Hydro Energy Equipment In Europe
-
based in UNITED KINGDOM
Coastal Modelling - Simulation of waves, currents and energy dissipation by the reef. Reef Structure - Lightweight modular units that are stacked together and form the core of the reef. Mineral Accretion - Growth of high strength rock crystals using electrolysis. CCell Sense - Monitoring and precise distribution of renewable energy to stimulate rock and coral growth where it is needed. Corals - ...
-
Manufactured by Poclain Hydraulicsbased in SLOVENIA
VDF free-wheeling valve allows to disengage the hydraulic motor by allowing the pistons to return in cylinder-blocks and the motor to turn in freewheeling mode. It prevents contacts of camring and pistons at high ...
-
Manufactured by Modular Pontoon Systems BVbased in NETHERLANDS
Pulling force at first layer: 15.0 ton; Holding force at first layer: 22.5 ton; Wire length / diameter: 400m / 28mm; Speed at first layer: 10 ...
-
Manufactured by Waterpumps WP Oybased in FINLAND
The tube turbine power range is from 20 to 700 kW. Units have a direct drive configuration where the turbine and the generator are on the same shaft having common bearings and ...
-
Manufactured by PADCON GmbHbased in GERMANY
Increase Solar PV Plant Output With Padcon. Solar power plants supply electricity at a utility level, to energy providers who then sell onto consumers. Unlike the 5 kilowatt system a homeowner might install on their roof to minimise electricity bills, PV power plants have capacities to support multitudes. Padcon helps you to increase the performance ratio of your power plant! In 1968, the first ...
-
Distributed by Andino Hydropower Engineering doobased in SLOVENIA
The Vigevano hydro-electric plant on river Ticino, Italy, was rehabilitated after 100 years of operation with its original machinery. ENELGreen Power, the plant owner had awarded a respective works contract to ANDINO in June 2002. The new generating units are in commercial operation since September ...
-
Manufactured by Tedom Schnell GmbHbased in GERMANY
Efficiency-optimized 5-cylinder SCANIA- SCHNELL in-line engine, User-friendly PLC control unit with touchscreen and remote monitoring, Durable double bearing synchronous generator, Exhaust heat exchanger made from high-grade stainless steel, Common rail injection system with SCHNELL control electronics, Compact, two-stage water air ...
-
Manufactured by Mavel a.s.based in CZECH REPUBLIC
Runner Diameters 400 mm to 1400 mm. Head Range 15 to 300 meters (50 to 1000 feet). Flow Range 0.5 to 20 cms (18 to 706 cfs). Power Output 100 kW to 12 MW. Transmission Runner Assembled to Generator or Turbine ...
-
Manufactured by MJ2 Technologie sasbased in FRANCE
Noting that on a number of applications the VLH turbines were not necessarily the best solution for the site, we decided to develop a range of Kaplan conventional turbines, with vertical double or single adjustment as well as horizontal or inclined axial turbines, which we exclusively propose equipped with PMGA direct drive ...
-
Manufactured by JLA Hydro Srlbased in BELGIUM
In order to offer turnkey projects to its customers, JLA Hydro has developed advanced skills and knowledge in the field of ...
-
Manufactured by Wave for Energy S.r.l.based in ITALY
In the last decade W4E brought the Wave Energy Converter ISWEC from concept to a full scale 100 kW device. In order to obtain a reliable full scale device, such development from concept to sea operation was performed following the stages of the roadmap proposed in the Protocols of the EU FP7 Equimar Project. ...
-
Manufactured by Elpowerbased in ITALY
Inverters in the CLEANVERTER 150-250 TL series have been designed specifically for grid connection of variable-speed renewable source power plants using a permanent magnet synchronous generator or excited synchronous or asynchronous. CLEANVERTER 150-250 TL is a comprehensive system built in an cabinet for indoor installation without transformer, with a double ( back to back) inverter ...
-
Manufactured by Siapro d.o.o.based in SLOVENIA
Francis turbine housing is filled with water, which means that all the impeller blades work the same force. Turbine power depends on the flow and direction of water flow on the impeller blades. To regulate the flow of water a Francis turbine has blades installed in the turbine casing. Blades in the casing are interconnected in a mechanism called the guide. Through changing the location of these ...
-
Manufactured by EPF Elettrotecnica S.r.l.based in ITALY
The seas and oceans are sources of large quantities of renewable, dense and clean energy, presented in the form of waves and underwater ...
-
Distributed by Tuba Turbine GmbHbased in GERMANY
Hydropower plants harness water's energy and use simple mechanics to convert that energy into electricity. Hydropower plants are actually based on simple concept water flowing through a dam turns a turbine, which turns a generator. Here are the basic components of a conventional hydropower plant. Hydropower is considered a renewable energy resource because it uses the Earth's water cycle to ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
IE Class: IE1. Output: 0,75kW – 355kW. Poles: 2|4|6|8|10|12 pole. Speeds: 500–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 80–400. Aluminium framesize: 56–200. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411. Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-2-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V ...
-
Manufactured by Ferbo S.r.l.based in ITALY
Efficient turbine drive mounted in monobloc with the gearbox. Double water inlet. 4 speed gearbox and equipped with automatic drive disengagement and assistance quick hose-rewinding. Safety devices for PTO and rewinding out of the drum. Digital meter counter. Moving transmission to the reel through toothed crown of huge ...
-
Manufactured by MJ2 Technologie sasbased in FRANCE
Hydraulic turbines are bulky by nature. Indeed, to generate even relatively moderate output (on the order of some hundred kW) under heads lower than 3 m, turbine flow rates can exceed 10 m3/s. This results, for water supply works, in large civil engineering structures proportioned to the collected flow ...
-
Manufactured by Tecnoturbines S.Lbased in SPAIN
Provides the necessary power for water management companies. Designed to supply the power necessary to keep the remote controls and pressure regulators running, which removes the need to periodically replace batteries. ...
-
Manufactured by H2 Core Systems GmbHbased in GERMANY
The Maximator Hulc Series is a modular Gas Compression System, specifically designed for Hydrogen compression up to 1000 bar with scalable volume flow. A standard configuration consists of one control module (MASTER-module) and up to three gas booster modules (X-modules) – first stage module up to 140 bar, second stage module up to 400 bar and the final stage module up to 1000 bar. This ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you