Hydropower Turbines Equipment For Hydro Energy
-
PremiumManufactured by Cornell Pump LLCbased in USA
Reaction turbines are a cost-effective option for applications with a constant flow and a need for positive outlet pressure, like force mains. These highly efficient turbines can be paired with a flywheel or quick-opening bypass valve to address variable pressure concerns. Compared to Pelton turbines, reaction turbines are a more affordable ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Pelton turbines are suitable for applications with variable flows and do not require a flywheel or quick-opening bypass valve in the event of grid loss. However, they must be exhausted into the atmosphere and are typically more costly than reaction ...
-
Manufactured by Mhylab Mini-Hydraulics Laboratorybased in SWITZERLAND
The diagonal turbine, just like the Francis, covers the range of medium heads (from 25 to 100 meters). With regards to efficiency, and thanks to their adjustable blades, Diagonal turbines are more tolerant than Francis turbines to discharge and head variations. They comprise 8, 10 or 12 inclined and adjustable blades. Mhylab has developed and successfully tested the 8- and 12- blades turbines, ...
-
Manufactured by WWS Wasserkraft GmbHbased in AUSTRIA
This turbine is mostly suitable for great heads of water (100m up to over 1,000m) and small water quantities. The number of nozzles (between 1 and 4) is determined by the available quantity of water and its fluctuations. The advantage of this turbine is that each single nozzle can be regulated separately if large fluctuations of water occur. The horizontal or vertical design is adjusted to the ...
-
Manufactured by Smart Energy Corporationbased in TAIWAN
Permanent magnet Alternator from 500W to 30 Kw. RPM 600/650/700/800/1000 for option Voltage, frequency and RPM customize is acceptable Application: wind turbine, hydro turbine, Automatically machine... Taiwan technology, main advantages are Lightweight and high level of protection ...
-
Manufactured by Aviation Power Control Co., Ltd. (APC)based in CHINA
Adopt the most advanced and efficient technology, and wind turbine power generation capacity has been increased to more than 3 times compared to the traditional type. The mudel is safe, low ...
-
Manufactured by enkotherm GmbHbased in GERMANY
Hot water application. Turbine: Capstone CR800. Thermal output: 810 kW. Dimensions: 560 x 180 x 300 cm. Weight: 4400 ...
-
Manufactured by DLLD Power Limitedbased in CHINA
XJ18-0.75DCT4 is an AC direct system consisting of a turbine-generator unit producing AC power which is used as needed. That is, it is fed directly to the appliances. No need for a battery and inverter, XJ18-0.75DCT4 offers a complete water-to-wire system with an integral Turgo turbine, generator, and valve flow control. Designed to deliver ready-to-use 115V/230V VAC power, it employs a ...
-
Manufactured by CKD Blansko Holding, a.s.based in CZECH REPUBLIC
Since 1904 CKD Blansko has manufactured more than 249 Francis turbines and they operate at 89 sites. Their total output amounts more than 5 334 MW. Francis turbines are delivered with high-quality self-lubricating bearings as standard. These bearings have higher specifications than the original bronze bearings and are moreover environmentally – friendly. Vertical as well as horizontal types ...
-
Manufactured by Vandezande bvbabased in BELGIUM
Screw pums are mainly used to pump large amounts of liquids to a relatively limited higher level. Screw pumps are mainly used for controlling water levels in canals and rivers but they are also used for transferring contaminated water in water treatment installations (return activated sludge pump, influent ...
-
Manufactured by Siapro d.o.o.based in SLOVENIA
Turbines can be installed horizontal or vertical. Stream of water that flows from the nozzle come with high speed tangential to the turbine blades, which are welded two parts in the form of single or double dipper. The amount of water that flows into the turbine blades can be controlled. Doing so we are changing the flow of water. Pelton turbines may attain up to 250mW of power, the efficiency of ...
-
Manufactured by WWS Wasserkraft GmbHbased in AUSTRIA
The Francis turbine – also know as “excess pressure turbine” – is usually installed for medium heads of water and constant water quantities. This type of turbine mostly uses a steel spiral turbine, since there is often a tube line leading to the turbine at heads of water over 20m. Further advantages of the compact design of the spiral turbine are much lower construction ...
-
Manufactured by Hidropower d.o.o.based in SLOVENIA
High peak efficiency Francis turbines for low head and spiral case turbines for medium to high head can be provided ...
-
Manufactured by Canada Metal North America (CMNA)based in CANADA
Canada Metal supplies a complete range of lead and tin-based Babbitt, including our trade-mark Harris Heavy Pressure, ideal for slower speed work and less heavily loaded bearings. Depending on a variety of factors, including surface speed of the shaft, load-bearing and cooling facilities, we will help you to select the Babbitt metal that is custom fit to your requirements. Babbitts available ...
-
Manufactured by VAPTECH Ltdbased in BULGARIA
The axial turbines are designed for projects with low and very low heads with a strong flow variation. VAPTECH offers mainly the classic vertical shaft Kaplan turbine with 3 to 6 runner blades and with double regulation. For runner diameters up to 1400 mm we use a steel spiral casing and for bigger runner diameters we recommend a concrete spiral casing. Our solution and advice is for a direct ...
-
Manufactured by Chinayard Co.,LTDbased in CHINA
This GD horizontal series of hydro turbine consist of the GD series of turbine and the Permanent Magnet generator, which includes single or three phases generator which power output is better from 3KW to 500KW.The user can chose the type as per your the amount of coulomb,the flows and the head of the ...
-
Manufactured by TES VSETIN s.r.o.based in CZECH REPUBLIC
Synchronous generators are among the TEM division’s products in highest demand. They are suitable for all types of hydro turbines with outputs up to 30,000 kVA. In spite of the product’s common characteristics,it is a customized product manufactured according to requested parameters for each specific application. The machine design is worked out by a team of experienced designers. A ...
-
Manufactured by Hangzhou Fuyang Taomen Gate Operators Co., Ltd.based in CHINA
With the overheat protector inside, it will cut the electricity when the motor temperature reaches the rated value. Stable transmission thanks to turbine and screw devices. Easy to install. When the power is off, use the clutch and open the ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Nozzle is the conical contraction tube at the end of the pelton turbine pressure ...
-
Manufactured by Hydroalp S.r.l.based in ITALY
Hydroalp installs Francis turbines for medium head plants from a few tens of meters up to about one hundred meters, with flow rates from a few tens of liters up to a few cubic meters per second. Francis turbines are the most efficient turbines available. On the other hand, their operating capacity is limited with variable flow, therefore in some cases, it is necessary to distribute the maximum ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you