Hydro Energy Equipment In Spain
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Transducer for the conversion of the difference in phase angle from two electrical systems requiring synchronization into a direct current or voltage signal which is proportional to the measured ...
-
Manufactured by Tecnoturbines S.Lbased in SPAIN
The HE Turbine has been designed to meet the most demanding energy requirements due to its high energy efficiency. It stands out for its high adaptability to adverse ...
-
Manufactured by Tecnoturbines S.Lbased in SPAIN
Provides the necessary power for water management companies. Designed to supply the power necessary to keep the remote controls and pressure regulators running, which removes the need to periodically replace batteries. ...
-
Manufactured by Ideal Electric Companybased in USA
IDEAL has been a leading supplier of low, medium and high-speed synchronous and induction generators for over 115 years. With thousands of these generators in operation around the world, our machines have proven their reliability in virtually all types of applications and environments, including gas, steam, and geothermal. ...
-
Manufactured by Sanimobel S.A.based in SPAIN
General Characteristics: Hydroelectric elevation by means of remote control, side release. The environment-friendly islands are simple, quick and safe systems to handle, both for citizens and when collected. Reduced visual impact. Hygienic and safe in an urban environment. Available 24 hours a day, 365 days of the year. They stop bad smells and prevent people and animals from searching through ...
-
Manufactured by Gamesa Electricbased in SPAIN
With proven experience, working in wind, hydraulic and marine generator projects, Gamesa Electric designs and manufactures high-power magnet generators and motors, nowadays of up to 8 MW, for any number of revolutions. Permanent magnet machines (which allow polar windings, brushes, exciters and voltage regulation equipment to be omitted) eliminate the losses caused by excitation of the rotor ...
-
Manufactured by Bornaybased in SPAIN
Wind + is the result of over 45 years of experience in the small wind industry, where Bornay has worked hard to innovate and to get a so far unknown ...
-
Manufactured by Tecnoturbines S.Lbased in SPAIN
Water turbine designed and developed to generate energy from water resources through the use of natural water pressure jumps, up to 10 m. The innovative electrical power system allows you to adapt the turning speed to changes in flow, for maximum efficiency without the need for adjustable blades. The Hydro Low Head turbine was developed alongside the company ...
-
Manufactured by Norvento Enerxíabased in SPAIN
With presence in various international markets, Norvento currently has more than 12.3 MVA of hydroelectric power generation plants in operation, construction and development, both in Spain and in other ...
-
Manufactured by Ideal Electric Companybased in USA
IDEAL ELECTRIC is the US leader in small hydroelectric experience, with over 250 projects and 800 MW installed. Exclusive US single source company – capable of producing both generators and switchgear and allowing for sole sourcing of a coordinated electrical ...
-
by Abengoabased in SPAIN
Transmission lines allow power to be produced in the optimal location but to be consumed where it is required, transporting it in an efficient and instantaneous way. Abengoa is an international leader in the construction of transmission lines and one of the leading private concession holders of lines in Latin ...
-
Manufactured by TAIMWESER S.A.based in SPAIN
From the early days we have been active in projects related to the power sector. Initially our activities within this sector were in the hydroelectric power plants, however today many counties have reached a maximum utilisation of their water resources for power and the power sector has turned to the nuclear sector. We are a leading supplier of cranes for the handling of low and intermediate ...
-
Manufactured by Imesa S.A.based in SPAIN
For Imesa, grilles are one of the most important elements of hydroelectric power stations. Imesa designs, manufactures and assembles grilles for fine and gross solids with no limit on size for hydroelectric power stations (hydroelectric, WWTPs, DWTPs and CCTPSs) to any quality standard, always in accordance with the exact calculations depending on the load of water in each power ...
-
Manufactured by Fanox Electronic, S.L.based in SPAIN
The SIL-G is a perfect protection relay for primary distribution which can protect a feeder by means of current, voltage and frequency functions. It also has the advantage to provide with the main functions to protect a generator protecting decoupling, load shedding and loss of main (islanding). It is normally used with a circuit breaker as cutting ...
-
Manufactured by Norvento Enerxíabased in SPAIN
Medium-range wind turbines for industrial self-use energy generation. Produce your own energy with our next-generation nED100 medium power wind turbine for industrial and commercial self-use energy generation and sustainable ...
-
Manufactured by ADES-Tempero Groupbased in SPAIN
The polygeneration seeks to obtain a continuous supply of electrical energy depending on the energy sources availability and maximum fuel economy. An intelligent system prioritizes most suitable energy source at all ...
-
Manufactured by Ideal Electric Companybased in USA
The first IDEAL ELECTRIC branded, multi-megawatt permanent magnet synchronous generator was introduced in 2018. The air-cooled machine sets new benchmarks for power density and weight saving in mobile gas turbine power unit applications for electric hydraulic ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
The S66-1.25 MW was designed for generating the optimal power output even at sites with a modest wind speed regime. S66-1.25 MW is equipped with a dual-speed, dual-rating asynchronous generator; it can operate within a limited speed range. In conjunction with the pitch system, it is possible to achieve an optimal energy yield within a wide wind range, with comparably low loads. Between 2002 and ...
-
Manufactured by Gamesa Electricbased in SPAIN
The hydroelectric sector is characterised by a high level of customisation, as each power station must be optimised according to the hydroelectric resource available and the configuration of the installation. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you