Only show results in Connecticut? Ok

Hydropower control equipment for Hydro Energy

  • Premium

    Protection of Hydropower Equipments

    Variable frequency drives (VFDs) at hydroelectric power plants often control critical systems such as irrigation, water levels, fish management devices or flood gate control systems. In many cases the VFDs may already be equipped with manufacturer-installed line side surge protective devices (SPDs) to protect against spikes generated by switching ...

    By Raycap based in Maroussi Athens, GREECE. from Energy/Utilities - Renewable Energy Product line

  • Premium

    Hilliard BrakeBoss - Model BBH3 - Advanced Brake Control System

    The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - BrakeBoss Product line

  • Premium

    GPE - Model 19140/13120 - Hydraulic Power Supply and Controller

    Ten Gallon Reservoir Eliminates the Need for Heat Exchanger, Pressure, Filter, and Level / Temperature Switches, Meets JIC Standards, 3.7 GPM, 100 to 300 PSI.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Combustion Controls Product line

  • Premium

    Hilliard BrakeBoss - Model BBH2 - Brake Control System

    The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - BrakeBoss Product line

  • Leitwind - Model LTW86 1.000 kW - Wind Turbine

    Hub Height: 80 / 90 / 97,5 / 100 m. Rated Power: 1.000 kW. Tower: steel. Cut-in wind speed: 3 m/s. Cut-out wind speed: 25 m/s. Yaw control system: Active, electrical. Wind Class: IIIA/IIIB.

    By Leitwind SPA based in Vipiteno (BZ), ITALY.

  • Leitwind - Model LTW101 2.000 / 2.500 / 3.000 kW - Wind Turbine

    Hub Height: 80-93,5 / 80-93,5 / 93,5-143 m. Rated Power: 2.000 / 2.500 / 3.000 kW. Tower: steel. Cut-in wind speed: 3 m/s. Cut-out wind speed: 25 m/s. Yaw control system: Active, electrical. Wind Class: IIIA+ / IIIA+ / IIA/IIIA+.

    By Leitwind SPA based in Vipiteno (BZ), ITALY.

  • Juli - Side Stacker

    The side cantilever stacker is widely used in cement, building materials, coal, electric power, metallurgy, steel, chemical and other industries. It adopts herringbone stacking process to achieve pre-homogenization of auxiliary materials for limestone, coal, iron ore and cement plants, with the stacking capacity of 100-4000t/h. The equipment has ...

    By Shenyang Juli Engineering Co., Ltd based in Shenyang City, CHINA. from Stacker Reclaimer Product line

  • Rolin - Bale Accumulator

    The Rolin bale accumulator improves haying efficiency for farmers and ranchers. The bale accumulator allows them to group their bales on the field for easy and quick pick up. Less fuel is used and with fuel prices sky high now it can save hundreds of dollars. Everyone is always in a hurry these days so saving time is also important to farmers and ...

    By Rolin Manufacturing based in New Salem, NORTH DAKOTA (USA).

  • Diesel Generators

    Hydro Gen are also specialists in all aspects of diesel generator solutions including sales, installation, maintenance, control system upgrade and associated power switching equipment, Hydro-Gen’s Head Office is based in the North West covering all of the UK. Hydro-Gen are unique in the area of specialist plant equipment and maintenance ...

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Douce-Hydro - Hydraulic Power Units & Control Panels

    Douce-Hydro provides complete hydraulic systems, including hydraulic cylinders, hydraulic power units and control panels to fit your specific requirements and ensure optimalperformance efficiency, reliability and long life span.

    By Douce-Hydro SAS based in Albert cedex, FRANCE. from Other Products Product line

  • Custom Fabrication

    Sun Coast Hydraulic Electric Manufacturing Incorporated, located in Jacksonville, Florida, is a fully integrated manufacturer of hydraulic power units and electrical control systems.

    By Sun Coast Hydraulic Electric Manufacturing based in Jacksonville, FLORIDA (USA). from Hydraulic Product line

  • GVF - Roto Spray

    285° rotation lets you take advantage of the wind conditions at all times. A baffled air head with four air outlets enables you to get even coverage throughout the spray pattern.

    By Gillison`s Variety Fabrication Inc. based in Benzonia, MICHIGAN (USA). from GVF Equipment Product line

  • SUREnergy - Model 40kW - Wind Turbine

    Small Industrial Sites, Small Communities and Municipalities Schools Commercial Farms or Remote Village Wind-Diesel Power Systems. The hub contains the device for varying the pitch of the blades. Contrary to most other small wind energy converters, the 40kW features the pitch control system of the blades giving the advantages of: Automatic ...

    By SUREnergy based in Sandusky, OHIO (USA).

  • N-Blosi - Model EIN - Moving Machines

    Diesel motor Perkins 403D-07 HP17 diesel. Traction Hydrostatic on 2 or 4 wheels. 2 gears + neutral in central posotion - electrical control from control panel. with hydraulic power steering on the front wheels. Steering with hydraulic power steering on the front wheels

    By N. Blosi based in Russi (Ravenna), ITALY. from Moving Machines Product line

  • Solar Boost - Model 3024(D)iL - 40A/30A, 12V/24 - Solar Charge Controller with MPPT

    The perfect controller for a variety of applications, including marine, RV, industrial, off-grid, and PV street lighting. SB3024iL model without display, SB3024DiL model with display.

    By Sunforge LLC based in Vista, CALIFORNIA (USA). from Blue Sky Energy Products Product line

  • STI - Model CMV - Control Drive Large Enclosed Actuator

    CMV actuator is able to control final elements of modern power stations (dampers, hydraulic converters, etc.) using high power actuators to develop torque up to 20.000 Nm. In this series, the housing provides a double function of protection and bearing frame. This system assures maximum stiffness without making use of additional supporting ...

    By IMI STI based in Levate, ITALY. from Control Drive Actuators Product line

  • EMG - Model HST - Hydraulic Control System

    A HST hydraulic control system is used wherever installation space is at a minimum. It can even be used in close proximity to the hydraulic cylinder. The HST system is supplied by the central hydraulic system or a hydraulic power pack (HA). The main component of the hydraulic control system is the EMG servo valve (SV).

    By EMG Automation GmbH based in Wenden, GERMANY. from Automation - Strip Guiding Systems - Actuators Product line

  • Model 2.5 & 3 Ton - Single Axle 6x12 Tilt Trailer

    Transporting scissor lifts, forklifts, small rollers, and other small industrial equipment requires a special trailer with a low load angle, maneuverability, and ease of operation. The CAM Superline 6x12 Tilt Trailers are designed to meet this need. The Single Axle Tilt trailer is available in 2.5 and 3 ton capacities.

    By CAM Superline Inc based in Waynesboro, PENNSYLVANIA (USA). from Tilt Trailers Product line

  • JPS - Rotary Actuator

    When developing the R5500 sawing unit, JPS have also developed a completely new hydraulic rotary actuator that replaces the traditional saw bar cylinder. The actuator consists of only three parts and therefore offers maximum reliability while the maintenance requirements are minimal. The unique design is the central part of the R5500 concept as it ...

    By JPS Teknik AB based in Färila, SWEDEN.

  • ANew - Model M1 - Medium Vertical Wind Turbine

    ANew-M1 is a medium-size vertical axis wind turbine or VAWT. Rated at 200 kilowatts, ANew-M1 offers ample power generation for large farms, remote resorts, or hotels. It is also a very suitable option for small off-grid communities, or as a VAWT powerplant for a community-owned wind farm. It was specifically designed to be most effective at low ...

    By ANew Institute based in Kraków, POLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you