Hydropower Infrastructure Equipment For Hydro Energy
-
Manufactured by ADENCObased in TURKEY
The most popular and effective way for the Coanda Intake Screen, also called hydropower screen, is using it for the Hydroelectric Plants – Hydropower energy. Coanda Water Screen prevents harmful materials in the intake process and provides clean water. Thus, turbine blades in hydropower plants can operate for longer without being damaged. Thus, the Coanda Intake Screen operates long years ...
-
Manufactured by Vandezande bvbabased in BELGIUM
Screw pums are mainly used to pump large amounts of liquids to a relatively limited higher level. Screw pumps are mainly used for controlling water levels in canals and rivers but they are also used for transferring contaminated water in water treatment installations (return activated sludge pump, influent ...
-
Manufactured by Stern Hidráulica S.Abased in SPAIN
In the department of hydraulic power units in STERN we design and manufacture customized hydraulic power units, tables of valves, special manifoldss, benches of accumulator, adjusting to customer requirements and needs, depending on the different types sectors. To do this, we have a design software 2D / 3D, which allows us to develop projects faster, guaranteed and reliability. As a reference ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Coanda Power Screens are modular intake structures including screens, accelerators, support frames, and controls. No secondary desilter is required. The modules are simply placed, leveled, and set into a ...
-
Manufactured by Rpmtech Co., Ltd.based in SOUTH KOREA
RPMTECH's DHP Power Cylinders are Electro-Hydraulic Power Cylinders built for damper valves. The DHP Power Cylinder is a compact, all-in-one solution that is capable of advanced control modes and supports various types of installation for maximum versatility. The actuators do not require a gearbox (the cause of many breakages) allowing for direct and efficient delivery of power for reliable ...
-
Manufactured by Natel Energy, Inc.based in USA
The Fully Flooded hydroEngine model is rated up to 500 kW of output, has competitive savings in cost for both the turbine (less expensive manufacturing) and civil works (reduced ...
-
Manufactured by Natel Energy, Inc.based in USA
The Free Jet hydroEngine model is rated up to rated 50-1400 kW and does not need a draft ...
-
Manufactured by NuSTREEM LLCbased in USA
The NuBRAKE™ is a gas over hydraulic braking system that effectively brakes (closes the wicket gates) upon hydroelectric power emergency situations or in controlled water power system closures. Closure timing is programmable, either manually using a settable valve or automatically through an optional automated valve with communication to the local NuTECH Controller. Timing ...
-
Manufactured by Thordon Bearings Inc.based in CANADA
ThorPlas-Blue is a homogeneous, self-lubricating polymer bearing capable of withstanding operating pressures up to 45 MPa (6,527 psi) installed in a full-form, interference-fit configuration. It is an engineered thermoplastic offering very low wear in non-abrasive environments with several tests showing low friction and low ...
-
Manufactured by Modular Pontoon Systems BVbased in NETHERLANDS
Pulling force at first layer: 15.0 ton; Holding force at first layer: 22.5 ton; Wire length / diameter: 400m / 28mm; Speed at first layer: 10 ...
-
Manufactured by Strojírny Brno, a.s.based in CZECH REPUBLIC
We design and manufacture Hydro-mechanical Equipment to provide proper and reliable operation of water turbines and hydro power plants: intake trash racks, trash-rake machines with chain or hydraulic drives, gates for intake, flushing sluice or dam level control (radial segment gate), weir flaps, inlet and bottom outlet ...
-
Manufactured by Poclain Hydraulicsbased in SLOVENIA
VDF free-wheeling valve allows to disengage the hydraulic motor by allowing the pistons to return in cylinder-blocks and the motor to turn in freewheeling mode. It prevents contacts of camring and pistons at high ...
-
Manufactured by Tenmat ltdbased in UNITED KINGDOM
FEROGLIDE bearings consist of a woven PTFE fabric with strengthening fibres applied to a metal backing. FEROGLIDE bearings are typically used in valves, hydro power equipment, lifting equipment and many other applications. Valve manufacturers value the FEROGLIDE stainless steel and Inconel 625 grades due to their high load carrying capability and chemical ...
-
Manufactured by My-D Han-D Mfg. Co. Inc.based in USA
The untt is mounted completely on the exterior of the truck to allow for full tarping of the load. The 12-volt control switch that controls the hydraulic solenoid switch is mounted on the end of the telescoping ...
-
Manufactured by ZF Off-Highway Solutions Minnesota Inc., formerly MICObased in USA
MICO Modulating Hydraulic Power Brake Valves provide directional control of brake system pressure. They also provide the operator with a 'pedal feel' proportional to brake system pressure. these valves are designed for use with vehicles jthat are equipped with other hydraulic power devices. This feature eliminates the need for a separate power brake unit or separate hydraulic fluid system. There ...
-
Manufactured by Hydroscreen Co. LLCbased in USA
Debris and coarse sediment wreck havoc on micro hydro systems. The smaller orifices in these turbines can easily become plugged and the jets, which direct water to a pelton wheel or impeller, eroded and worn by any sediment in the water. Our micro hydro diversion screens can help protect your investment, reduce maintenance costs, and insure continuous turbine operation. If you have ever walked up ...
-
Manufactured by Wagstaff Applied Technologies - a division of Wagstaff, Inc.based in USA
Wagstaff Applied Technologies provides new and reconditioned wicket gates manufactured to customer specifications. For reconditioned wicket gates, Wagstaff AT performs welding operations per AWS or ASME codes, using an established suite of welding procedures. Wicket Gate machining operations take place primarily on a Geminis GT-5 CNC Lathe, along with Nomura Horizontal Boring Machines. Wagstaff ...
-
Manufactured by Thordon Bearings Inc.based in CANADA
Homogenous Thordon HPSXL incorporates friction and wear reducing additives throughout its entire molecular structure ensuring consistent performance in limited motion applications and high resistance to shock loading and vibration. It is for high pressure applications up to 55 MPa (8000 psi) dynamic or 70 MPa (10,000 psi) static peak. Its friction coefficient is typically 0.06-0.12 ...
-
Manufactured by Chengdu Forster Technology Co., Ltd.based in CHINA
Forster Francis turbine is the ideal choice for medium head and large flow. Forster Francis turbines are available in varying configurations, horizontal or vertical, with flexibility in design to ensure best efficiency and reliability of operation under the most extreme conditions. Forster Francis turbines are characterized by incomparable longevity, durability, reliability, and robustness. ...
-
Manufactured by Gates Corporationbased in USA
Gates offers an extensive portfolio of low, medium and high pressure hydraulic tubing assemblies to support a variety of customer Fluid Power applications including Agriculture, Construction, and Material handling equipment, Truck and Bus, Wind Turbines, Lawn and Garden, and Engines. We have the unique capability to fully process hydraulic tube assemblies in-house from start to finish. This ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you