We couldn't find any hydropower engineering equipment suppliers or service providers located in Africa
Here is a list of equipment results with suppliers serving Africa
Hydropower Engineering Equipment For Hydro Energy Available In Africa
-
Manufactured by MDB Srlbased in ITALY
Vacuum chamber for cranes. Power: Hydraulic Oil. Engine: Hydraulic. Vacuum pump capacity: 10m3/h. Weight: 80 Kg. Max Lift.CAP.: 500 Kg. Working Pressure: 150 Bar. Max Working Pressure: 180 Bar. The lifting capacity depends upon the suction cap. Max lifting CAP. 500 ...
-
Manufactured by GOES GmbHbased in GERMANY
Different oil and gas plays require different HP-ratings and often are located in rough environment. Different countries require different truck, trailer or skid mounted configurations to optimize transportation costs and to comply with road regulations. GOES GmbH is offering standard frac pump designs from 1.000 HP to 3.000 HP – depending on customer needs. ...
-
Manufactured by EEW Holding GmbH & Co. KGbased in GERMANY
From single bending to multidimensional bending - EEW is in the position to shape special components with plate thicknesses of up to 300 mm (11.8”) in accordance with customer requirements. At the same time, our own in-house tool construction enables us to realise short-term deliveries and to find cost-saving ...
-
Manufactured by General Mechanical Works Pvt. Ltd.based in INDIA
GMW, a heavy engineering company, is one of the pioneers in the field of hydro mechanical equipments and have designed, manufactured, supplied & erected the following equipments, which are rendering trouble free services to the full satisfaction of our customers. The design and manufacture of Hydel Gates is to be done by our specialized branch of Engineering and calls for a combination of ...
-
Manufactured by Kuenz GmbHbased in AUSTRIA
An advanced design guarantees trouble-free operation in pumped storage power plants. Draft tube gates and bottom outlets are designed with utmost accuracy during manufacturing and assembly. Gates by Kuenz are designed as sliding gates or fixed wheel construction. Our gates are engineered and manufactured by Kuenz including hydraulics and electrics. ...
-
Manufactured by ESPE Groupbased in ITALY
ESPE has been designing and building hydroelectric plants throughout Italy and Romania with the purpose of producing clean energy, without affecting the surrounding area from an environmental and landscape point of view. The activity of ESPE does not end with the construction of energy plants, but also includes the development of innovative technological systems aimed at optimising the yield of ...
-
Manufactured by Challenger Groupbased in UNITED KINGDOM
Hydraulic power units are individually designed to meet your requirements upto 45kW capacity. Electric Motor, Diesel Engine or Petrol Engine driven hydraulic power packs can be supplied complete with electrical control panels. Specially protected and zoned electric motors and panels can be supplied for hydraulic power units and equipment to be operated in potentially explosive ...
-
Manufactured by Grenevia SAbased in POLAND
FAMUR is an experienced and recognized manufacturer of power hydraulics. Experience in designing and production of hydraulic legs and rams, combined with a wide range of manufactured control system elements, allow us to offer comprehensive drive systems for machines intended for many industries. We carry out standard projects based on proven solutions of modern technology, as well as special ...
-
Manufactured by Reivax North America, Inc.based in CANADA
The Integrated Voltage and Speed Regulation RTVX Power Systems were developed to integrate the voltage regulation system and speed governor system, optimizing the signals and resources. The RTVX Power performs all supervision, control, and automation functions related to the generating unit, and can be fully customized meet the most demanding projects. We can supply the complete system or ...
-
Manufactured by NuSTREEM LLCbased in USA
The NuCONTAINER design takes advantage of industry-standard ISO shipping containers, as well as our standard NuTURBINE, to provide a modular, easily-integrated system intended to minimize installation and hydropower site costs. ...
-
Manufactured by Bevi ABbased in SWEDEN
BEVI's control and test equipment for hydropower and industry use can be built up of everything from various operator panels, image building and trend display programs with control and alarm via web, GSM, 3G, GPRS or ...
-
Manufactured by Inject-O-Meter Mfg. Co., Inc.based in USA
The hydraulic powered pump is designed for use with T&L center pivots(r). Comes with all controls needed to operate the pump with hydraulic ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
ydroman™ TQSY Hydraulic Slurry Pump with Diesel Power Pack is specifically designed for handling slurries with a high content of abrasive solids. The hydraulic submersible pumps have been extremely successful for clients operating in specialized sectors who face severe conditions and solve very difficult applications. The TQSY hydraulic slurry pumps are positioned as submersible dredge pumps for ...
-
Manufactured by S.W.H. GROUP SEbased in CZECH REPUBLIC
Small hydro power plant is technically exploitable potential, kinetic or thermal energy of all waters on earth. This is immediately after the second most used biomass renewable energy source. Most are nowadays used in hydraulic power conversion to electricity. Small hydro power is the designation for hydroelectric power plants with installed capacity up to 10 MW, including (NB. The European ...
-
Manufactured by Imesa S.A.based in SPAIN
For Imesa, grilles are one of the most important elements of hydroelectric power stations. Imesa designs, manufactures and assembles grilles for fine and gross solids with no limit on size for hydroelectric power stations (hydroelectric, WWTPs, DWTPs and CCTPSs) to any quality standard, always in accordance with the exact calculations depending on the load of water in each power ...
-
Manufactured by Sollant Groupbased in CHINA
Product Name: rotary screw air compressor, Fixed Speed Screw Air compressor. Gas Type: Air. Power: 5.5kw – 355kw. Air outlet diameter: DN20 – DN65. Driven method: Direct driven. Configuration: Stationary. Lubrication Style: Lubricated. Weight: 250-2500kg. Warranty: 2 years. Certification: CE/ASME/ISO. Color: Optional & customization. Local Service Location: Philippines, Mexico, ...
-
Manufactured by Obermeyer Hydro, Inc.based in USA
Obermeyer Hydro designs and manufactures patented gates and bulkheads that incorporate arrays of compact submersible turbine generator sets. These systems comprise complete hydropower plants that may be installed in existing water control structures without cofferdam construction, without excavation work nor associated geologic risk, and without expensive new concrete structures. Examples of ...
-
Manufactured by Airmo Inc. Pressure Technologiesbased in USA
The SelectForm Model 400 Hydraulic Power Unit is designed specifically to meet the power source needs for Airmo end forming tools. The Hydraulic Power Unit (HPU) is equipped with valves and circuitry to reliably operate hand-held and modular end forming tools. The standard Model 400 Hydraulic Power Unit is supplied with an integral oil to air heat exchanger for cooling the hydraulic fluid to ...
-
Manufactured by NuSTREEM LLCbased in USA
We knew that there were steps to take to modernize hydroelectric systems beyond combination, or CAM, curves. We wanted to find a more efficient generation system that would increase return on investment at hydropower sites and make small hydro development economically feasible. The NuTECH controller is this next step forward in automated control systems it uses new-to-industry control algorithms ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
Since the early 20th century, ATB Riva Calzoni started to develop its knowhow in the design, supply, installation and commissioning of Gates, covering all types and sizes. Furthermore, the company promoted the more valuable hydraulic control systems for large radial gates as an alternative to traditional electromechanical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you