Kaplan Hydro Turbines Equipment For Hydro Energy In Canada
-
Manufactured by Reivax North America, Inc.based in CANADA
The RVX Power Speed Governor System was developed for speed and power control of turbines. Besides speed regulation, they can perform all the supervision, command and automation functions required for power generation turbines. The speed governor RVX Power system can be fully customized to meet the most demanding requirements. Reivax can supply a turnkey solution or individual components, ...
-
Manufactured by Reivax North America, Inc.based in CANADA
The Integrated Voltage and Speed Regulation RTVX Power Systems were developed to integrate the voltage regulation system and speed governor system, optimizing the signals and resources. The RTVX Power performs all supervision, control, and automation functions related to the generating unit, and can be fully customized meet the most demanding projects. We can supply the complete system or ...
-
Manufactured by Ebco Hydro Services, a division of Ebco Industries Ltd.based in CANADA
Ebco Hydro Services provides hydro turbine parts for Francis and Kaplan, including propellers, large pumps, pump-turbines, and Kaplan conversions. All of our designs are customized to meet specific project requirements including life extension, increased capacity, peak efficiency, elimination of cavitation, and environmentally friendly ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use: Kaplan turbine is a double-regulated turbine. It is equipped with a Kaplan runner with variable-pitch blades that is hydraulically optimized for a wide range of discharge and a relatively wide range of head and is combined with regulated guide vanes, which makes a Kaplan turbine suitable for a wide range of discharge and head. The governor enables optimizing the ...
-
based in CANADA
Edmunston energy's vertical Kaplan power station had a worn components and was out of alignment. The entire dam had settled and the unit was no longer plumb. CME documented dismantling under our specialists' experienced supervision. We determined that the cause of out of plumb was settling of the dam itself. We removed and serviced worn bearings, repaired shaft areas, did weld repair of ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use:Pit and Bulb turbines are horizontal axial flow units equipped with a regulated Kaplan runner. These turbines are typically used at low heads (1,5 m to 25 m) and high discharges. The double regulation design allows wide operating range covering various heads and discharges. ...
-
Manufactured by Canadian Hydro Components Ltd. (CHC)based in CANADA
CHC supplies more Axial Flow Kaplan and Propeller turbines than any other type of equipment in its product line. These units are built for durability and high efficiency and offer one of the most competitive cost-profitability ratios in the industry. Axial Flow Kaplan turbines feature adjustable wicket gates and turbine blades, to optimize efficiency across a wide range of heads and flows. They ...
-
Manufactured by Canadian Hydro Components Ltd. (CHC)based in CANADA
Maximum output and control in higher head conditions. Specifically suited to high head hydro sites, CHC manufactures a range of conventional Kaplan turbines ranging in size from 500 mm to 3200 mm. Conventional Kaplan turbines feature adjustable turbine blades and wicket gates and are designed to optimize efficiency across a wide range of heads and flows. These turbines are arranged vertically and ...
-
Manufactured by OSSBERGER GmbH Co. KGbased in GERMANY
When it comes to very small heads, other technical approaches can be advantageous in order to meet the needs of the customer. That is why OSSBERGER plans systems with Kaplan turbines here. The decision on the suitable type of power plant is made following an intensive examination of the customer's requirements and the planned ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use: The main characteristic of Saxo Turbines, Vertical tubular and S-type turbines is the axial flow arrangement of the unit, use of a conical distributor and absence of a spiral case. All unit types may be equipped with a regulated Kaplan runner, enabling the unit to operate efficiently under a wide range of discharges and heads. These type of turbines typically ...
-
Manufactured by Dependable Turbines Ltd. (DTL)based in CANADA
Dependable Turbines Ltd. (DTL) has an excellent reputation for designing, manufacturing and supplying very high quality components in our turbine packages at a very competitive price for small scale hydro plants. The hydraulic performance of DTL ‘state of the art’ products is comparable to the large turbine manufacturers. Every project is thoroughly engineered and checked to provide ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you