Hydropower Turbines Equipment For Hydro Energy In USA
-
PremiumManufactured by Cornell Pump LLCbased in USA
Reaction turbines are a cost-effective option for applications with a constant flow and a need for positive outlet pressure, like force mains. These highly efficient turbines can be paired with a flywheel or quick-opening bypass valve to address variable pressure concerns. Compared to Pelton turbines, reaction turbines are a more affordable ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Pelton turbines are suitable for applications with variable flows and do not require a flywheel or quick-opening bypass valve in the event of grid loss. However, they must be exhausted into the atmosphere and are typically more costly than reaction ...
-
Manufactured by HydroTech Engineering, LLCbased in USA
HTE Engineering and its partners have had the opportunity to provide Pelton turbines all over the world, with sizes ranging from 260 kW to 500 ...
-
Manufactured by Pecos Wind Powerbased in USA
The PW85 is an 85kW distributed wind turbine for behind-the-meter (onsite) and distribution-level (community-serving or community wind) power generation. Our design leverages an induction generator, a gearbox, and an extensive portfolio of commercially-off-the-shelf components for high reliability and serviceability. Pecos’ cost advantage is founded on two key advantages, optimization ...
-
Manufactured by Mavel a.s.based in CZECH REPUBLIC
Runner Diameters 1050 mm to 5500 mm. Number of Runner Blades 3 or 4. Head Range 1.5 to 12 meters (5 to 39.5 feet). Flow Range 15 to 150 cms (530 to 5340 cfs). Power Output 400 kW to 8 MW. Transmission Belt Drive or Parallel ...
-
Manufactured by Tidal Electric Inc.based in USA
Offshore tidal power generation (“tidal lagoons”) is a new approach to tidal power conversion that resolves the environmental and economic problems of the familiar “tidal barrage” technology. Tidal lagoons use a rubble mound impoundment structure and low-head hydroelectric generating equipment situated a mile or more offshore in a high tidal range area. Shallow tidal flats ...
-
Distributed by DERP Technologies, LLCbased in USA
DERP Technologies, LLC systems, products and services help bridge the gap between today’s legacy grid and tomorrow’s smart grid. DERPTECH is focusing on designing interconnection devices and business models that bring more clean distributed electrical power into the grid at the utility local distribution network level and provide energy assurance systems through microgrids serving ...
-
Manufactured by Nautilus LLCbased in USA
The T Ultra Low Head turbine (T-ULH) is the most powerful open flume turbine built by Nautilus. This unregulated design produces from 500 watts to 3,300 watts with a head range from 1m to 3.7m. Often two or three units are installed to match streamflow variation or the T-ULH is installed in combination with the Regulated CMC. For large open flume environments, where it is not possible to drain ...
-
Manufactured by HydroTech Engineering, LLCbased in USA
HTE Engineering and its manufacturing partners have been designing, manufacturing, and providing hydro generators worldwide for over 50 years. Our engineering design team has the technology complete with turbine/generator modeling capabilities. Our team’s experience enables us to supply generators that meet each project’s specific ...
-
Manufactured by WWS Wasserkraft GmbHbased in AUSTRIA
The Francis turbine – also know as “excess pressure turbine” – is usually installed for medium heads of water and constant water quantities. This type of turbine mostly uses a steel spiral turbine, since there is often a tube line leading to the turbine at heads of water over 20m. Further advantages of the compact design of the spiral turbine are much lower construction ...
-
Manufactured by HydroTech Engineering, LLCbased in USA
The cross-flow turbine is a type of impulse turbine. The design of this particular turbine was initially developed by Anthony Michell, an Austrian Engineer, in the early 1900’s. The idea was further developed by Donát Bánki, a Hungarian engineer, and even later it was improved upon again by Fritz Ossberger, a German ...
-
Manufactured by FDE Hydrobased in USA
FDE Hydro has developed a technology, called The French Dam, which is considered by civil engineers and hydro industry experts as a disruptive technology since it changes the project financial dynamics, reducing major risk to all Stakeholders and gives the development team a much faster ...
-
Manufactured by LANXESS Deutschland GmbHbased in GERMANY
Liquid ashless antioxidant for use in oils and greases of various types. It may be used in industrial lubricants, including compressor, hydraulic, turbine, gas engine and circulating oils. May be used as an ashless antioxidant in all types of crankcase ...
-
Manufactured by HydroTech Engineering, LLCbased in USA
HTE Engineering and its partners have provided hundreds of Francis turbines all over the world, ranging in size from 145 kW to 750 MW. The Francis turbine is a type of inward-flowing reaction turbine. This turbine is named after James B. Francis (1815 – 1892), an American hydraulic engineer who designed, built, and tested the first of these types of ...
-
Manufactured by Brüel & Kjær Vibrobased in GERMANY
What makes VC-8000 stand out? Better technology, better reliability, and better value. This is why we garnered Frost & Sullivan’s 2014 Customer Value Leadership Award! VC-8000 can provide custom designed systems for continuous machinery monitoring that fit your specific needs. We can assist you with every type of machine – pumps, fans, blowers, steam and gas turbines, hydro turbines, ...
-
Manufactured by Obermeyer Hydro, Inc.based in USA
Obermeyer Hydro designs and manufactures patented gates and bulkheads that incorporate arrays of compact submersible turbine generator sets. These systems comprise complete hydropower plants that may be installed in existing water control structures without cofferdam construction, without excavation work nor associated geologic risk, and without expensive new concrete structures. Examples of ...
-
Manufactured by WWS Wasserkraft GmbHbased in AUSTRIA
This type of turbine is primarily suitable for low pressure areas and large quantities of water. The head of water (1m to 40m) determines the number of blades on the rotor (3 to 6 blades). WWS supplies Kaplan turbines with vertical design with concrete or steel spirals as well as tube turbines – individual according to the requirements of your power plant. If possible, direct drive for the ...
-
Manufactured by Nautilus LLCbased in USA
The regulated CMC Ultra Low Head turbine (CMC-ULH) operates in a similar power range as the 660-ULH in an open flume and produces up to 1500 watts. The CMC offers better part gate regulation and efficiency than the other cylinder gate Nautilus ...
-
Manufactured by Mavel a.s.based in CZECH REPUBLIC
Runner Diameters 1050 mm to 2500 mm. Number of Runner Blades 3 or 4. Head Range 1.5 to 12 meters (5 to 39.5 feet). Flow Range 5 to 45 cms (180 to 1590 cfs). Power Output 100 kW to 3 MW. Transmission Direct Drive, Belt Drive or Bevel ...
-
Manufactured by Gilbert Gilkes & Gordon Ltdbased in UNITED KINGDOM
Gilkes Francis Turbines are available as either horizontal or vertical units. The water enters the spiral, or scroll case, and is directed by a series of moveable guide vanes, or wicket gates, to the turbine runner. As the water passes through the runner it rotates and the water pressure drops. Water is then discharged through a draft tube into the tailrace. Flow is controlled by opening or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you