Hydro Energy Equipment In Australia
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The Inciner8 Autoloader is a British steel product made of the highest-grade steels and manufactured by our Queens Award Team, recognised for their innovation and manufacturing ...
-
Manufactured by Enerpacbased in USA
Enerpac Atlas series gasoline powered high pressure hydraulic pump with patented Genesis Technology means: coaxial piston design ensures high performance, first-stage piston pump for improved efficiency. High by-pass pressures improve productivity. All Atlas pumps feature sturdy roll cage for use in tough environments. Four-cycle Honda motor 2,2 ...
-
Manufactured by Turbulentbased in BELGIUM
We develop efficient hydropower plants for rivers and canals with a low height difference (between 1.5 - 3.5m), thanks to new technology based on the vortex principle. We generate electricity using an individual turbine or a network of multiple turbines, all designed for durability and low ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
The S66-1.25 MW was designed for generating the optimal power output even at sites with a modest wind speed regime. S66-1.25 MW is equipped with a dual-speed, dual-rating asynchronous generator; it can operate within a limited speed range. In conjunction with the pitch system, it is possible to achieve an optimal energy yield within a wide wind range, with comparably low loads. Between 2002 and ...
-
Manufactured by Spagnolo Engineeringbased in AUSTRALIA
The linkage mounted Hydraulic Power Pack allows operation of all the functions of the Pruning machinery. The Hydraulic power packs ensure adequate hydraulic flow capacity. Spagnolo Hydraulic Power Packs allow ease of use and responsiveness to cutters and cylinder functions by the full electric over hydraulic controls of the power ...
-
Manufactured by Sundermann Water Power Ltdbased in AUSTRALIA
The Sundermann Turbine is a submerged water turbine which drives a generator. It is specifically designed to maximise operational efficiency in slow to medium speed water flows of 6-12 knots. The Sundermann Turbine is suitable for installations where water flow is either in a single direction, such as rivers or ocean currents, or in tidal areas where the water flow reverses direction ...
-
Manufactured by Nitto Kohki Europe Gmbhbased in GERMANY
Special steel body is tough against vibration and impact! Male and female thread end configurations are available. Low pressure loss characteristic suits hydraulic equipment ...
-
Manufactured by Global Spill Controlbased in AUSTRALIA
Application: Starting at 5hp and extending to 100hp, Global Power Packs are designed and manufactured in-house, using the technical expertise of world leading manufacturers and robust, industry standard components. Manufacturing both the Power Pack and the Equipment it will be driving allows us to tailor make a system that not only works efficiently, but is just right for your ...
-
Manufactured by Wave Swell Energy (WSE)based in AUSTRALIA
The Wave Swell Energy (WSE) technology is based on the well-established concept of the oscillating water column (OWC). The OWC is an artificial blowhole consisting of a chamber that is open underneath the waterline. As waves pass the OWC, the water rises and falls inside, forcing the air to pass by a turbine at the top of the chamber. This turbine generates ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...
-
Manufactured by John Deerebased in USA
The 60G’s compact size and reduced-tail-swing design enable this small-but-mighty machine to specialize in close-quarters work. But that’s not the only reason to run one. Its highly fuel-efficient, direct-injected diesel meets rigid Final Tier 4 emissions standards and is noticeably quiet so you can put it to work almost anywhere, any time. Standard-equipped with backfill blade, ...
-
based in AUSTRALIA
The airWAVE turbine is a design evolution, improving upon the original Denniss-Auld turbine. The airWAVE turbine has fewer moving parts and a conversion efficiency that is higher than both the Denniss-Auld and other comparable turbines. Like the Denniss-Auld, the airWAVE turbine is located well above the ocean, with no moving parts in the water. The airWAVE turbine further improves the overall ...
-
Manufactured by Enerpacbased in USA
The strand jack lifting technique originates from the concrete post tensioning principle. A strand jack can be considered a linear winch. In a strand jack, a bundle of steel cables or strands are guided through a hydraulic cylinder; above and below the cylinder are anchor systems with wedges that grip the strand bundle. By stroking the cylinder in and out while the grips are engaged in the ...
-
Manufactured by John Deerebased in USA
You said you wanted a CTL with even bigger abilities. We heard you. The 331G's refined vertical-lift loader design rises higher and reaches farther, for quicker and easier loading. Serves up substantially greater boom and bucket breakouts, too. In fact, these large frames have more horsepower than a small backhoe or crawler, so you accomplish more with just one CTL. They also work more ...
-
Manufactured by John Deerebased in USA
You said you wanted a CTL with even bigger abilities. We heard you. The 333G's refined vertical-lift loader design rises higher and reaches farther, for quicker and easier loading. Serves up substantially greater boom and bucket breakouts, too. In fact, these large frames have more horsepower than a small backhoe or crawler, so you accomplish more with just one CTL. They also work more ...
-
Manufactured by Hydrostor Inc.based in CANADA
Hydrostor's proprietary Advanced Compressed Air Energy Storage (A-CAES) technology is the leading low-cost bulk energy storage solution. It addresses intermittent renewable generation (solar, wind), reserve capacity, peak shaving, and transmission and distribution deferral. Hydrostor offers a complete solution including financing and warranty through our strategic EPC ...
-
based in AUSTRALIA
Solar Tower STP technology proposes use of solar radiation to heat air beneath an expansive translucent canopy to create a solar thermal wind to drive large centrally located turbines to generate electricity. Frequently asked questions about Solar Towers are answered on the Solar Tower FAQ's page. Solar Tower STP technology has three main ...
-
Manufactured by John Deerebased in USA
Looking to get more out of your “mini ex”? Make your next compact excavator one of our G-Series. Inspired by input from equipment owners and operators like you, this 50G Compact Excavator is loaded with customer-driven enhancements. Such as a more spacious cab with a wider entryway. Larger expanse of glass for unsurpassed visibility. Fuel-saving auto-shutdown and power/economy work ...
-
Manufactured by Danvest Energy A/Sbased in DENMARK
The Danvest Power Box® is a 20 or 40 foot container housing a conventional diesel generator fitted with the unique Danvest system. Wind turbines or solar systems simply connect. The unique Danvest 'low-loading' capability enables high operational fuel ...
-
Manufactured by John Deerebased in USA
With larger material-handling buckets and beefed-up performance specs, our new 844K-III Loaders deliver serious productivity. And they're built rock solid to take on the toughest aggregate and material-moving applications. Armed with insights from our Customer Advocate Group, we designed these productive machines to be even more rugged and reliable. We equipped them with improved hydraulic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you