Only show results available in Connecticut? Ok

Hydropower Reservoir equipment for Hydro Energy

  • Premium

    Landustrie Landy - Hydropower Screw Turbines

    The new range of the Landustrie screw pump covers the hydropower screw turbines. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 meter.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Hydropower Product line

  • ANDRITZ - Hydromatrix

    Hydromatrix is a new innovative concept of hydraulic energy generation, combining the advantages of proven technology and low cost installation, which is easily integrated into existing dam structures or weirs. Projects that are not economically feasible with conventional turbine-generator designs can now be developed profitably by using the ...

    By ANDRITZ AG based in Graz, AUSTRIA. from HYDRO Product line

  • Getai - Model 2 - Francis Turbine

    Francis turbine could be designed for the hydropower resource with various heads ranged from 10m to 500m . The water pass the runner vanes gathered in radiation and flow out in axial finally. It is recommended for the plant with flexible heads and outputs.

    By Shenyang Getai Hydropower Equipment Co.,Ltd based in Yuhong District, Shenyang, CHINA. from Francis Turbine Product line

  • Eaton - Model XL Series - Custom Hydraulic Cylinders

    Eaton’s XL series hydraulic cylinders have been deployed on applications exposed to some of the world’s most brutal conditions, including offshore oil exploration, mining, mineral processing, and hydropower dams. Our large selection of specialty coatings combined with cylinder manufacturing capability up to 22 meter stroke lengths ...

    By Eaton Corporation based in Cleveland, OHIO (USA). from Hydraulics - Cylinders Product line

  • Bardella - Hydropower Plant

    At the end of the 1940s Bardella had already started the manufacture of the first hydromechanical equipment for the energy sector, including dams and river locks within the country. Since then it has established and consolidated its privileged position as a supplier of this type of equipment. Investments in research and technological development ...

    By Bardella SA Indústrias Mecânicas based in Guarulhos - SP, BRAZIL.

  • Wicket Gates

    Wagstaff Applied Technologies provides new and reconditioned wicket gates manufactured to customer specifications.  For reconditioned wicket gates, Wagstaff AT performs welding operations per AWS or ASME codes, using an established suite of welding procedures. Wicket Gate machining operations take place primarily on a Geminis GT-5 CNC Lathe, ...

    By Wagstaff Applied Technologies - a division of Wagstaff, Inc. based in Spokane Valley, WASHINGTON (USA).

  • Tidal Energy Technologies

    The technology required to convert tidal range energy into electricity is very similar to the technology used in traditional hydroelectric power plants. It requires building up a reservoir of certain head that will be continuously filled by turbine pumps operated by movement of large mass of water during the rising and ebbing tide. The water in ...

    By Hiro Energy-Tech Limited based in Mumbai, INDIA.

  • 4navitas - Energy Storage System

    Energy storage is the key to integrating renewable energy into the grid. It is essential to guaranteeing energy stability and reliability to families, communities and companies in the future. Variable renewable energy resources form a challenge for both power generators and grid operators. While the first ideally seeks to provide power at peak ...

    By 4navitas Limited based in Blackpool, UNITED KINGDOM.

  • Electway - Model Mini XJ Series - Micro Turgo Turbine Complete Set (1-50kW)

    It is widely used in hydro power stations with the head of 3--180 meters. With inclined jet turbine, the water flow output from nozzle flows along a certain angle of plane of rotation of the running wheel instead of flowing along the tangent of the turning wheel, and the water flow goes inside the blades from one side and goes out form blades from ...

    By Guangzhou Electway Technology Co., Ltd. based in Guangzhou, CHINA. from Hydro Turbine Product line

  • Rickly - Model Basics - Small Hydro Plants

    Small HydroPower generation projects can be defined as a generating capacity of up to 10 Megawatts (mw) which further sub-divided into mini Hydro which is typically defined as up to 1 mw (1000 Kilowatts-kw) and a smaller micro Hydro up to 100kw. As a practical example micro hydro projects will typically supply enough power for from 5-100 homes, ...

    By Rickly Hydro based in Columbus, OHIO (USA). from System Product line

  • Obermeyer Hydro - Hydro Turbines

    Obermeyer Hydro designs and manufactures patented gates and bulkheads that incorporate arrays of compact submersible turbine generator sets. These systems comprise complete hydropower plants that may be installed in existing water control structures without cofferdam construction, without excavation work nor associated geologic risk, and without ...

    By Obermeyer Hydro, Inc. based in Fort Collins, COLORADO (USA).

  • Power Units

    Phelps Industries has been manufacturing industrial power units for 25 years. Our power units are designed to fit any specific need. Systems can be designed for simple actuation or multiple operations. Standard units are fabricated from 1/4' A-36 steel plate, and are internally sandblasted. Each unit has a bolted flange removable type lid. JIC ...

    By Phelps Industries, Inc. based in Little Rock, ARKANSAS (USA).

  • Acciona - Hydroelectric Power Technologies

    Hydroelectric power has been one of ACCIONA Energy’s activities since the company’s early days. It was initially part of a process of modernization and valorization of small hydro plants, and later developed into the construction of new plants. We therefore have considerable experience in this technology, both in terms of evaluating ...

    By ACCIONA Energy based in Alcobendas, SPAIN.

  • JSC ELEM - Hydro Plants

    The water energy presents one of the first energies used by the humans in its history. Since the 4th century before Christ has started the utilization of the water energy in purpose of moving the mill wheel, and later with the progress of the science and the technique, starts the construction of the first hydro power plants (year 1882, on the ...

    By JSC ELEM (Macedonian power plants) based in Skopje, MACEDONIA.

  • Small Hydropower Plant Construction

    Power station construction procedure starts at the moment of the first contact with the investor. Our specialists help customers at the stage of the location of power station, suggesting draft solutions of the problems related to hydro engineering part, water flow, mechanical and electric part. Afterwards we prepare the design of the entire power ...

    By ZRE Gdansk S.A. based in Gdansk, POLAND. from Water Power Industry Product line

  • EGP - Hydroelectric Power Services

    The generation of hydroelectric energy occupies the first place at a global level. In Europe the hydroelectric potential is now being entirely utilised. This is why, Enel Green Power is now concentrating on run-of-river hydro power, a type of system that, despite having a limited unit power, can give a significant contribution to the demand of ...

    By Enel Green Power SpA based in Rome, ITALY.

  • Gamesa Electric - Electrical Generators

    The hydroelectric sector is characterised by a high level of customisation, as each power station must be optimised according to the hydroelectric resource available and the configuration of the installation.

    By Gamesa Electric based in Zamudio, SPAIN. from Hydroelectric Energy Product line

  • Rickly - Model Propel - Hydro System

    Around the U.S. there are approximately 75,000 dams with hydro-power potential. The PROPEL-Hydro System simplifies the process of adding power to these sites by adding innovative equipment, effective design processes and disciplined approaches to execution.

    By Rickly Hydro based in Columbus, OHIO (USA). from System Product line

  • Getai - Model 1 - Impulse Pelton Turbine

    Impulse turbine shall be considered in priority for the hydropower resource with high head ranged from 100m to 1700m . It works by transfering the kinetic energy of jet flow to the rotation of runner with the outstanding characteristics in the ways of compact structure, satisfied performance and relaxable output.

    By Shenyang Getai Hydropower Equipment Co.,Ltd based in Yuhong District, Shenyang, CHINA. from Pelton Turbine Product line

  • Getai - Model 1 - Francis Turbine

    Francis turbine could be designed for the hydropower resource with various heads ranged from 10m to 500m . The water pass the runner vanes gathered in radiation and flow out in axial finally. It is recommended for the plant with flexible heads and outputs.

    By Shenyang Getai Hydropower Equipment Co.,Ltd based in Yuhong District, Shenyang, CHINA. from Francis Turbine Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you