Hydro Energy Equipment In Maryland
-
by Jonas Inc.based in USA
A simple inexpensive device located outside the turbine, for the collection of exfoliated oxides and deposits representative of deposition inside the turbine. The collected deposits are analyzed to predict deposition and corrosion inside the turbine, and to assess boiler carry-over and the effects of steam and water chemistry upsets. The optional flow totalizer allows the average concentration ...
-
Distributed by DERP Technologies, LLCbased in USA
DERP Technologies, LLC systems, products and services help bridge the gap between today’s legacy grid and tomorrow’s smart grid. DERPTECH is focusing on designing interconnection devices and business models that bring more clean distributed electrical power into the grid at the utility local distribution network level and provide energy assurance systems through microgrids serving ...
-
based in USA
The goal of the robot is to safely and accurately control the power of the nozzle. Since American Hydro uses the most powerful pressure generating system, our robots are built with large safety factors to ensure the integrity of the machine. In effect, our robots are built to be extremely durable to perform in a variety of demanding ...
-
Manufactured by LPP Combustion, LLCbased in USA
The NGL 200 Power System operates on C1-C8 fuels to provide 200 kW of electric power with natural gas emission levels. The NGL 200 can optionally be configured as a Combined Heat & Power (CHP) system to also produce hot water. ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
The SNS end suction single stage pump range has been designed to exceed the highest energy efficiency regulations across all industries and also the design requirements of ISO 5199 international standard. The innovative design makes the pump more reliable while significantly reducing total cost of ...
-
Manufactured by Terexbased in USA
Paves full width, half width trapezoidal canals and straight side slopes up to 45-degree angles. Operator console positioned for full visibility. Legs adjust to accommodate all slope angles. Automatic machine operation. Machine travel with bogie drive system or optional track drive system. Optional canal ...
-
Manufactured by The Toro Companybased in USA
Imagine being able to perform with ease tasks you previously deemed too difficult due to limited access requirements or excessive manual labor. The Toro® Dingo® 220 compact utility loader provides great value and the power to do it all for you. The Dingo 220 is lightweight, gentle on turf, easy-to-use, and has incredible hydraulic power — making your business more productive, ...
-
Manufactured by John Deerebased in USA
With two variable-displacement piston pumps designed to deliver 'best-in-class' multi-functioning, the 437D with load-sensing hydraulics offers significant reduction in engine speed, noise levels, and fuel consumption. A dedicated swing circuit gives you continuous power for more productive delimbing and loading, while John Deere's 6068T turbocharged diesel has the high torque you need. And a ...
-
Manufactured by John Deerebased in USA
Don’t let its compact stature fool you. Like its larger G-Series siblings, the 35G is exceptionally durable. And for good reason — it shares many of the same uptime-boosting features such as powdered-metal oil-impregnated boom, arm, and bucket bushings. Rigid reinforced D-channel side frames. And heavy-duty X-frames. When you know how it’s built, you’ll run a ...
-
Manufactured by The Toro Companybased in USA
The Toro Dingo 220 provides exceptional value. Packed with 3000 psi (206.7 bar) and 14.8 gpm (56 lpm) of hydraulic power, the Dingo 220 is built with a 20 hp (14.9 kW) Kohler® engine to save you time and money in the long run, and excellent power for enhanced ...
-
Manufactured by Fecon, Inc.based in USA
The Fecon GL300 Geothermal Drill is a rubber track drill rig designed to meet the needs of the residential and small commercial geothermal industry. When it comes to drilling geothermal ground loops, crews want efficient access to the drill hole site, advanced drilling capabilities, and the ability to remove equipment with minimal environmental disruption. Get in. Drill down. Get out. The Fecon ...
-
Manufactured by John Deerebased in USA
The 60G’s compact size and reduced-tail-swing design enable this small-but-mighty machine to specialize in close-quarters work. But that’s not the only reason to run one. Its highly fuel-efficient, direct-injected diesel meets rigid Final Tier 4 emissions standards and is noticeably quiet so you can put it to work almost anywhere, any time. Standard-equipped with backfill blade, ...
-
Manufactured by John Deerebased in USA
You said you wanted a CTL with even bigger abilities. We heard you. The 331G's refined vertical-lift loader design rises higher and reaches farther, for quicker and easier loading. Serves up substantially greater boom and bucket breakouts, too. In fact, these large frames have more horsepower than a small backhoe or crawler, so you accomplish more with just one CTL. They also work more ...
-
Manufactured by John Deerebased in USA
You said you wanted a CTL with even bigger abilities. We heard you. The 333G's refined vertical-lift loader design rises higher and reaches farther, for quicker and easier loading. Serves up substantially greater boom and bucket breakouts, too. In fact, these large frames have more horsepower than a small backhoe or crawler, so you accomplish more with just one CTL. They also work more ...
-
Manufactured by Scag Power Equipmentbased in USA
The Scag SWZT Zero Turn Walk Behind Mower sets new standards in comfort and quality. Its outstanding operator control system, floating, easy-adjust cutter deck and smooth and powerful hydraulic drive system makes mowing a dream. In fact the SWZT may just be the smoothest walk-behind Scag has ever ...
-
Manufactured by John Deerebased in USA
Looking to get more out of your “mini ex”? Make your next compact excavator one of our G-Series. Inspired by input from equipment owners and operators like you, this 50G Compact Excavator is loaded with customer-driven enhancements. Such as a more spacious cab with a wider entryway. Larger expanse of glass for unsurpassed visibility. Fuel-saving auto-shutdown and power/economy work ...
-
Manufactured by John Deerebased in USA
With larger material-handling buckets and beefed-up performance specs, our new 844K-III Loaders deliver serious productivity. And they're built rock solid to take on the toughest aggregate and material-moving applications. Armed with insights from our Customer Advocate Group, we designed these productive machines to be even more rugged and reliable. We equipped them with improved hydraulic ...
-
Manufactured by Terexbased in USA
Stretch screeds provide infinitely variable paving widths at the touch of a button. Rigid frame construction allows for unequalled mat smoothness from an extendable ...
-
Manufactured by John Deerebased in USA
The 9009A TerrainCut Rough Mower: where productivity and control meets cut quality. Until now, using a wide area mower in the rough meant compromising on your quality of cut. With the new 9009A TerrainCut Rough mower, you can now maximize both your productivity and your cut quality while having more control over how it performs on the course. The 9009A is a five-gang, 27-inch (68.58 cm) ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you