Hydropower Equipment For Hydro Energy Available In Virginia
-
ShowcaseManufactured by Energy Systems & Design (ES&D)based in CANADA
New! Injection Molded housing with drip lip! The 1K Micro Hydro Power System is one of Energy System and Design’s answers to a version of our Stream Engine that can provide reliable power for your needs at an affordable price point. We have a steady supply of these systems available for our customers. Please refer to our Hydro Survey on our web page “How it works” and gather ...
-
ShowcaseManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is ...
-
ShowcaseManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Constructed in 1.5-inch square steel tube 12, 14 and 16 gauge. Also includes a double acting Hydraulic hand pump. This charging bier is fully CE Safety Certified and incorporates an Anti-Bacterial finish. Principally designed for charging directly into the cremator. The manual operated pump is a standard feature standard and the bier is designed with a standard overhang of ...
-
PremiumManufactured by Dragflow S.r.l.based in ITALY
Thehydraulic power packsare based on diesel engines, compliant with the latest emission requirements, or electric motors built with cutting-edge ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The hydraulic vice have been designed for short-term clamping of downhole tools or other cylindrical workpieces. The 3-point clamping is carried out via a manual spindle and a hydraulically operated prism. The spindle is turned down to the diameter of the workpiece. Then the required clamping force is generated by the hydraulic lifting of the prism. The prism is equipped with specially textured ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The Inciner8 Autoloader is a British steel product made of the highest-grade steels and manufactured by our Queens Award Team, recognised for their innovation and manufacturing ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The bucking unit has been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Lightweight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m / 25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power ...
-
PremiumManufactured by D. R. Sperry & Companybased in USA
1500mm 200 cubic feet filter cakes capacity, Standard Recessed Chamber Plates, EHCP electric hydraulic power unit, Plate shifter with Cloth Washer and Bombay Drip Trays, 7 presses for merrill crowe Gold ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 3-split Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. The 3-skid layout is separated in a winch, an operators and a hydraulic power pack container. The hydraulic pump / motor combination guarantees high pull force and speed at any ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the ...
-
Manufactured by Parker Hannifin Corpbased in USA
For seal kits and replacement parts for Miller Fluid Power Hydraulic and Heavy Duty Pneumatic Cylinders, contact your local distributor or e mail to ...
-
Manufactured by F.Nencini Srlbased in ITALY
Used as turbine by-pass or to draw the water from dams. They reduce the excess head of the inflow, discharging a tamed outflow into the stilling basin and then into the downstream channel. We also design and engineer the stilling well related to the ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
Many industries aim to reduce their ecological footprint by minimizing energy consumption. Sulzer Hydraulic Power Recovery Reaction Turbines can be used to capture lost ...
-
Manufactured by Armada Systems, Incbased in USA
Powered by 8.0 HP 4 cycle Commercial Honda Gasoline Engine. AS-108 is equipped with manual start and low oil shutdown, with overhead valve design. AS-108 powers the AS-16 HB hydraulic cleaning brush head and prop polishing head. AS-16 HB cleaning head will run the following stocked optional ...
-
Manufactured by Ebco Hydro Services, a division of Ebco Industries Ltd.based in CANADA
Ebco steel trash racks are installed at the inlets of the diversion channel of hydropower stations and the inlets and tailgates of pumped-storage power stations. They are designed to block the solid debris carried by the water flow and do not enter the diversion channel to ensure that the gate and turbine equipment are not damaged, and the normal operation of the equipment is ensured. The trash ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you