Francis Hydro Turbines Equipment For Hydro Energy
-
Manufactured by Heidemann Wasserkraftanlagenbased in GERMANY
Building a hydropower plant, even small hydro plants, in almost all cases is a project which requires a larger investment. Again the omnipresent question of feasibility often rules out minor projects even if the realization would be a success for the area. Not the production of electricity only but as well operating pumping stations and water treatment plants is a major purpose for ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
The key Double Francis turbine components includes Runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, among ...
-
Manufactured by F.Nencini Srlbased in ITALY
They allow a very high upstream pressure loss, without any risk of critical phenomena (cavitation, vibration, noise) even with little downstream head pressure. They are also used as synchronous discharge tool for turbine plants (mainly Pelton or Francis turbines) because they are able to work in high pressure condition. The discharge is carried out under high head loss across of the valve. ...
-
Manufactured by Hydrohrom, s.r.o.based in CZECH REPUBLIC
Regulation of the runner with runner blades fixed. Is the most frequently used machine for newly constructed small head hydropower plants. It is also used in the renovation of older plants originally equipped with vertical Francis turbines, which often achieves a better flow usage. The advantage is the low cost of the equipment. Installation is ether with a drive belt or directly connected to the ...
-
Manufactured by ESPE Groupbased in ITALY
The hydraulic turbine is a machine that turns hydraulic energy into mechanical energy, with a conversion yield of approximately 90%. This mechanical energy is then converted into electrical energy by means of an alternator. ESPE turbines are directly engineered by our R&D Department. ESPE manages, checks and supervises the entire production process to provide highly customised and high yield- ...
-
Manufactured by Marelli Motori S.p.Abased in ITALY
An induction machine is capable to work as a motor or as a generator depending on the rotating speed. Below the synchronous speed the machine will act as a motor. At synchronous speed, the line supplies reactive power and machine losses, but no torque or power is generated. Above the synchronous speed the machine act as a generator. Induction generators works in the stable region between the ...
-
Manufactured by StrojÃrny Brno, a.s.based in CZECH REPUBLIC
Francis turbine is applied for middle/ high Heads and moderate/high Discharges We design our Francis turbines with adjustable Guide Vanes during operation ensuring optimisation of efficiency at varying ...
-
Manufactured by Tschurtschenthaler Turbinenbaubased in ITALY
1913 the Austrian engineer Viktor Kaplan developed the Kaplan turbine, according to the basics of the Francis turbine. This turbine is excellent for small fall heights (from 1 to 15 metres) and for big water flow rates. A typical application example are the river hydraulic power ...
-
Manufactured by Reivax North America, Inc.based in CANADA
The Integrated Voltage and Speed Regulation RTVX Power Systems were developed to integrate the voltage regulation system and speed governor system, optimizing the signals and resources. The RTVX Power performs all supervision, control, and automation functions related to the generating unit, and can be fully customized meet the most demanding projects. We can supply the complete system or ...
-
Manufactured by GUGLER Water Turbines GmbHbased in AUSTRIA
We supply Francis-turbines up to a 20 MW per unit. For medium head applications with medium flow. Individualised design at state-of-the-art technology provides highest efficiency, longest lifespan and secures extraordinary ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis turbine could be designed for the hydropower resource with various heads ranged from 10m to 500m . The water pass the runner vanes gathered in radiation and flow out in axial finally. It is recommended for the plant with flexible heads and ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
Country of origin : China. Brand : Electway. Model : MHL series. Certification : 3C. Warranty : 1 year. Packing : wooden. Delivery time : 30 days. Payment terms : T/T. Loading port : Guangzhou. MOQ : 1 set. 30-200kW micro francis ...
-
Manufactured by Wasserkraft Volk AGbased in GERMANY
It combines the advantages of the Pelton and Francis turbines. Designed for water heads between 50 and 300 m, with very good partial-load efficiency, high floating-debris tolerance and power outputs of up to 10 MW; it is suitable for challenging sites with variable water ...
-
Manufactured by Mavel a.s.based in CZECH REPUBLIC
Runner Diameters 1000 mm to 2500 mm. Head Range Up to 300 meters (1000 feet). Flow Range Up to 35 cms (1236 cfs). Power Output Up to 30 MW. Transmission Runner Assembled to Generator or Turbine ...
-
Manufactured by Potencia Industrialbased in MEXICO
Potencia Industrial designs and manufactures hydroelectric generators up to 30 MW, vertical and horizontal, suitable for Kaplan, Pelton and Francis turbines, for high or low speeds, with overspeed capacity up to over 200% nominal with high axial thrust. In the last 5 years we supplied over 60 MW of hydroelectric generators, installed at various hydro sites around the globe. We know that high ...
-
Manufactured by Chengdu Forster Technology Co., Ltd.based in CHINA
Forster Francis turbine is the ideal choice for medium head and large flow. Forster Francis turbines are available in varying configurations, horizontal or vertical, with flexibility in design to ensure best efficiency and reliability of operation under the most extreme conditions. Forster Francis turbines are characterized by incomparable longevity, durability, reliability, and robustness. ...
-
Manufactured by DynaVec ASbased in NORWAY
Innovative solution with exchangeable vanes allowing for fully hard-coated runners (HVOF), even for small sizes. The DynaVec Francis runner consists of separate crown, band and the optimal number of vanes that are bolted together instead of welded as for a traditional runner. This gives the opportunity to a fully hard coating of the wetted surfaces for even small and medium size turbines. All ...
-
Manufactured by Hydro Power Plant SAS (HPP)based in FRANCE
Designed for Heads from 20 m to 400 m, HPP Francis runners can achieve more than 94% ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Design for low head and large water flow hydropower station.Under the same water head, its specific speed is higher compared with the Francis turbine. Application water head is about 3-80m. Axial-flow turbine runner for Feng Huang ...
-
Manufactured by Galliford Trybased in UNITED KINGDOM
A centrifugal pump, fitted with an impeller of the correct geometry, can operate in reverse rotation mode as a turbine. It works on the same principle as a Francis Turbine. The energy is recovered from the pressure differential (head), whilst the water flow is passed back in to the existing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you