Hydro Generators Manufacturers, Suppliers & Companies (Hydro Energy) In USA
-
Manufacturerbased in CALIFORNIA (USA)
4sphere is a Los Angeles based Clean Tech Turbine company that has created a revolutionary spherically turbine design that is silent, has zero vibrations, has no RPM limitation, does not cause mechanical failures, has no fish or bird kill, is ...
Hydro-Generation Turbine
Ideal for Rivers, Oceans, Open Water Ways, and Bio-fuel Plants; Scalable; Inexpensive; Long Service Life; No Fish Kill; Does not need a Dam; Low maintenance; Easy ...
CONTACT SUPPLIER -
Manufacturerbased in Henrico, VIRGINIA (USA)
In 1965 Power Systems & Controls Inc (PS&C) was established in response to a need by Caterpillar to build a series of machines that would bridge the 8 second gap of time from Utility outage to the Diesel Generator being synchronized on-line. Based ...
-
Manufacturerbased in Mansfield, OHIO (USA)
Ideal Electric Company, formerly Hyundai Ideal Electric Co., is a pioneering, American owned manufacturer of high-power, specialty electric motors, generators, condensers, switchgear, power systems and controls with capabilities ranging from ...
Ideal - Hydro Electric Generators
IDEAL ELECTRIC is the US leader in small hydroelectric experience, with over 250 projects and 800 MW installed. Exclusive US single source company – capable of producing both generators and switchgear and allowing for sole sourcing of a ...
CONTACT SUPPLIER -
Manufacturerbased in Republic, WASHINGTON (USA)
Cross Flow Turbine Generator Unlike most water turbines which have axial or radial flows, in a cross-flow turbine, water passes through the turbine transversely or across the turbine blades. As with a water wheel, the water is admitted at the ...
Scott Hydroelectric - Hydro-Turbine Charge Controller for Battery Charging
Turbine with charge controller for battery charging – Inverter not included – Option #2. This is the basic control package for charging 12, 24, of 48 volt batteries in an off-grid power system. This includes the hydro-turbine Morning ...
CONTACT SUPPLIER -
Manufacturerbased in Sandy, UTAH (USA)
HTE Engineering and its partners are known for supplying hydropower equipment and providing engineering and construction support for hydropower projects across North America. We have manufactured and installed more than 1,000 hydro turbine and hydro ...
HydroTech - Hydro Turbine Control Equipment
The control equipment is vital to the performance of the hydro turbine/generator ...
CONTACT SUPPLIER -
Engineering service providerbased in Sumter, SOUTH CAROLINA (USA)
Hydro Consulting & Maintenance Services, Inc. has accumulated over 550 years of experience in the installation, repair and maintenance of Hydroelectric turbines and generators. We provide services to utility companies and manufacturers of hydro ...
Consulting Services
Turbine, generator and due diligence studies to provide recommendations for upgrades and repairs, special testing, assist in writing specifications, evaluation of bids, system audits, and establishing preventative maintenance ...
CONTACT SUPPLIER -
Manufacturerbased in Grants Pass, OREGON (USA)
We at Alternative Power and Machine, Home of APMHYDRO, are dedicated to the growth of the renewable energy industry and are committed to providing our customers with the highest quality products and competent technical support combined with the ...
Model 1032 PM - An Entry Level Permanent Magnet Alternator
An entry level permanent magnet alternator. These are single phase and have about the same efficiency as the large frame Ford alternators that have been used for years. Very low maintenance and easy to use and install. They perform best for 12 and ...
CONTACT SUPPLIER -
Manufacturerbased in Castle Rock, COLORADO (USA)
ClearPower’s innovative technology harvests energy from water intensive customers, generating renewable electricity from the water already flowing through their pipelines for intake, waste, treatment and discharge. The design of the ClearPower ...
-
Service providerbased in Greenville, SOUTH CAROLINA (USA)
Integrated Power Services, or IPS, is the nation’s leading independent provider of repair and maintenance services for electric motors, generators and mechanical power transmission components. We provide electrical motor repair and replacement coast ...
-
Manufacturerbased in Santa Monica, CALIFORNIA (USA)
Innotec Power is a leading manufacturer of Permanent Magnet Alternators, Motors and Control Systems. The company invests heavily in research and design to innovate reliable solutions for power generation, transmission and control in the industrial, ...
Model 72 Volt - Brushless DC Motors
Innotec designs and manufactures 72V motors (72V BLDC, 72V PMAC). The 72V motors begin sub 1kW and go up to 60 kW. The motors are used as auxiliary motors and drive motors for mobile equipment and stationary equipment. They can be coupled with ...
CONTACT SUPPLIER -
Manufacturerbased in Danbury, CONNECTICUT (USA)
Manitou Systems Inc. is a global supplier of high power radio frequency (RF) generators, high voltage DC plasma generators , microwave power system products and, plasma processing tools specifically designed for industrial and scientific ...
Eliminator - RF Blocking Filters for DC Sputtering & High Voltage Power Supplies
The Eliminator Filter module shown to the left includes type UHF I/O connectors. Alternate connector types are available. The enclosure size for 3 amp models is 4.5″ (114.5mm) long X 2.5″ (64mm) wide X 2.17″ (55.1mm) high. The I/O ...
CONTACT SUPPLIER -
Manufacturerbased in Keokuk, ILLINOIS (USA)
AMJET Turbine Systems, LLC (ATS) has utilized composite marine water jet technology to create a new low head hydro turbine/generator. Low head hydropower (axial flow) is the inverse of a marine water jet. ATS has a sister company, American Hydro Jet ...
Amjet - Model ATS-63 series - Hydro Turbine/Generator
The ATS-63 series hydro turbine/generator combines the turbine and generator functions in to a single housing, thereby creating an in-line unit that can be suspended in a conduit or placed on a bulkhead. The unit is made of high-strength, engineered ...
CONTACT SUPPLIER -
Manufacturerbased in Gardena, CALIFORNIA (USA)
We design and manufacture power and cooling systems for targeted market applications. In particular, we offer DC power systems, DC hybrid power systems, and DC solar hybrid power systems for telecommunications, military, renewable energy, marine, ...
Polar Power - Model 6200 Series - DC Alternators
Polar Power first tested its DC Alternator using its Permanent Magnet Hybrid Homopolar (PMHH) technology in 1992. Since then numerous organizations have performed extensive testing on Polar’s generators, including the US Military. Polar ...
CONTACT SUPPLIER -
Manufacturerbased in Kaysville, UTAH (USA)
My name is Joe and what began as a quest to build a power source for a remote farmhouse became a hobby and obsession. My unique knowledge and background spending summers on a farm, working at a water treatment plant and my education and career in ...
-
Manufacturerbased in Mansfield, CONNECTICUT (USA)
NuSTREEM produces modular, standard, digital, continuously optimizing, and easily maintainable hydropower equipment. NuSTREEM’s product is based on technological evolutions that make a significant difference in the performance of a long-accepted ...
-
Manufacturerbased in Chelmsford, MASSACHUSETTS (USA)
FDE Hydro is advancing the North American water infrastructure industry by developing innovative technologies for the next-generation hydro run of the river dams, modular prestress concrete power house facilities, pump storage civil structures, ...
-
ManufacturerOffice in Cambridge, MASSACHUSETTS (USA)
Zurich Instruments is a test and measurement company headquartered in Zurich, Switzerland, developing and selling measurement instruments along with premium customer support in key markets around the ...
-
Manufacturerbased in Columbus, OHIO (USA)
Few non-OEM companies have serviced the Power Generation Industry for as long as National Electric Coil. In continuous operation since 1917, NEC grew up with the industry, initially servicing the mines in Bluefield, West Virginia and evolving in its ...
Engineering Service
Today budgets are tightly crafted and expenses closely monitored, so our clients depend on us to lower operating costs and to improve performance, efficiency and reliability with solutions that align with their immediate and long-term business ...
CONTACT SUPPLIER -
ManufacturerOffice in Chesapeake, VIRGINIA (USA)
In-Place Machining Company designs and develops specialized machine tool systems, and provides precision field machining services as well as optical and laser alignment and measurement to a wide range of industries including Nuclear, Fossil, Hydro ...
-
ManufacturerDistributor in St. Charles, MISSOURI (USA)
Established in 1976, Ophir Optronics is a global leader in precision infrared optics, photonics instrumentation and 3D non-contact measurement equipment. The company develops, manufactures and markets top quality products that are based on the most ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you