Hydro Energy Equipment In Mexico
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The Current Transformers for with your 3 Phase Power Meter to measure power consumption! Select one per phase to be ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Constructed in 1.5-inch square steel tube 12, 14 and 16 gauge. Also includes a double acting Hydraulic hand pump. This charging bier is fully CE Safety Certified and incorporates an Anti-Bacterial finish. Principally designed for charging directly into the cremator. The manual operated pump is a standard feature standard and the bier is designed with a standard overhang of ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...
-
Manufactured by Potencia Industrialbased in MEXICO
Potencia Industrial designs and manufactures hydroelectric generators up to 30 MW, vertical and horizontal, suitable for Kaplan, Pelton and Francis turbines, for high or low speeds, with overspeed capacity up to over 200% nominal with high axial thrust. In the last 5 years we supplied over 60 MW of hydroelectric generators, installed at various hydro sites around the globe. We know that high ...
-
Manufactured by SEPAC Corporationbased in USA
Microprocessed Unit (Programmable Logic Controller) DRIVE MASTER PLUS constitutes a digital control system that allows for voltage regulation at the synchronous generator's terminals keeping in within its normal operation parameters in a safe way using the compensators and limiters included in the automatic ...
-
Manufactured by TSC Group Holdings Limitedbased in USA
The hydraulic power unit (HPU) is a critical part of the handling system’s operations. TSC hydraulic power units are provided to suit all applications, from individual equipment to complete handling systems with available flow rates in excess of 1000 ltr/min and pressures in excess of 5000psi. ...
-
Manufactured by Trucentbased in USA
Water is hurting your operations and driving up costs. Water is the most common source of contamination in oil-based process fluids. Free water and emulsified water aren’t just detrimental to your machine oil, lube, and hydraulic fluid performance—they lead to excess wear and maintenance. Water contamination also decreases the working life of your oil-based coolants and lubrication. ...
-
Manufactured by Dynamic Ratings Incbased in USA
The DRPD-15 is a portable PD analyzer featuring, fifteen independent highly sensitive, user configurable input channels; delivering the industry’s best signal-to-noise ratio and allowing connection to any brand of PD sensor! The analyser has the ability to store test results from multiple objects for uploading and further analysis, without the need for gain adjustments. The DRPD-15 has been ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
The Griffith Service Vise is a floor-mounted unit designed to hold a variety of tubular components while service work is carried out. The Griffith™ Service Vise work piece rests on a V-shaped tool support plate containing a series of tong dies. Clamping force is provided by a heavy leaf chain that is wrapped over the top of the work piece. When the chain latch is engaged, an air-over ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
Make up and break out tool joint connections with our fully customizable unit. The 1289 TorqueMaster Junior provides a safe and easy way to make up and break out tubular tool joint connections for shops with limited space or that don't require the full capabilities of a full-sized TorqueMaster unit. Designed for practicality and with service shop safety in mind, the TorqueMaster Junior is a fully ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
-
Manufactured by Pettibone Traverse Lift LLCbased in USA
Engineered to deliver results, the Traverse T1157 telehandler makes easy work of landing loads. Responsive hydraulics ensure smooth operation for any job ...
-
Manufactured by Pettibone Traverse Lift LLCbased in USA
Offering exceptional material handling capacity, the Extendo 1144B telehandler features a fuel-efficient 117-horsepower engine, IQAN-MD3 display, and Powershift ...
-
Manufactured by CeTeau B.V.based in NETHERLANDS
HIRC is a “dynamic” compaction technique consisting of a triangular, rectangular or hexagonal ”wheel” (typically between 8 and12 Tons) mounted on a trailer that is pulled by a tractor with a constant speed, making several passes over the soil. The effect of the speed combined with the “tampering” of the irregular “wheel” creates a waving effect that ...
-
Manufactured by Pettibone Traverse Lift LLCbased in USA
Offering exceptional material handling capacity, the Extendo 1056B telehandler features a fuel-efficient 117-horsepower engine, IQAN-MD3 display, and Powershift ...
-
Manufactured by Pettibone Traverse Lift LLCbased in USA
Using Pettibone's unique horizontally traveling boom, the T944 can move loads through building openings without having to actually move the ...
-
Manufactured by Eagle Internationalbased in USA
The patented Eagle Punch Cutter III is portable and designed to split OTR tires into three pieces, separating the sidewalls from the tread. It can handle a range of tire sizes, from a rim size of 39 inches and a tread width of 37 inches up to, and including, rim size of 63 inches and tread width of 70 inches. A blade is used to punch the tire while a programmable logic controller (PLC) controls ...
-
Manufactured by Pettibone Traverse Lift LLCbased in USA
Offering exceptional material handling capacity, the Extendo 944B telehandler features a fuel-efficient 117-horsepower engine, IQAN-MD3 display, and Powershift ...
-
Manufactured by Pettibone Traverse Lift LLCbased in USA
Offering exceptional material handling capacity, the Extendo 736B telehandler features a fuel-efficient 117-horsepower engine, IQAN-MD3 display, and Powershift ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you