Hydro Energy Equipment In Italy
-
PremiumManufactured by Dragflow S.r.l.based in ITALY
Thehydraulic power packsare based on diesel engines, compliant with the latest emission requirements, or electric motors built with cutting-edge ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Constructed in 1.5-inch square steel tube 12, 14 and 16 gauge. Also includes a double acting Hydraulic hand pump. This charging bier is fully CE Safety Certified and incorporates an Anti-Bacterial finish. Principally designed for charging directly into the cremator. The manual operated pump is a standard feature standard and the bier is designed with a standard overhang of ...
-
Manufactured by IREM SpAbased in ITALY
This type of hydroelectric plants is used when the electrical power is really low and there isn’t a national grid, IREM is able to supply turbines with very lower power and dimensions, satisfying these needs with a product of high quality and reliability. Typical application areas are shelters, cottages or mountain pastures where it is essential to have simple systems, easy to install and ...
-
Manufactured by HITEMA INTERNATIONAL S.R.L.based in ITALY
Freecooling liquid chiller ECF.630 with double refrigerating circuit, double hydraulic circuit and double power supply. Each hydraulic circuit with double pump and hydraulic connections on the opposite side than standard unit. Ambient temperature 100% free-cooling at -6,8°C ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
A variable pitch controlled wind turbine with a 54 m rotor. Since installation of the first prototype in 1997, wind turbines with total capacity of over 20 MW have been installed with successful operation in Germany, Austria and Canada. The turbine is available in 50 m or 73 m hub heights. The towers are manufactured using the highest quality steel with a durable C5 protective outer coating to ...
-
Manufactured by Aria srlbased in ITALY
Libellula DC is a special version of the Libellula wind turbines, designed in order to be used in stand-alone systems, not connected to the electrical network (off-grid). Mechanical and aerodynamic characteristics are those of the standard on-grid models while the electrical control system is designed to be connected with an external battery bank. The wind turbine is able to charge the battery ...
-
Manufactured by Casella Macchine Agricole S.r.lbased in ITALY
This type of machines draw required force for tube recovery by exploiting water passage inside a turbine. The proposed solutions are ...
-
Manufactured by Mita Oleodinamica S.p.A. - CBM groupbased in ITALY
Electronic Hydraulic Power Lift for Lifting Capacities Up to 2000 ...
-
based in ITALY
PAN-EU Small HydroPower Atlas (SHPA) is an user-friendly spatial decision support system for run-of-river hydropower plants feasibility and development across EU. The product innovation consists in making feasibility assessment much quicker and affordable, which may be a critical aspect in the development of small plants. ...
-
Manufactured by Tschurtschenthaler Turbinenbaubased in ITALY
Hydroelectric power stations for small hydropower plant is nowadays the ideal way for many companies and private persons for an autarchic energy supply. We have been specialising for years in this environmentally friendly sustainable energy recovery and we fulfill with our hydraulic turbines the most unusual customer requests. In our South Tyrolean family company everything is produced ...
-
Manufactured by Exergy International Srlbased in ITALY
Exergy designs and supplies Organic Rankine cycle binary plants for geothermal resources. The first and only radial outflow turbine working with an organic fluid gives outstanding performance and flexibility. The availability of products using flammable or non-flammable working fluids and synchronous or induction generator assures the best performance of Exergy ORC modules. These are available ...
-
Manufactured by Zeco Di Zerbaro & Costa & C. S.r.lbased in ITALY
Reliable turbine for medium hydraulic head and flow rates. High efficiency due to the possibility of regulating wicket gate according to the available flow rate. Supplied with runner directly hanged over to the generator shaft for a compact solution, wired on a single frame, ready to be installed downstream of the penstock and started ...
-
Manufactured by Rössl & Duso S.R.L.based in ITALY
Distributor Francis Turbine Ext. Diam. 3.000 mm. Height 2.000 ...
-
by AMG S.r.l.based in ITALY
The CR model screens are made of a fixed part and a movable one. The fixed part, having an inclination of 15 degrees apeak, includes the bar section, the skid of the bar extension, the side-runners, the upper and lower joining-girders. The movable part is composed of a steel trolley on which are assembled the rotating comb and the respective trolley shifting and rotating comb hydraulic systems. ...
-
Manufactured by Ttm Tension Technologybased in ITALY
Installed power: 4,5 KW. Power supply: 3P+T 380 volt 32 ampere. Weight: 370 Kg/pc. Control: button strip. Functions: stressing – locking – return. Max. stressing pressure: 550 bar. Max. locking pressure: 150 bar. Max. return pressure: 150 bar. Dimensions: 1160x670x1140 mm. Hydraulic tubes: two. ...
-
based in ITALY
PAN-EU Small HydroPower Atlas (SHPA) is an user-friendly spatial decision support system for run-of-river hydropower plants feasibility and development across EU. The product innovation consists in making feasibility assessment much quicker and affordable, which may be a critical aspect in the development of small plants. ...
-
Manufactured by IREM SpAbased in ITALY
Ecowatt Hydro Pelton turbines are water turbines suitable for heads from 20 m to 550 m and the effective flow rates ranging from 0.5 l/s to 350 l/s. The buckets are made of precision cast stainless steel. All Pelton turbines are fitted with six nozzles controlled by special flow regulation valves, which help the efficiency of the system. The operation of the regulation valves may be manual or ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...
-
Manufactured by Casella Macchine Agricole S.r.lbased in ITALY
Reducer flow hydraulic turbine pipe rewinding system with free maintenance patented coaxial reducer. Minimum pressure required 3,5 Bar, maximum 8 Bar (see proper manometer). Rewinding speed fully adjustable from 0 to 40 mt/h. Automatic stop at the end of run. Compact dimensions, optimum weight balancing on wheels. Adjustable sector irrigator with spare nozzles. Easy and economical maintenance. ...
-
Manufactured by Doa srlbased in ITALY
Compact air compressor powered by hydraulic gear motor, the tool can work connected to the circuits of power packs, trucks, sky platforms, mobile workshops, excavators and all machines equipped with a suitable hydraulic circuit. The tools of the line can supplies air compressed with flow out put from 400 l/ min to 2000 l/min and pressure from 1 to 10 bar. The exclusive hydraulic motor has control ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you