graz University of Technology. Other ...