We couldn't find any hydropower infrastructure equipment suppliers or service providers located in Australasia
Here is a list of equipment results with suppliers serving Australasia
Hydropower Infrastructure Equipment For Hydro Energy Available In Australasia
-
Manufactured by Stern Hidráulica S.Abased in SPAIN
In the department of hydraulic power units in STERN we design and manufacture customized hydraulic power units, tables of valves, special manifoldss, benches of accumulator, adjusting to customer requirements and needs, depending on the different types sectors. To do this, we have a design software 2D / 3D, which allows us to develop projects faster, guaranteed and reliability. As a reference ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Coanda Power Screens are modular intake structures including screens, accelerators, support frames, and controls. No secondary desilter is required. The modules are simply placed, leveled, and set into a ...
-
Manufactured by Natel Energy, Inc.based in USA
The Fully Flooded hydroEngine model is rated up to 500 kW of output, has competitive savings in cost for both the turbine (less expensive manufacturing) and civil works (reduced ...
-
Manufactured by Thordon Bearings Inc.based in CANADA
ThorPlas-Blue is a homogeneous, self-lubricating polymer bearing capable of withstanding operating pressures up to 45 MPa (6,527 psi) installed in a full-form, interference-fit configuration. It is an engineered thermoplastic offering very low wear in non-abrasive environments with several tests showing low friction and low ...
-
Manufactured by NuSTREEM LLCbased in USA
The NuBRAKE™ is a gas over hydraulic braking system that effectively brakes (closes the wicket gates) upon hydroelectric power emergency situations or in controlled water power system closures. Closure timing is programmable, either manually using a settable valve or automatically through an optional automated valve with communication to the local NuTECH Controller. Timing ...
-
Manufactured by Poclain Hydraulicsbased in SLOVENIA
VDF free-wheeling valve allows to disengage the hydraulic motor by allowing the pistons to return in cylinder-blocks and the motor to turn in freewheeling mode. It prevents contacts of camring and pistons at high ...
-
Manufactured by Modular Pontoon Systems BVbased in NETHERLANDS
Pulling force at first layer: 15.0 ton; Holding force at first layer: 22.5 ton; Wire length / diameter: 400m / 28mm; Speed at first layer: 10 ...
-
Manufactured by Tenmat ltdbased in UNITED KINGDOM
FEROGLIDE bearings consist of a woven PTFE fabric with strengthening fibres applied to a metal backing. FEROGLIDE bearings are typically used in valves, hydro power equipment, lifting equipment and many other applications. Valve manufacturers value the FEROGLIDE stainless steel and Inconel 625 grades due to their high load carrying capability and chemical ...
-
Manufactured by Wagstaff Applied Technologies - a division of Wagstaff, Inc.based in USA
Wagstaff Applied Technologies provides new and reconditioned wicket gates manufactured to customer specifications. For reconditioned wicket gates, Wagstaff AT performs welding operations per AWS or ASME codes, using an established suite of welding procedures. Wicket Gate machining operations take place primarily on a Geminis GT-5 CNC Lathe, along with Nomura Horizontal Boring Machines. Wagstaff ...
-
Manufactured by Strojírny Brno, a.s.based in CZECH REPUBLIC
We design and manufacture Hydro-mechanical Equipment to provide proper and reliable operation of water turbines and hydro power plants: intake trash racks, trash-rake machines with chain or hydraulic drives, gates for intake, flushing sluice or dam level control (radial segment gate), weir flaps, inlet and bottom outlet ...
-
Manufactured by ZF Off-Highway Solutions Minnesota Inc., formerly MICObased in USA
MICO Modulating Hydraulic Power Brake Valves provide directional control of brake system pressure. They also provide the operator with a 'pedal feel' proportional to brake system pressure. these valves are designed for use with vehicles jthat are equipped with other hydraulic power devices. This feature eliminates the need for a separate power brake unit or separate hydraulic fluid system. There ...
-
Manufactured by Natel Energy, Inc.based in USA
The Free Jet hydroEngine model is rated up to rated 50-1400 kW and does not need a draft ...
-
Manufactured by Thordon Bearings Inc.based in CANADA
Homogenous Thordon HPSXL incorporates friction and wear reducing additives throughout its entire molecular structure ensuring consistent performance in limited motion applications and high resistance to shock loading and vibration. It is for high pressure applications up to 55 MPa (8000 psi) dynamic or 70 MPa (10,000 psi) static peak. Its friction coefficient is typically 0.06-0.12 ...
-
Manufactured by Chengdu Forster Technology Co., Ltd.based in CHINA
Forster Francis turbine is the ideal choice for medium head and large flow. Forster Francis turbines are available in varying configurations, horizontal or vertical, with flexibility in design to ensure best efficiency and reliability of operation under the most extreme conditions. Forster Francis turbines are characterized by incomparable longevity, durability, reliability, and robustness. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you