Only show results available in Massachusetts? Ok

Francis hydro (Francis Hydro Turbines) equipment

  • WKV - Francis Hydro Turbines

    Head range up to more than 300 m, Capacity up to about 20 000 kW, Excellent peak efficiency, High efficiency also at partial water flow down to about 50%, Complete range of specific speeds for runner design allows optimized matching to synchronous speed, Compact design and low maintenance requirements by rigorous selection of best suited materials ...

    By Wasserkraft Volk AG based in Gutach, GERMANY. from Turbines and Power Plants Product line

  • Francis Hydro Turbines

    Since 1904 CKD Blansko has manufactured more than 249 Francis turbines and they operate at 89 sites. Their total output amounts more than 5 334 MW. Francis turbines are delivered with high-quality self-lubricating bearings as standard. These bearings have higher specifications than the original bronze bearings and are moreover environmentally ...

    By CKD Blansko Holding, a.s. based in Blansko, CZECH REPUBLIC.

  • Francis Hydro Turbines

    Unit 1: 0.66 M Francis 2.0 MW / 82.2 M Head / 750 RPM. Unit 2: 0.47 M Francis 1.0 MW / 82.2 M Head / 1000 RPM

    By The James Leffel & Company based in Springfield, OHIO (USA).

  • Francis Hydro Turbines

    We supply Horizontal Francis turbines for heads of up to 300 metres and outputs of up to 10,000 kW. The runner is made of acid-proof stainless steel and comes with a balancing certificate. The spiral-shaped inlet is made of stainless steel or, alternatively, black steel.

    By Energi Teknikk AS based in Dimmelsvik, NORWAY.

  • WWS - Francis Hydro Turbines

    The Francis turbine – also know as “excess pressure turbine” – is usually installed for medium heads of water and constant water quantities. This type of turbine mostly uses a steel spiral turbine, since there is often a tube line leading to the turbine at heads of water over 20m. Further advantages of the compact design of ...

    By WWS Wasserkraft GmbH & Co KG based in Neufelden, AUSTRIA.

  • Rainpower - Francis Hydro Turbines

    Low and medium head 'Storm' Francis turbine | High head 'Hurricane' Francis turbine. For heads between 50 and 600 meters, Francis¬ turbines are most common. In 2008 Rainpower Storm was introduced as a new type of turbine for low and middle head between 50 and 300 meters. This turbine has world class technology. Rainpower has developed and ...

    By Rainpower Norway as based in Kjeller, NORWAY.

  • Gugler - Francis Hydro Turbines

    We supply Francis-turbines up to a 20 MW per unit. For medium head applications with medium flow. Individualised design at state-of-the-art technology provides highest efficiency, longest lifespan and secures extraordinary profitability.

    By GUGLER Water Turbines GmbH based in Goldwörth, AUSTRIA.

  • Siapro - Francis Hydro Turbine

    Francis turbine housing is filled with water, which means that all the impeller blades work the same force. Turbine power depends on the flow and direction of water flow on the impeller blades. To regulate the flow of water a Francis turbine has blades installed in the turbine casing. Blades in the casing are interconnected in a mechanism called ...

    By Siapro d.o.o. based in MOST NA SOČI, SLOVENIA.

  • Kössler - Francis Hydro Turbines

    Our range of Francis turbines includes open flume type turbines for low head, and spiral case turbines in horizontal or vertical designs for medium to high head. The Francis runner is often fitted directly to the generator shaft, which also ensures a compact construction and low maintenance. Francis turbines are characterised by their optimal ...

    By Kössler GmbH & Co KG based in St. Georgen am Steinfeld, AUSTRIA.

  • Francis Hydro Turbines

    Either standardized units for small hydro or tailor-made solutions, VAPTECH is delivering high-quality Francis turbines. VAPTECH’s care for maximum efficiency and resistance to cavitation is guaranteed by flow dynamic analyses and tests from leading European research centers.

    By VAPTECH Ltd based in Sofia, BULGARIA. from Hydro Product line

  • Francis Hydro Turbines

    That of producing energy through water power is a very ancient finding. The Francis turbine was already developed 1849 by James B. Francis and till nowadays it has not been deeply modified.  The efficiency and the functional details turn this overpressure hydraulic turbine into an adjustable and solid energy producer. The Francis turbine is ...

    By Tschurtschenthaler Turbinenbau based in Sesto (BZ), ITALY.

  • Francis Hydro Turbines

    HTE Engineering and its partners have provided hundreds of Francis turbines all over the world, ranging in size from 145 kW to 750 MW.  The Francis turbine is a type of inward-flowing reaction turbine. This turbine is named after James B. Francis (1815 – 1892), an American hydraulic engineer who designed, built, and tested the first of ...

    By HydroTech Engineering, LLC based in Sandy, UTAH (USA). from Turbines Product line

  • Gilkes - Francis Hydro Turbines

    Gilkes Francis Turbines are available as either horizontal or vertical units. The water enters the spiral, or scroll case, and is directed by a series of moveable guide vanes, or wicket gates, to the turbine runner. As the water passes through the runner it rotates and the water pressure drops. Water is then discharged through a draft tube into ...

    By Gilbert Gilkes & Gordon Ltd based in Kendal, UNITED KINGDOM. from Hydropower Product line

  • Francis Hydro Turbines

    Output range 100 - 3.000 kW.  For head from 10 to 300m. Guide vanes and runner made of stainless steel. Special bypass structure for closed piping systems. Highest efficiency at constant flow . The runner is located directly on the generator shaft (alternatively with a coupling and own bearings of the turbine shaft). Spiral casing, welded in ...

    By CINK Hydro - Energy k. s. based in Sadov, CZECH REPUBLIC. from Hydro Turbines Product line

  • ADDNEW - Model turbine - Francis Hydro Turbine

    They operate in a head range of 10 meters to 300 meters and are primarily used for electrical power production. The power output ranges from 160KW to 20000KW, Runner diameters are between 0.35 and 2.5 meters. The speed range of the turbine is from 150 to 1000 rpm.* Excellent peak efficiency.* High efficiency also at partial water flow down to ...

    By Addnew Hydropower Limited based in Changsha, CHINA.

  • CHC - Small Francis Hydro Turbines

    Francis turbines have been around for 170 years, and have more installations than any other type of turbine in the world today. Numerous designs offering variations in runner height, crown and band diameters, number of buckets, etc make Francis turbines a versatile option for a wide range of hydro projects with heads as low as 12 meters to as high ...

    By Canadian Hydro Components Ltd. (CHC) based in Almonte, ONTARIO (CANADA).

  • Model 0,1 - 5MW - Francis Hydro Turbines

    Ganz has two standard design Francis turbine groups, both  having horizontal shaft arrangements. In the first group, the runner is mounted directly on the free end of the generator shaft, thus the weight and thrust of the runner are absorbed by the generator bearing. In case, the unit must be fitted with ...

    By Ganz Engineering and Energy Production Machinery LLC based in Budapest, HUNGARY. from Hydro Turbines Product line

  • GE - Francis Hydro Turbine

    With about 60% of the global hydropower capacity in the world, Francis turbines are the most widely used type of hydro turbine. GE has continuously invested in R&D to increase turbine efficiency and developed specific product enhancements to improve machine performance. GE has successfully completed numerous installations of Francis turbines ...

    By GE Renewable Energy based in Paris, FRANCE. from Large Hydropower Turbines Product line

  • Hydrolink - Model HHF - Spiral Francis Turbines

    Standard runner diameters 300 – 1000 mm. Runner cast of special alloy stainless steel DIN 17445-84 with high mechanical chemical, anti-corrosive nad especially cavitation resistance. Automatically regulated guide vanes, made from stainless steel, moving in bronze suspensions. Pulls, cranks and pins made from stainless steel DIN 17455-99. ...

    By Hydrolink, s.r.o. based in Roztoky, CZECH REPUBLIC. from Francis Hydro Turbines Product line

  • Francis Hydro Turbines

    Francis turbines generally are the most efficient solution for heads ranging from 40 to 600 meters.The runner design can be adapted to get the highest level of efficiency in its whole range of application.Francis turbines are very robust and able to sustain the high mechanical stress resulting from high heads.Alstom has successfully completed ...

    By Alstom based in Saint-Ouen, FRANCE. from Hydro Turbines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you