Showing results for: Hydro Turbine (Hydropower Turbines) Equipment
-
Manufactured by Strojírny Brno, a.s.based in CZECH REPUBLIC
Francis turbine is applied for middle/ high Heads and moderate/high Discharges We design our Francis turbines with adjustable Guide Vanes during operation ensuring optimisation of efficiency at varying ...
-
Manufactured by Strojírny Brno, a.s.based in CZECH REPUBLIC
Pelton turbine is non-pressure turbine suitable for very high heads and low discharge. Water is supplied by nozzles equipped with adjustable needles and deflectors to the runner ...
-
Manufactured by Strojírny Brno, a.s.based in CZECH REPUBLIC
Kaplan turbine is applied for Low Heads and High Discharge. We design our Kaplan turbines with adjustable Guide Vanes and Runner Blades during operation ensuring optimisation of efficiency at varying head and ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Pelton turbines are suitable for applications with variable flows and do not require a flywheel or quick-opening bypass valve in the event of grid loss. However, they must be exhausted into the atmosphere and are typically more costly than reaction ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Reaction turbines are a cost-effective option for applications with a constant flow and a need for positive outlet pressure, like force mains. These highly efficient turbines can be paired with a flywheel or quick-opening bypass valve to address variable pressure concerns. Compared to Pelton turbines, reaction turbines are a more ...
-
Manufactured by Siapro d.o.o.based in SLOVENIA
Kaplan water turbine is axial overpressure water turbine, which has a radial inflow, outflow, however axial. It is used for high flow rates and low lows. For a wide range of flow rate is achieved a very good yields, even more than 92%. More than 20 years of experience means the accumulation of experience and knowledge that ...
-
Manufactured by GUGLER Water Turbines GmbHbased in AUSTRIA
We supply Pelton-Turbines up to a 20 MW per unit. Pelton-Turbines are used for higher heads and for smaller flows. Individualised design at state-of-the-art technology provides highest efficiency, longest lifespan and secures extraordinary ...
-
Manufactured by GUGLER Water Turbines GmbHbased in AUSTRIA
Mikro-Turbines from 5 to 50 ...
-
Manufactured by GUGLER Water Turbines GmbHbased in AUSTRIA
We supply Kaplan-Turbines up to 20 MW per unit. The best solution for low pressures with high flow. Individualised design at state-of-the-art technology provides highest efficiency, longest lifespan and secures extraordinary ...
-
Manufactured by Siapro d.o.o.based in SLOVENIA
Siapro has newly developed and specially designed the flow regulation of a standard Banki Water Turbine to increase its overall efficiency. A patented invention that takes a standard, reliable and proven technology to a new ...
-
Manufactured by GUGLER Water Turbines GmbHbased in AUSTRIA
We supply Francis-turbines up to a 20 MW per unit. For medium head applications with medium flow. Individualised design at state-of-the-art technology provides highest efficiency, longest lifespan and secures extraordinary ...
-
Manufactured by IREM SpAbased in ITALY
Ecowatt Hydro Pelton turbines are water turbines suitable for heads from 20 m to 550 m and the effective flow rates ranging from 0.5 l/s to 350 l/s. The buckets are made of precision cast stainless steel. All Pelton turbines are fitted with six nozzles controlled by special flow regulation valves, which help the efficiency of the ...
-
Manufactured by Tecnoturbines S.Lbased in SPAIN
Water turbine designed and developed to generate energy from water resources through the use of natural water pressure jumps, up to 10 m. The innovative electrical power system allows you to adapt the turning speed to changes in flow, for maximum efficiency without the need for adjustable blades. The Hydro Low Head turbine was developed ...
-
Manufactured by Chongqing Lisong Electromechanical Equipment Co., Ltd.based in CHINA
Francis turbine. For water head. Output: ...
-
Manufactured by Suneco Micro Hydro Powerbased in CHINA
Francis turbine is a reaction turbine,is the most common water turbine in use today. Applicable water head 30m~700m. Specific speed:50~300rpm. The largest capacity of our single Francis turbine unit is 6000KW. Head range up to more than 300 m. Capacity up to about 20 000 kW. Excellent peak efficiency. High efficiency also ...
-
Manufactured by Chengdu Forster Technology Co., Ltd.based in CHINA
Francis turbine has the advantages of compact structure, high efficiency and can adapt to a wide range of water head of turbine type. It is one of the widely used ar 20KW mini hydro turbine-generator ound the world; When the water flow through the turbine wheel, it enters to radial, axial flow, so it is also ...
-
Manufactured by Strojírny Brno, a.s.based in CZECH REPUBLIC
We design and manufacture Hydro-mechanical Equipment to provide proper and reliable operation of water turbines and hydro power plants: intake trash racks, trash-rake machines with chain or hydraulic drives, gates for intake, flushing sluice or dam level control (radial segment gate), weir flaps, inlet and bottom outlet ...
-
Manufactured by Siapro d.o.o.based in SLOVENIA
Francis turbine housing is filled with water, which means that all the impeller blades work the same force. Turbine power depends on the flow and direction of water flow on the impeller blades. To regulate the flow of water a Francis turbine has blades installed in the turbine casing. Blades in the casing are interconnected in a ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
It is widely used in hydro power stations with the head of 3--180 meters. With inclined jet turbine, the water flow output from nozzle flows along a certain angle of plane of rotation of the running wheel instead of flowing along the tangent of the turning wheel, and the water flow goes inside the blades from one side and goes out form blades ...
-
Manufactured by Sundermann Water Power Ltdbased in AUSTRALIA
The Sundermann Turbine is a submerged water turbine which drives a generator. It is specifically designed to maximise operational efficiency in slow to medium speed water flows of 6-12 knots. The Sundermann Turbine is suitable for installations where water flow is either in a single direction, such as rivers or ocean currents, or in tidal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you