Hydro Energy Equipment In Germany
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Best in DC and Pulsed-DC Power Delivery Unify. A robust, coordinated suite of power generation specifically designed to enable advanced, high-tech ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s front-line DC generator provides performance and reliability required in dual-magnetron sputtering ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Most Recognized DC Power Supply for less than and equal to 20 kW Processes. Advanced Energy's Pinnacle DC generators enable quality thin films and maximum process ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The hydraulic vice have been designed for short-term clamping of downhole tools or other cylindrical workpieces. The 3-point clamping is carried out via a manual spindle and a hydraulically operated prism. The spindle is turned down to the diameter of the workpiece. Then the required clamping force is generated by the hydraulic lifting of the prism. The prism is equipped with specially textured ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Process-Proven, Pulsed DC for Single-Magnetron Reactive Sputtering of Thin Dielectric Films. Pinnacle Plus+ generators deliver DC power in a pulsing configuration enabling reactive sputtering of extremely uniform, high-quality dielectric films. Pinnacle Plus+ generators deliver DC power in a pulsing configuration enabling reactive sputtering of extremely uniform, high-quality dielectric ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Robust, compact DC generator designed exclusively for low power applications where precision and process repeatability are ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The bucking unit has been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The MDX Series Enables Low-Power Magnetron Sputtering in a Small and Affordable Package. An industry workhorse, the MDX Series diligently serves low-power applications where robust, accurate power delivery is a ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Lightweight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m / 25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 3-split Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. The 3-skid layout is separated in a winch, an operators and a hydraulic power pack container. The hydraulic pump / motor combination guarantees high pull force and speed at any ...
-
Manufactured by REHART Groupbased in GERMANY
Hydropower systems with a screw belong to small-scale hydropower plants. Don’t be deceived by the term “small”. This technology provides power to 13 million European households. This saves the environment 29 million tons of ...
-
Manufactured by Kuhn Technische Anlagen GmbHbased in GERMANY
KUHN KWS Archimedean screw pumps are lifting devices, which are extremely well-suited for sewage transport and as drainage pumps and are unsurpassed by any other type of pump in terms of technology and efficiency. They are mainly used as intermediate lifting stations in sewer networks, as draw and polder pumping stations, as inlet pumps for sewage treatment plants and also as sludge return ...
-
Manufactured by UGA System-Technik GmbH & Co. KGbased in GERMANY
No matter what type of cable is to be led through walls or ceilings - UGA's system GPD always offers a safe solution.UGA Rubber Press Seals can be inserted into the most varied pipe linings, diamond tipped drilled holes or entrance plates without any ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you