Hydro Energy Equipment In Oregon
-
PremiumManufactured by Cornell Pump LLCbased in USA
Pelton turbines are suitable for applications with variable flows and do not require a flywheel or quick-opening bypass valve in the event of grid loss. However, they must be exhausted into the atmosphere and are typically more costly than reaction ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Reaction turbines are a cost-effective option for applications with a constant flow and a need for positive outlet pressure, like force mains. These highly efficient turbines can be paired with a flywheel or quick-opening bypass valve to address variable pressure concerns. Compared to Pelton turbines, reaction turbines are a more affordable ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
-
Manufactured by AquaHarmonics Inc.based in USA
The AquaHarmonics (AH) wave energy converter (WEC) concept is a point absorber style WEC comprised of an axisymmetric floating hull with a “winch style” interior Power Take Off (PTO) which generates electrical power by reacting against the seafloor via an anchor connected to the free end of PTO mooring line. The PTO operates in a tension only condition with a large operational stroke ...
-
Manufactured by AMPHYDRObased in USA
An entry level permanent magnet alternator. These are single phase and have about the same efficiency as the large frame Ford alternators that have been used for years. Very low maintenance and easy to use and install. They perform best for 12 and 24 volt DC applications but can be used at 48 and 120 volt DC and also wild frequency 120 to 480 volt AC for long distance transmission using a step ...
-
Manufactured by Steffen Systemsbased in USA
In a nutshell, our 3600 Bale Conversion System takes large, 8-foot long bales (either 32”x35,” 46”x35” or 46”x51”) and outputs small, 16”x18”x 24” to 44” bales. This process involves a series of slicing blades, a compression chamber, and a tying unit which automatically converts the bales and restacks them for handling. Power for the ...
-
Manufactured by Maxi Mill, Inc.based in USA
Based on the latest computer and PLC technology available, Maxi Mill® integrates 'off-the-shelf' components into a reliable, productive, and easy to use control system. At the heart of Maxi Mill® control systems are two Windows XP® based Computers communicating with one or more Programmable ...
-
Manufactured by Con-Vey, LLCbased in USA
Con-Vey Environmental specializes in hydro-electric machinery and fabricated components, including water control solutions such as radial gates, slide gates, bulkheads and automated control systems for gate movement. Con-Vey has many years of experience designing and manufacturing equipment for large and small Hydro projects. We provide a complete design/fabrication package to the prime ...
-
Manufactured by Airlift Separator / Hawker Corporationbased in USA
The Airlift Separator AL-200 can scale to almost any size operation at only a fraction of the investment of other plastic removal equipment on the market today. It even works with the existing hydraulic power supply on your screening ...
-
Manufactured by Airlift Separator / Hawker Corporationbased in USA
The Airlift Separator AL-200 can scale to almost any size operation at only a fraction of the investment of other plastic removal equipment on the market today. It even works with the existing hydraulic power supply on your screening ...
-
Manufactured by Airlift Separator / Hawker Corporationbased in USA
The Airlift Separator AL-200 can scale to almost any size operation at only a fraction of the investment of other plastic removal equipment on the market today. It even works with the existing hydraulic power supply on your screening ...
-
Manufactured by Columbia Industries, LLCbased in USA
The Fixed Installation Tipper (FIT) is custom designed for facilities that need the efficiency of a tipper in a fixed location. Fixed Installation Tippers can accommodate dumping into receiving hoppers, onto conveyor systems, into buildings, and directly to tipping floors. Columbia works directly with our customer's civil engineers to develop a layout and embed plan that is tailored to the ...
-
Manufactured by AMPHYDRObased in USA
Adjustable permanent magnetic alternator, operating efficiently on 25-300 feet of head and 2-250 gallons per minute of ...
-
Manufactured by AMPHYDRObased in USA
Step down Transformer/Rectifier Units: For use with the high voltage wild frequency AC turbines which make long distance power transmission possible on relatively inexpensive wire. These are custom built and matched to the turbine to minimize efficiency losses. For use on 12, 24, 48, 120 volt DC battery based ...
-
Manufactured by Entro Industriesbased in USA
Whether it's a large drill rig move, or a smaller specialty project, Entro provides custom-designed control solutions that are specifically designed for the application. Hydraulics and controls are designed for years of trouble-free operation around the world and in all conditions. All hydraulics are cleaned and flushed prior to testing. All systems are fully tested prior to shipping to ensure ...
-
Manufactured by AMPHYDRObased in USA
An entry level permanent magnet alternator featuring a 3-phase stator offering 20-30% more output than a comparable wound field unit. Available in 12 to 480 volts AC or DC. The AC models are wild frequency for use with a step down transformer/rectifier for long distance transmission to a battery based system. The step down unit is sold separately. They are MPPT controller compatible. Electrically ...
-
Manufactured by Betstcobased in USA
Introducing the Betstco Direct Connect Backhoe, a premium digging attachment designed to enhance the versatility and productivity of your tractor. This backhoe attachment is built for efficiency and ease of use, making it the perfect solution for a variety of digging ...
-
Manufactured by Seals Unlimited Incbased in USA
A-Bulb x (D-Hole) x B-Overall Width x C-Tail Thickness x E-Legs to Compound. Identify seal as a fully molded or factory hot vulcanized spliced corner from molded straight pieces. Include material requirements. Specify cladding thickness and degree of coverage as ...
-
Manufactured by Entro Industriesbased in USA
Entro designs custom hydraulic material handling elevators and lifts, both for traditional and specialty applications. Entro has several styles of mechanisms including scissor lifts, linear elevators, jacking systems, and hoisting systems. Lift capacity ranges from hundreds to millions of pounds. Lift stroke depends on the applications and mechanism style, but extends to multi-floor ...
-
Manufactured by Steffen Systemsbased in USA
In a nutshell, our 3600 Bale Conversion System takes large, 8-foot long bales (either 32”x35,” 46”x35” or 46”x51”) and outputs small, 16”x18”x 24” to 44” bales. This process involves a series of slicing blades, a compression chamber, and a tying unit which automatically converts the bales and restacks them for handling. Power for the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you