Hydro Energy Equipment in Europe

  • Hydroelectric

    The company's activity in the field of hydroelectric power stations covers both turnkey projects and operation and maintenance contracts. Elecnor has been involved in the development and construction of numerous power station projects, and has in place all the skills required to cover every phase involved. Over recent years, and particularly on ...

    By ELECNOR based in Madrid, SPAIN.

  • Showcase

    OSSBERGER - Kaplan Turbines

    Based on the Francis Turbine the Kaplan Turbine was developed by the Austrian engineer Victor Kaplan towards the beginning of the 20th century. Due to its adjustable runner blades this turbine system is most adaptive. Apart from the original version with vertical shaft and inlet spiral the bulb turbine variant has spread widely over the world.

    By OSSBERGER GmbH Co. KG based in Weissenburg, GERMANY. from Kaplan Turbines Product line

  • Premium

    Landustrie LANDY - Hydropower Screw Turbines

    The new range of the Landustrie screw pump covers the hydropower screw turbines. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 meter.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Hydropower Screw Turbines Product line

  • Premium

    Model HPU Range - Hydraulic Power Units

    Hydraulic fluid capacity from 19 to 7,570 litres  (5 to 2,000 U.S. gal). Operating pressures up to 345 bar (5,000 psi). Flow rates up to 3,785 lpm (1,000 U.S. gpm). Electrical classifications: NEMA 4, 4x, 7 or comparable  CSA or ATEX ratings. Custom engineered solutions to meet the specific  demands of each application. Sole source ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Hydraulic Power Units Product line

  • Premium

    Rotork - Hydraulic Power Units (HPU)

    Hydraulic power units (HPU) complement our extensive offering of rotary and linear actuators. We have over three decades of experience in their manufacture with units in service in a variety of plants and pipelines in locations spanning the globe.

    By Rotork plc based in Bath, UNITED KINGDOM. from Hydraulic Power Units (HPU) Product line

  • Premium

    OSSBERGER - Crossflow Turbines

    Original OSSBERGER® crossflow turbines are built from standardized individual components which can be configured to a tailor-made plant according to site requirements. This modular system facilitates low-cost manufacture whilst designing the functions to suit the specific project.Original OSSBERGER® crossflow turbines are ideal within a power ...

    By OSSBERGER GmbH Co. KG based in Weissenburg, GERMANY. from Crossflow Turbines Product line

  • Premium

    SINEAX - Model G537 - Transducer for Phase Angle Difference

    Transducer for the conversion of the difference in phase angle from two electrical systems requiring synchronization into a direct current or voltage signal which is proportional to the measured value.

    By Camille Bauer Metrawatt AG based in Wohlen, SWITZERLAND. from Transducer for Phase Angle Difference Product line

  • Model VP1350 & VP800 - Gas Freeing Fan

    Offering either high or medium throughput these water driven gas freeing fans can produce up to 14,400m3/hr air displacement to reach depths of 30m below deck using its unique CFD (computational fluid dynamics) designed water turbine.

    By Victor Marine Ltd based in West Thurrock, UNITED KINGDOM. from Gas Freeing Fan Product line

  • Mavel - Pelton Turbines

    The Mavel Pelton turbine is an impulse turbine for high heads up to 1000 meters (3280 ft). Mavel’s turbines have a horizontal or vertical arrangement. The Pelton turbines are produced with a varying number of jets (one to six). The use of multiple jets can cover a wide range of applications and are able to provide two to four times the ...

    By Mavel a.s. based in Benesov, CZECH REPUBLIC. from Pelton Turbines Product line

  • Zeco - Submerged Kaplan Turbine ( Bulb)

    Represents the evolution of Kaplan turbine, developed to reduce civil works and the enviromental effects in HPP. Power from 80 kW up to 2 MW
Horizontal or vertical configuration.

    By Zeco Di Zerbaro & Costa & C. S.r.l based in Fara Vicentino (Vicenza), ITALY.

  • GB Inspection - Model SC - Single Crystal Compression Wave Probe

    Single crystal 0° compression wave probe with steel face, giving good sensitivity and resolution. A general purpose probe. Available in 10 mm and 20 mm crystal sizes.  Subvis connector fitted as standard.

    By GB Inspection Systems Limited based in Cannock, UNITED KINGDOM. from Single Crystal Compression Wave Probe Product line

  • SAS - Horizontal Screw Diameter

    Galvanised tube. Archimedes screw. Rotation speed 475 tr/mn. Flow with PS 0,75 : 220 qx/h. Belts transmission.

    By SAS René TOY based in Montoire sur le Loir, FRANCE. from Horizontal Screw Diameter Product line

  • Francis Hydro Turbines

    Francis turbines generally are the most efficient solution for heads ranging from 40 to 600 meters.The runner design can be adapted to get the highest level of efficiency in its whole range of application.Francis turbines are very robust and able to sustain the high mechanical stress resulting from high heads.Alstom has successfully completed ...

    By Alstom based in Saint-Ouen, FRANCE. from Francis Hydro Turbines Product line

  • Smaller Generators

    With their rather unique construction, our smaller direct coupled BEVI generators are designed and built at our factory in Blomstermåla. Hydropower generators are built in many different styles up to a few MVA and with special adaptations to the turbine.

    By Bevi AB based in Blomstermåla, SWEDEN. from Smaller Generators Product line

  • Model SSK type - S-Shape Double Regulated Horizontal Kaplan Turbine

    Standard runner diameters 600 – 2400 mm. Suitable for heads 1,5 - 4 m. Runner blades made from special bronze alloy

    By Hydrolink, s.r.o. based in Roztoky, CZECH REPUBLIC. from S-Shape Double Regulated Horizontal Kaplan Turbine Product line

  • Pelton Turbine

    Since 1904 CKD Blansko has manufactured more than 53 Pelton turbines and they operate at 28 sites. Their total output amounts more than 1 678 MW. CKD Blansko Holding can produce and supply Pelton runners of welded structure. The runner consists of a disc forged together with half of the buckets, while the remainder of the buckets is welded in. ...

    By CKD Blansko Holding, a.s. based in Blansko, CZECH REPUBLIC.

  • Model VP1500WS, VP1000WS & VP750WS - Gas Freeing Fan

    Offering high, medium and low flow throughput these water driven gas freeing fans can produce up to 14,800m3/hr air displacement to reach depths of 30m below deck using its unique CFD(computational fluid dynamics) designed water turbine.

    By Victor Marine Ltd based in West Thurrock, UNITED KINGDOM. from Gas Freeing Fan Product line

  • Planetary Silo Dischargers

    Agora Services Planetary Silo Dischargers are designed for use in flat bottomed silo for unloading difficult flowing materials such as coal, ash, cereal meal, etc. The drive mechanism gives both rotational and progression movement to an Archimedean screw allowing the discharger to work on the principle 'first in first out', by drawing material ...

    By Agora Services Limited based in Northants, UNITED KINGDOM.

  • Diagonal Turbine

    The diagonal turbine, just like the Francis, covers the range of medium heads (from 25 to 100 meters). With regards to efficiency, and thanks to their adjustable blades, Diagonal turbines are more tolerant than Francis turbines to discharge and head variations. They comprise 8, 10 or 12 inclined and adjustable blades. Mhylab has developed and ...

    By Mhylab - Mini-hydraulics laboratory based in Montcherand, SWITZERLAND.

  • Rainpower - Small Hydro Plant

    Rainpower started to focus on small hydropower plants in 2009. However, our employees have many years’ experience in the construction of small-scale power pre-dating Rainpower’s existence, gained at Kværner and at the workshop in Sørumsand. Rainpower’s small-scale power solutions are essentially based on the ...

    By Rainpower Norway as based in Kjeller, NORWAY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you