Hydro Energy Equipment
-
Manufactured by ULMA Forged Solutionsbased in SPAIN
ULMA supplies forged blades to various sectors and for many different applications, such as blades for cooling fans in power generation plants, gas turbines, hydroelectric turbines, etc. Blade geometry and, in some applications, the materials used to manufacture the blades make their manufacture possible in only certain forges. ...
-
Manufactured by Schwerdtel GmbHbased in GERMANY
If you want to feed from 200 liter drums.In this case we recommend a press type S6-F with pressure generated by hydraulic unit, or pressure generated pneumo-hydraulically type S6-F/PH. The pressure plate moves into the drum and presses on the surface of the material. The material is fed through an outlet hole in the pressure plate through a connecting hose to the dosing unit. The maximum feed ...
-
Manufactured by Poweram, Inc.based in USA
A Kohler Command 25 HP gasoline engine powers the Model 2613 Hydraulic Power Unit. This is a high performance V-Twin engine with overhead valves, hydraulic valve lifters, electronic ignition, a self-relieving choke/carburetor, oil cooler, duel element air cleaner, and many other advanced features. The Command 25 has a 12 volt solenoid-shift starter and a 15 amp charging ...
-
Manufactured by MV International Industrial Ovenbased in INDIA
MV International provides high quality, durable industrial ovens that can be used to carry out heating continuously and extensively for long periods. Our equipment comes with precision temperature controls through which heating can be done in desired temperature and for required period of time to get an output that is absolutely satisfactory. We offer the latest models so that our customers gain ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis turbine could be designed for the hydropower resource with various heads ranged from 10m to 500m . The water pass the runner vanes gathered in radiation and flow out in axial finally. It is recommended for the plant with flexible heads and ...
-
Manufactured by Canadian Hydro Components Ltd. (CHC)based in CANADA
Maximum output and control in higher head conditions. Specifically suited to high head hydro sites, CHC manufactures a range of conventional Kaplan turbines ranging in size from 500 mm to 3200 mm. Conventional Kaplan turbines feature adjustable turbine blades and wicket gates and are designed to optimize efficiency across a wide range of heads and flows. These turbines are arranged vertically and ...
-
Manufactured by Hydro Energy Michal Twardziszewskibased in POLAND
Propeller turbines – from 10 kW to 500 kW. We produce propeller turbines with a rotor diameter – from fi 300 mm to 1100 ...
-
Manufactured by Sunforge LLCbased in USA
The perfect controller for a variety of applications, including marine, RV, industrial, off-grid, and PV street lighting. SB3024iL model without display, SB3024DiL model with ...
-
Manufactured by Asian Electron Co., Ltd.based in CHINA
Power 700W. Surge 1400W. Dimensions (mm). L x W x H 270 x 178.6 x 81. Outlets/Sockets ...
-
Manufactured by Zhejiang Weitong Composite Material Co., Ltd.based in CHINA
Multiaxial fabrics is a kind of multi-axis and multi-layered reinforcements. layer count, orientation, weight and fiber content of the layers vary based on product line and application via polyester yarn. fabrics can be produced using multiple axis(0’, 90°, +45°, -45°), or combined with chopped mat layer.Mainly used for Pultrusion,Hand lay-up,Filament Winding and RTM ...
-
Manufactured by CW Mill Equipment Co., Inc.based in USA
Spanning over four decades, CW Mill Equipment Co., Inc. has been manufacturing electric powered grinders in addition to its diesel-powered units. CW’s 800 HP Electric HogZilla TC-1564SE is what experienced buyers are looking for today with increased efficiency, reduced maintenance, massive construction, simplicity, and steady mill RPM generating amazing production from its 46″ ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
The S82-1.5MW was designed for generating optimal power output even at sites with a modest wind speed regime. Inducted in 2006, the S82-1.5 MW is equipped with an asynchronous generator with high slip; it can operate within a limited speed range. In conjunction with the pitch system, it is possible to achieve an optimal energy yield within a wide wind range, with comparably low loads. Till its ...
-
based in NEPAL
The power plant is located about 500m downstream of the confluence of Sunkoshi river with the Bhotekoshi River in Dhuskun VDC of Sindhupalchowk district. It is about 90 Km North -East of Kathmandu along the Aranikio Highway, on the way to Tibet. Glass Fibre reinforced Plastic Pipe was used as pressure pipe for the first time in the region in this ...
-
Manufactured by O.M.P. Officina Meccanica Pignotti srlbased in ITALY
All models can also be equipped with: Weighing system for cement batching. Supporting column with gallery and inspection ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
The SNS end suction single stage pump range has been designed to exceed the highest energy efficiency regulations across all industries and also the design requirements of ISO 5199 international standard. The innovative design makes the pump more reliable while significantly reducing total cost of ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
The ATB 60.28 DD is an upwind, two-bladed wind turbine with 60 kW rated power at grid side. The turbine with its 28 m rotor diameter will is designed for wind class IIIA with 37m hub height in accordance with the Germanischer Lloyd’s Guideline for the Certification of Wind Turbines, Edition ...
-
Manufactured by Anhui Jnge Power Co.,Ltdbased in CHINA
Small, light and artistic, benefited from adopting the SMD pastern technology. Cooling fan is intellectual controlled, and its working status is controlled by CPU, which mostly increased its service life and helps to save the power consumption, improve work efficiency and lower the working ...
-
Manufactured by Tri Tool Inc.based in USA
The Model 765 Remote Volume Control Hydraulic Power Source is variable-volume (0 GPM to 15 GPM), pressure-responsive (0 to 1800 PSI), reversible-flow power unit for supplying hydraulic power to cutting and weld end preparation pipe lathes with integral hydraulic motors. A low voltage (24 volts) pendant provides stop, start, volume control, and forward/neutral/reverse flow direction control. The ...
-
Manufactured by Water Powered Technologies Ltdbased in UNITED KINGDOM
21st century Tidal Lagoon utilising zero energy Venturo Pumps and Solar arrays for affordable and sustainable low-carbon energy generation. Current tidal lagoon designs capture energy directly from the tidal range via the lagoon’s turbine housing, limiting power generation windows to incoming and outgoing ...
-
Manufactured by Framesbased in NETHERLANDS
Frames Hydraulic Power Units (HPUs) provide reliable and clean hydraulic energy to a variety of users in offshore and onshore locations. Our HPUs ensure reliable operation and control of a wide variety of equipment, including subsea controls, IWOCS, topside actuated valves, turret actuated valves, cargo handling systems, turret disconnect systems, and seal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you