We couldn't find any hydropower operations equipment suppliers or service providers located in Africa
Here is a list of equipment results with suppliers serving Africa
Hydropower Operations Equipment For Hydro Energy Available In Africa
-
Manufactured by Thordon Bearings Inc.based in CANADA
ThorPlas-Blue is a homogeneous, self-lubricating polymer bearing capable of withstanding operating pressures up to 45 MPa (6,527 psi) installed in a full-form, interference-fit configuration. It is an engineered thermoplastic offering very low wear in non-abrasive environments with several tests showing low friction and low ...
-
Manufactured by Heidemann Wasserkraftanlagenbased in GERMANY
After World War II when the energy demand in Germany rose constantly the nuclear-energy-focused policies of the larger energy concerns were concentrated on eliminating small and smallest competitors. In addition in the 1950s and 1960s many mills and factories that had operated own hydropower stations were closed down or did not carry on operation because the output was too low and the energy ...
-
Manufactured by FAB 3R Inc.based in CANADA
Hydropower equipment technology has become the forefront of the energy conversion industry. Hydraulic turbine and shaft machining has taken on the role of energy conduction for many modern homes and business buildings. Canadian manufacturers have made modifying and maintaining these priceless machines a top professional priority. Hydropower equipment facilities and operations rely upon the ...
-
Manufactured by Norvento EnerxÃabased in SPAIN
With presence in various international markets, Norvento currently has more than 12.3 MVA of hydroelectric power generation plants in operation, construction and development, both in Spain and in other ...
-
Manufactured by Etaeval GmbHbased in SWITZERLAND
"etahydro" is the brand of our solution for continuous efficiency monitoring in smart hydropower plants. Smart hydropower plants provide intelligent decision support. Based on continuous acquisition of relevant data, the condition of a hydropower plant or of individual hydro machines can be recorded (condition monitoring). Analysis of this input allows to anticipate inspection decisions ...
-
based in USA
In our waste-to-energy plants, there is no need to pre-treat the waste. Besides saving time, eliminating pre-treating lowers both your operation and maintenance costs, saving approximately 15 €, or $20, per metric ton of waste. This means that a small-medium sized plant can save more than 1 million Euro each year and larger plants even more. Proper feeding of waste onto the grate needs to be ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
Country of origin: China. Brand: Electway. Model: SP series. Certification: CCC. Warranty: 1 year. Packing: wooden. Delivery time: 30 days. Payment terms: T/T. Loading port: Guangzhou. MOQ: 1 set. cross-flow turbine, doubleshot turbine, Michell-Banki turbine, inclined-jet ...
-
Manufactured by HydroQuest SASbased in FRANCE
River current turbine with one level containing two turbines. Minimum water head: 2.2 m. Nominal power output: 40 kW with current flow speed of 3.1 ...
-
Manufactured by Burndy - Hubbell Industrial Controls, Inc.based in USA
The unique C-Head tool allows users to simply scoop and cut without theneed to open and close a latch, making cutting easier in a variety ofapplications. The PATHCC10 and RHCC10 Series of cutters are available with four(4) individually designed blades enabling users to optimize the cutting of theintended cable type with ease and effectiveness. A variety of options areoffered including ordering ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
Country of origin : China. Brand : Electway. Model : XJA series. Certification : IEC. Warranty : 1 year. Packing : wooden. Delivery time : 60 days. Payment terms : T/T. Loading port : Guangzhou. MOQ : 1 set. turgo impulse turbine, turgo turbine, inclined-jet ...
-
Manufactured by Ganz Engineering and Energetics-machinery Manufacturer Ltdbased in HUNGARY
Makes it difficult to utilize remote but economically valuable areas, because of the costs and time-consume to build up an electricity network. Ganz EEM Llc., by its mini-hydro power station, offers a simple, fast and cost-effective solution to attach to the regional business the remote areas, rich in hydro power, but they are without built up electrical network, or has electrical network which ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
It is widely used in hydro power stations with the head of 6--30 meters. It is suitable for hydro power resource of low water head and high flow, there are two types: fixed blade. and adjustable blade type. The fixed blade type is suitable for hydropower station with small capacity, the range is between 70. to percent, the adjustable blade type is larger with range between 30 to 100 percent. We ...
-
Manufactured by Spagnolo Engineeringbased in AUSTRALIA
The linkage mounted Hydraulic Power Pack allows operation of all the functions of the Pruning machinery. The Hydraulic power packs ensure adequate hydraulic flow capacity. Spagnolo Hydraulic Power Packs allow ease of use and responsiveness to cutters and cylinder functions by the full electric over hydraulic controls of the power ...
-
Manufactured by Tschurtschenthaler Turbinenbaubased in ITALY
Hydroelectric power stations for small hydropower plant is nowadays the ideal way for many companies and private persons for an autarchic energy supply. We have been specialising for years in this environmentally friendly sustainable energy recovery and we fulfill with our hydraulic turbines the most unusual customer requests. In our South Tyrolean family company everything is produced ...
-
Manufactured by Ganz Engineering and Energetics-machinery Manufacturer Ltdbased in HUNGARY
The turbines are characterized by a simple, robust design that ensures reliable operation with minimal maintenance. The welded steel-structured spiral housing and the stay ring form a compact unit with the suction-pressure connections and the support legs, and the lifting tabs. This design provides a circular symmetrical flow to the ...
-
Manufactured by Adams Armaturen GmbHbased in GERMANY
At high operating pressures our spherical valves are recommended for use as safety and check valves. They are either welded or forged in high-quality steel. Their two sealing systems make it possible to carry out maintenance work without having to empty the pressure ...
-
Manufactured by Atlas Manufacturing Ltd.based in CANADA
Gone are the days of time consuming vibrating out of suborn H-piles during the reclamation process or worse yet, frustrating stuck pile which ultimately is un-reclaimable and requires ...
-
Manufactured by Etaeval GmbHbased in SWITZERLAND
Transient operation is inherent to the operation of hydroelectric power plants and water supply systems, since machines are started, stopped or work at time varying operating ...
-
Manufactured by NuSTREEM LLCbased in USA
We knew that there were steps to take to modernize hydroelectric systems beyond combination, or CAM, curves. We wanted to find a more efficient generation system that would increase return on investment at hydropower sites and make small hydro development economically feasible. The NuTECH controller is this next step forward in automated control systems it uses new-to-industry control algorithms ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
Country of origin: China. Brand: Electway. Model: GD series. Certification: IEC. Warranty: 1 year. Packing: wooden. Delivery time: 30 days. Payment terms: T/T. Loading port: Guangzhou. MOQ: 1. 100-2000kW tubular turbine,turgo ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you